DI-704UP Firmware Release Note

Firmware: v1.03b05
Hardware: All
Date: March 14, 2008

Problems Resolved: 

Remove the unnecessary option "Run VPN Wizard".


*** 1.03b01 (February 14) to 1.03b03(March 7)

Can't establish PPPoE connection with Cisco 3640 PPPoE server.

*** 1.03b01 (December 12) to 1.03b03(February 14)

1. Cannot re-connect PPTP connection with static IP if internet connection drops.

*** 1.03 (December 12) to 1.03b01(December 12)

1. PPTP/L2TP connection can't be establish normally.

*** 1.03 (December 12) to 1.03b01(December 12)

1.In the Domain Blocking, regardless of Allow or Deny, I let it loose and become the empty on field, this function can still be applied.
2.In the IPSec filter, regardless of Allow or Deny, I let it loose and become the empty on field, this function can still be applied
3.In the MAC Filters, regardless of Allow or Deny, I let it loose and become the empty on field, this function can still be applied.
4.In the URL Blocking, I let it loose and become the empty on field, this function can still be applied.
5.  Use "ntp1.dlink.com" to be default NTP server

*** 1.02b02 (December 1) to 1.03(December 12)

1. The WAN IP address or WAN gateway must check by submask.

*** 1.02b01 (Septembe 16) to 1.02b02(December 1)

1.  When IP address is "X.X.X.255" or "X.X.X.0, the UI will block it

*** 1.02 (April 8) to 1.02b01(Septembe 16).

1.  Throughput enhancement.
2.  Device without IPSec filter function but has its help information
3.  Can't use more than four PPTP VPN clients to connect to the PPTP VPN Server

*** 1.02 (Dec. 10) to 1.02(April 8).

1.A user can only open TCP port 1720 for his PC at Virtual Server, instead of indicating the PC as a DMZ host, when he wants to use Microsoft NetMeeting.
2.Support RTP traffic pass-through.
3.Router will jump a login window whenever administrator changes the password successfully in the wizard.
4.Add an "Active sessions" to display detailed information of active sessions of router.
5.Fix the following problems:
(1)Using "user" to local login can't go back correctly when clicking "Continue" button if remote management is activated.
(2)The gateway IP of router is not allowed to end with 255, such as x.x.x.255.
(3)MSN messenger doesn't work if users open port 1723 at Virtual Server.
(4)The list of Static DHCP will be incorrect when users add 15th record.

*** 1.02(Nov. 25) to 1.02(Dec. 10).

1.Fix the following problems:
   (1) LAN PCs can't access remote FTP server if router is in SPI mode.
   (2) Router can't drop PPPoE connection even though the idle time has expired.

*** 1.02(Oct. 7) to 1.02(Nov. 25).

1.Auto-detect i2eye device, and open/close port 1720 automatically.
2.Router will jump a window to remind users if they don't finish configurations of DDNS.
3.Remove Multi Global IP feature.
4.Fix the following problems:
  (1) There is a invalid value in the field of Syslog Server IP Address.
  (2) Using "user" to remote login can't go back correctly when clicking "Continue" button.

*** 1.01b4 to 1.02.

1.Rename from v1.01b4.

*** 1.01b3 to 1.01b4.

1.Fix failed items of CDRouter test.
2.Change firewall destination IP from * to real destination IP if the rule is derived from Virtual Server.
3.Support NO-IP DDNS service.
4.Support i2eye ALG.
5.Support Multi Global IP for DHCP and Static WAN type.
6.Prevent different devices from using the same XID to send DHCP request.
7.Fix the following problem:
  (1) Virtual Server doesn't work if public port and private port are not the same.

*** 1.01b2 to 1.01b3.

1.Fix the problem of IP filter if users input a IP group 192.168.0.90-192.168.0.100.
2.Fix the problem of firewall if users input a IP group 192.168.0.90-192.168.0.100.
3.Fix keep alive problem of BigPond WAN connection.
4.Fix the problem of MAC filter if user setup more than 16 rules.

*** 1.01b1 to 1.01b2.

1.Change the default connect mode to Connect-on-demand, and set the idle time to 5 minutes.
  (Note. The change will take effect after resetting configuration to factory default.)
2.Prevent router from DOS attack.
3.Mail alert feature can support Lotus Notes server.
4.Change firewall mechanisms.
6.Add D-Link web cameras(DCS-900, 1000, 2000, 3120, 5300) into default lists of Virtual Server.
7.Support XBOX.

*** 1.01 to 1.01b1.

1. Change Auto-reconnect and Dial-on-Demand functions.

*** 1.00b01 to 1.01.

1. Support EON flash.

*** 1.00 to 1.00b01

1.Add Daylight saving.
2.Add L2TP WAN type.
3.Change Domain filter UI.
4.DDNS function may cause DynDNS.org abuse.
(1)Stop continuing to update if authentication failed.
(2)Add model name and firmware version into agent information.
5.????? Router ?????? UI ??? LAN IP.
6.SNMP Bytes counter ?? 2 ? 32 ??.

*** 1.00

First release.