DIR-140L RU FW Release Notes -------------------------------------------------------------------------------------------------- Firmware: FW_101RUb11_03KP2.1012 Hardware: Rev.A1 Date: 2015/01/28 New changes: 1-Fixes: Network devices/recources are not accesibale via PPTP VPN 2-Fixes: Can login to the web UI without a username and password prompt 3-Fixes: DIR-140L/640L Web-GUI security issues 4-Add: WOL feature in VIRTUAL SERVER Page -------------------------------------------------------------------------------------------------- Firmware: FW_101RUb10_03KP2.1011 Hardware: Rev.A1 Date: 2014/04/17 New changes: 1-Fixes: DIR-140L and DIR-640L L2TP disconnects issue -------------------------------------------------------------------------------------------------- Firmware: FW_101RUb09_03KP2.1011 Hardware: Rev.A1 Date: 2014/02/18 New changes: 1-Fixes: Problem with VPN IPsec 2-Fixes: DIR-140L and DIR-640L Dynamic IPSec issue -------------------------------------------------------------------------------------------------- Firmware: FW_101RUb08_03KP2.1010 Hardware: Rev.A1 Date: 2014/01/15 New changes: 1-Fixes: DIR-140L A1 ping respond issue 2-Fixes: DIR-140L A1 route issue 3-Fixes: DIR-140L PPPoE Address Mode issue -------------------------------------------------------------------------------------------------- Firmware: FW_101RUb06_03KP2.1009 Hardware: Rev.A1 Date: 2013/09/13 New changes: 1-Fixes: LAN side PC cannot ping WAN PC if use 6rd to setup IPv6. 2-Fixes: The GRE setting page of key field rule very stange 3-Fixes: Manual setup VPN of PPTP/L2TP, the remote IP range must same network with VPN server, this behavior is different with VPN setup wizard. 4-Fixes: The GRE setting page of remote IP field should not is ""option"". 5-Fixes: MAC clone address field should not allow invaild MAC address. 6-Fixes: If LAN address use sateless, the O flag always is 0, it's wrong behavior. 7-Fixes: Cannot establish VPN tunnel behind the NAT device. 8-Fixes: Does DIR-640 allow clients to access Internet through VPN connection 9-Fixes: DIR-140L IPSec NAT-T issue 10-Fixes: DIR-140L and DI-804HV IPSec problem -------------------------------------------------------------------------------------------------- Firmware: FW_101RUb05_03KP1.1008 Hardware: Rev.A1 Date: 2013/08/05 New changes: 1-Fixes: Failover cannot work if WAN side is PPPoE with connect on demand. 2-Fixes: Sometimes DUT reset to default and follow setup wizard to completed setting, DUT will dump connection fail. 3-Fixes: The internet visit history always display blank. 4-Fixes: [OBU]Internet IP and connected device information are wrong on mydlink portal. -------------------------------------------------------------------------------------------------- Firmware: FW_101RUb04_03KP1.1007 Hardware: Rev.A1 Date: 2013/07/10 New changes: 1-Fixes: After add a DHCP reservation rule, if user want to chang other LAN setting, DUT will always dump ""DHCP reservation list ip invaild"". 2-Fixes: Advance of QoS function cannot work. 3-Fixes: User connect to guest zone will get IP and gateway, but not same network . 4-Fixes: DIR-140L schedules issue-Russia. -------------------------------------------------------------------------------------------------- Firmware: FW_101RUb03_03KP1.1006 Hardware: Rev.A1 Date: 2013/06/27 New changes: 1-Fixes: Copyright year is too old. 2-Fixes: Firewall setting of DMZ function cannot work. 3-Fixes: DUT cannot auto detect WAN type after DUT reset to default. 4-Fixes: WAN PC can access virture server once only . 5-Fixes: Cannot remote management if DUT allowed to access IP is 0.0.0.0. 6-Fixes: The log page always display oldest 15 log. 7-Fixes: Internet setup wizard of connection type not match. 8-Fixes: Cannot play multicast stream even enable IPv4 multicast. 9-Fixes: Website Filter function FAIL. -------------------------------------------------------------------------------------------------- Firmware: FW_101RUb02_03KP1.1005 Hardware: Rev.A1 Date: 2013/06/11 New changes: 1-Fixes: FW101RUb01 still does not allow me to enable Keep alive when MAT traversal disabled. -------------------------------------------------------------------------------------------------- Firmware: FW_101RUb01_03KPO.1003 Hardware: Rev.A1 Date: 2013/05/31 New changes: 1-Fixes: In 5 Minutes to 24 Hours column, the record of bandwidth and session is not stable in 2nd source test. 2-Fixes: Only port 80 is stealth but others are closed. 3-Fixes: In support page, when click on advance-firewall settings, browser does not jump to firewall setting instruction column. 4-Fixes: Lan 2 PC can not access Lan 1 PC ftp server by WAN ip after enabling virtual server. 5-Fixes: After input hq\hq in pppoe service name column and capture wan packets of pppoed, packet tag is hqhq instead of hq/hq. -------------------------------------------------------------------------------------------------- Firmware: FW_100RUb10 Hardware: Rev.A1 Date: 2013/05/16 New changes: 1-Fixes: User can't change TimeZone in the settings of router. 2-Fixes: UPnP issue, the name of the device appears as ""Wireless N Home Router"", but this device is not wireless. It should be named DIR-140L. -------------------------------------------------------------------------------------------------- Firmware: FW_100RUb09beta03 Hardware: Rev.A1 Date: 2013/04/30 New changes: 1-Fixes: Can't save settings of PPTP/L2TP server, the button Save Settings didn't works. 2-Fixes: RUSSIAN DualAccess CONNECTION TYPE can't work well. 3-Fixes: Enable Keep Alive option in IPSec settings. After saving settings this option was Disabled, and can't to use this options. 4-Fixes: Tested this case, after setup ipsec both PC cannot ping each other(also cannot ping DIR-640L's LAN IP), but will see the VPN show ""Connected"" status. --------------------------------------------------------------------------------------------------