роблемы прошивки:

MPPE работает некорректно на PPP соединениях. Если Вы испытываете проблемы с этой версии, 
используйте прведущую.

Known issues:
MPPE dosen't work  properly on PPP connections. If you face problems problems please use previous 
verion FW.

"Customer Model,""Release Date"",""Fw Version"",""Change List"",""Command"""
"DI-824VUP+,2006/10/18,""V2.00b01"",""1. Add new PeanutHull DDNS function for new PeanutHull DDNS version."","
"DI-824VUP+,2006/12/07,""V2.00b02"",""1. Fix the issue: Customer uses GPRS modem to dial-up Internet.
                          But, customer can't enter init string:
                          AT+GDCONT=1,""""IP"""",""""internet.mts.ru"""" 
                          Device can't accept """".
"","
"DI-824VUP+,2007/02/09,""V2.00b03"",""Fix Russia issues below:

         a. Source port issue(HQ20070117000005)
         b. PPTP DNS issue(HQ20070117000005)
         c. PPTP and IPSec issue(HQ20061225000007)
         d. PPPoE Connective issue(HQ20070115000005)
         e. The issue of PPP CHAP CHALLANGE packet on DI- 
             8xx(HQ20061201000002)
"","
"DI-824VUP+,2007/02/14,""V2.00b04"",""Fix the issue below: 

1. When adding new rule to QoS and appling and restarting router, the last added rule becomes enabled and others become disabled, and also the router forgets their protocols (TCP:80 becomes *:80).
2. Because DI-804HV’s minimal lifetime is 300 seconds. Therefore, UI will block the setting when users enter the value which is lower than 300 seconds."","
"DI-824VUP+,2007/03/07,""V2.00b05"",""Fix those issues below:

1. DHCP clients can’t get IP address of secondary DNS of the device.
2. Process the IPSEC will initial the session of PPTP if both device located in the same network.
3. PPTP/L2TP connection can’t be establish normally.
4. If users enable both “anto-reconnect” and “DDNS” function in VPN function, the device can’t trigger to establish the VPN connection.
"","
"DI-824VUP+,2007/03/16,""V2.00b07"",""1. Increase the length of FQDN feature for VPN function to 25 bits.
2. Add IGMP function.
"","
"DI-824VUP+,2007/04/13,""V2.00b08"",""Fix the issue:
1. The DI-824VUP+ is configured with Dialup Network and PPPoE with Auto-backup. When DI-824VUP+ goes online over backuped, the UI of connection can’t normally show the Dial-up states.
2. Use VLC-Server for tests. DI-804HV can pass IGMP flow inside LAN. But then we close VLC-client. Flow still exist in LAN ports. 

"","
"DI-824VUP+,2007/07/05,""V2.00b09"",""When the ISDN backup line is up, if no any traffic from lan side, the ISDN line shall be dropped by idle time out. 
"","