DIR-640L RU FW Release Notes -------------------------------------------------------------------------------------------------- Firmware: FW_1.01RUb15_03MG2.1012 Hardware: Rev.A1 Date: 2015/02/12 New changes: 1-Fixes: DIR-640L A1/A2 Dynamic IPSec problem -------------------------------------------------------------------------------------------------- Firmware: FW_1.01RUb14_03MG2.1012 Hardware: Rev.A1 Date: 2015/01/28 New changes: 1-Fixes: Network devices/recources are not accesibale via PPTP VPN 2-Fixes: Can login to the web UI without a username and password prompt 3-Fixes: DIR-140L/640L Web-GUI security issues 4-Add: WOL feature in VIRTUAL SERVER Page -------------------------------------------------------------------------------------------------- Firmware: FW_1.01RUb12_03MG2.1011 Hardware: Rev.A1 Date: 2014/03/26 New changes: 1-Fixes: DIR-140L and DIR-640L L2TP disconnects issue -------------------------------------------------------------------------------------------------- Firmware: FW_1.01RUb11_03MG2.1011 Hardware: Rev.A1 Date: 2014/02/18 New changes: 1-Fixes: Problem with VPN IPsec 2-Fixes: DIR-140L and DIR-640L Dynamic IPSec issue -------------------------------------------------------------------------------------------------- Firmware: FW_1.01RUb10_03MG2.1010 Hardware: Rev.A1 Date: 2014/01/15 New changes: 1-Fixes: DIR-140L A1 ping respond issue 2-Fixes: DIR-640L PPPoE Address Mode issue -------------------------------------------------------------------------------------------------- Firmware: FW_1.01RUb09_03MG2.1010 Hardware: Rev.A1 Date: 2014/01/09 New changes: 1-Fixes: DIR-640L A1/A2 route issue -------------------------------------------------------------------------------------------------- Firmware: FW_1.01RUb08_03MG2.1010 Hardware: Rev.A1 Date: 2013/11/29 New changes: 1-Fixes: DIR-640L IGMP and wireless problem -------------------------------------------------------------------------------------------------- Firmware: FW_1.01RUb07_03MG2.1010 Hardware: Rev.A1 Date: 2013/10/02 New changes: 1-Fixes: DUT can't failover back to PPPOE connection when connect PPPOE cable to device.(Can get PPPOE IP address,but still use 3G to internet.) 2-Fixes: Reset to default,setting ipv6 to PPPOE and save settings.PPPOE username and password will become gray out,can't edit username and password. 3-Fixes: DUT will cause ios mydlink lite app crash. -------------------------------------------------------------------------------------------------- Firmware: FW_1.01RUb06_03MG2.1009 Hardware: Rev.A1 Date: 2013/09/12 New changes: 1-Fixes: After enable wireless visibility, the WPS will not be disabled. (WPS2.0 standard) 2-Fixes: The WPS count down page will keep to 1 second 3-Fixes: WPS should not auto disable when wireless security is WPA/WPA2 with AES/TKIP. 4-Fixes: LAN side PC cannot ping WAN PC if use 6rd to setup IPv6. 5-Fixes: The GRE setting page of key field rule very stange 6-Fixes: Manual setup VPN of PPTP/L2TP, the remote IP range must same network with VPN server, this behavior is different with VPN setup wizard. 7-Fixes: The GRE setting page of remote IP field should not is ""option"". 8-Fixes: MAC clone address field should not allow invaild MAC address. 9-Fixes: If LAN address use sateless, the O flag always is 0, it's wrong behavior. 10-Fixes: IxChariot cannot complete test if use Tx with Rx at same time. 11-Fixes: Does DIR-640 allow clients to access Internet through VPN connection 12-Fixes: DIR-640L WPS issue 13-Fixes: DIR-140L IPSec NAT-T issue 14-Fixes: DIR-140L and DI-804HV IPSec problem -------------------------------------------------------------------------------------------------- Firmware: FW_101RUb05_03MG1.1008 Hardware: Rev.A1 Date: 2013/08/05 New changes: 1-Fixes: User connect to guest zone, the DUT will reboot once. 2-Fixes: After reset DUT to default and follow setup wizard step by step to setting DUT completed, user still cannot scan the wireless SSID. 3-Fixes: Failover cannot work if WAN side is PPPoE with connect on demand. 4-Fixes: Sometimes DUT reset to default and follow setup wizard to completed setting, DUT will dump connection fail. 5-Fixes: The internet visit history always display blank. 6-Fixes: If block a user from mydlink portal, the MAC address will double display on network filter page. 7-Fixes: [OBU]Internet IP and connected device information are wrong on mydlink portal. -------------------------------------------------------------------------------------------------- Firmware: FW_101RUb04_03MG1.1007 Hardware: Rev.A1 Date: 2013/07/10 New changes: 1-Fixes: After add a DHCP reservation rule, if user want to chang other LAN setting, DUT will always dump ""DHCP reservation list ip invaild"". 2-Fixes: Advance of QoS function cannot work. 3-Fixes: User connect to guest zone will get IP and gateway, but not same network . 4-Fixes: DIR-140L schedules issue-Russia. -------------------------------------------------------------------------------------------------- Firmware: FW_101RUb03_03MG1.1006 Hardware: Rev.A1 Date: 2013/06/27 New changes: 1-Fixes: Copyright year is too old. 2-Fixes: Firewall setting of DMZ function cannot work. 3-Fixes: DUT cannot auto detect WAN type after DUT reset to default. 4-Fixes: WAN PC can access virture server once only . 5-Fixes: Cannot remote management if DUT allowed to access IP is 0.0.0.0. 6-Fixes: The log page always display oldest 15 log. 7-Fixes: Internet setup wizard of connection type not match. 8-Fixes: Cannot play multicast stream even enable IPv4 multicast. 9-Fixes: Website Filter function FAIL. -------------------------------------------------------------------------------------------------- Firmware: FW_101RUb02_03MG1.1005 Hardware: Rev.A1 Date: 2013/06/11 New changes: 1-Fixes: FW101RUb01 still does not allow me to enable Keep alive when MAT traversal disabled. 2-Fixes: DIR-640L incorrect logging. 3-Fixes: Windows7 clients can't establish PPTP connection with DIR-640L. -------------------------------------------------------------------------------------------------- Firmware: FW_101RUb01_03MGO.1003 Hardware: Rev.A1 Date: 2013/05/30 New changes: 1-Fixes: It does not auto jump to clicked hyper-link page while clicking on Setup-GRE and Advanced-Firewall Setting. 2-Fixes: Only port 80 is stealth but others are closed. 3-Fixes: After unckecking Enable Wireless, WLAN LED does not go off, it needs rebooting to take effect. 4-Fixes: If change VPN client DHCP subnet into different subnet between Network Settings, dial in VPN client is unable to access internet. 5-Fixes: Lan PC can not access other lan pc's ftp service by WAN IP. 6-Fixes: Only WEP security will automatically disable WPS function, but WPA/TKIP and WPA2/TKIP does not -- Support WPS2.0 standard. 7-Fixes: Go back original NAT Traversal design. -------------------------------------------------------------------------------------------------- Firmware: FW_100RUb06 Hardware: Rev.A1 Date: 2013/05/16 New changes: 1-Fixes: User can't change TimeZone in the settings of router. 2-Fixes: When using the VPN wizard not established a PPTP/L2TP connection. We found that the ""Authentication Protocol"" and user were not selected and created by the Wizard. 3-Fixes: UPnP issue, the name of the device appears as ""Wireless N Home Router"", but this device is not wireless. It should be named DIR-640L. -------------------------------------------------------------------------------------------------- Firmware: FW_100RUb05beta01 Hardware: Rev.A1 Date: 2013/04/30 New changes: 1-Fixes: Can't save settings of PPTP/L2TP server, the button Save Settings didn't works. 2-Fixes: RUSSIAN DualAccess CONNECTION TYPE can't work well. 3-Fixes: Enable Keep Alive option in IPSec settings. After saving settings this option was Disabled, and can't to use this options. 4-Fixes: Tested this case, after setup ipsec both PC cannot ping each other(also cannot ping DIR-640L's LAN IP), but will see the VPN show ""Connected"" status. --------------------------------------------------------------------------------------------------