DIR-450 Firmware Release Note D-Link Firmware: v1.03 (v1.03B0010) for US and WW all region Hardware: Rev. A1 Date: 2008/Jan/23rd New 3G card support: 1.Add AnyData ADU-E100A card for Russia 2.Add PC5750 card for US 3.Add LG LDU-800 for Morocco 4.Add Pantech PX-500 for US Bug Fixed: 1.Fixed when Enable DNS relay , DDNS will not work properly. 2.Fixed DHCP server can’t be disable. 3.Fixed the virtual server is not working when enabling the MAC filter(allow mode) 4.Fixed after rebooting router, the login page is unable to displayed after count down finished. 5.Fixed the virtual server is not working after rebooting router. 6.Fixed when the DHCP range is set to 100 ~ 102, user is unable to obtain 101 and 102 address. 7.Fixed unable to save the WEP key. 8.Fixed the DNS relay doesn’t work properly . 9.Fixed schedule doesn’t work properly. 10.Fixed WAN connect scripts doesn’t work properly. 11.Fixed superG with dynamic-turbo cannot boot-up issue 12.Support RIP 13.Fixed GUI , add message when user finished wizard setup and redirect to count down page 14.Fixed local domain can’t be typing any character. 15.Fixed the schedule name can be created the same name 16.Fixed when Daylight Saving enabled, after DUT time go to Daylight Saving time, the DUT time will add eight hours. 17.Fixed if user configured Time Zone(set to +8) and manual configured time values. After DUT reboot, the time values will be added eight hours 18.Fixed if user enable virtual server for UDP port 3000, after saved then remote PC transmit UDP packet to DUT WAN port, the LAN to WAN session will be blocked. 19.Fixed Firewall L2TP pass through function failed 20.Fixed on port forwarding page and support port forwarding page, they have different descriptions for public and private port 21.Fixed send mail with schedule function failed 22.Fixed virtual server and port forwarding rule can be assign the same services 23.Change max log size limited to 400 lines 24.Fixed sometimes web cannot login.