/*------------------------ Software Release Note ------------------------------ * This document is the Standard Format for Software Release Note. * * * ----------------------------------------------------------------------------- * Date Version Description Author * ============================================================================= * 2005/08/16 1.0 Initial Version Angus Yang * 2005/09/15 1.1 Add [FW-VER] for F3 TP Angus Yang * *----------------------------------------------------------------------------*/ ******************************************************************************** *[PRODUCT NAME] : D-Link, DES-1228P * ******************************************************************************** ________________________________________________________________________________ RELEASE VERSION : 1.31.01 RELEASE DATE : 2008/12/15 RELEASE BY : George Huang ________________________________________________________________________________ [CHECK-CODE] : BE0A [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : athena:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-31-01 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.31.01 ________________________________________________________________________________ New Features ------------- N/A Bug Fixed: ------------- 1. Fixed the bug that PING/Web access is fail when deleting VLAN on Asymmetric VLAN mode. Changed: ------------- N/A Note: ------------- N/A Known issues: ------------- N/A ________________________________________________________________________________ RELEASE VERSION : 1.31.00 RELEASE DATE : 2008/12/02 RELEASE BY : George Huang ________________________________________________________________________________ [CHECK-CODE] : 33F6 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : athena:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-31-00 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.31.00 ________________________________________________________________________________ New Features ------------- N/A Bug Fixed: ------------- 1. Fix the bug that management vlan does not work if users apply management VLAN to vlan group which exceeds the 32th vlan group. 2. Fixed the 802.1x bug that switch is not able to authenticate clients. There is problem with 802.1X authentication. Users are able to do 802.1X authentication through switch in the beginning. But some of these users can not do 802.1X authentication again after few days. Changed: ------------- N/A Note: ------------- N/A Known issues: ------------- N/A ________________________________________________________________________________ RELEASE VERSION : 1.30.T17 RELEASE DATE : 2008/11/26 RELEASE BY : George Huang ________________________________________________________________________________ [CHECK-CODE] : 1A35 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : athena:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-30-T17 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.30.T17 ________________________________________________________________________________ New Features ------------- N/A Bug Fixed: ------------- 1. Clients behind the switch will not get any IP from the DHCP server. 2. Wrong checking on trunk member while setting port STP mode on WEB UI. 3. Fixed the issue that switch can not forward AppleTalk Broadcast packet (DA is 09-00-07-ff-ff-ff). Changed: ------------- N/A Note: ------------- N/A Known issues: ------------- N/A ________________________________________________________________________________ RELEASE VERSION : 1.30.17 RELEASE DATE : 2008/09/22 RELEASE BY : George Huang ________________________________________________________________________________ [CHECK-CODE] : 3BC7 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : athena:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-30-17 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.30.17 ________________________________________________________________________________ New Features ------------- N/A Bug Fixed: ------------- 1. Fixed the bug that PING is unresponsive. If DWL3140AP is connected to DES-1228P and the switch is rebooted, the switch becomes unresponsive. Changed: ------------- N/A Note: ------------- N/A Known issues: ------------- N/A ________________________________________________________________________________ RELEASE VERSION : 1.30.16 RELEASE DATE : 2008/08/29 RELEASE BY : George Huang ________________________________________________________________________________ [CHECK-CODE] : EC48 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : athena:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-30-16 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.30.16 ________________________________________________________________________________ New Features ------------- N/A Bug Fixed: ------------- 1. Fixed LLDP initial issue. If enable LLDP function than will cause all ports blocked when re-power on switch. Changed: ------------- N/A Note: ------------- N/A Known issues: ------------- N/A Internal Bug Fixed: ------------------- N/A ________________________________________________________________________________ RELEASE VERSION : 1.30.15 RELEASE DATE : 2008/08/01 RELEASE BY : George Huang ________________________________________________________________________________ [CHECK-CODE] : D0F1 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : athena:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-30-15 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.30.15 ________________________________________________________________________________ New Features ------------- N/A Bug Fixed: ------------- 1. Smart switch can't get IP address from DHCP server on these routers of DIS-655 and DFL-800 when smart switch sends DHCP packet with source ip 192.168.0.1. 2. User can't config VLAN via Firfox 3 browser on Linux Host. Changed: ------------- N/A Note: ------------- N/A Known issues: ------------- N/A ________________________________________________________________________________ RELEASE VERSION : 1.30.14 RELEASE DATE : 2008/07/23 RELEASE BY : George Huang ________________________________________________________________________________ [CHECK-CODE] : E07F [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : athena:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-30-14 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.30.14 ________________________________________________________________________________ New Features ------------- N/A Bug Fixed: ------------- 1. The CPU hang on the web page until repower on device when modifying system port speed settings. 2. The control port is authrized, unplug the port the status will remain in "Authrized" even after the pass the reauthrize period. 3. Enable 802.1x and set Re-auth period to 25; enable STP. The control port cannot connect to to the device. 4. Cannot block the 1x port after authentication fail. V1.30.13 1. Fix the bug that switch cannot get IP from DHCP server on these DIR655/DIR615 router. V1.30.12 1. Fixed 10/100M link speed led display too slow issue. V1.30.11 1. Fix QOS priority issue. 2. The IGMP Snooping cannot execute the leave operation when enabling asymmetric VLAN. 3. ADDING the workaround for passing UDP throughput test. 1.20.14 1. Fix the issue for "Correct the DHCP client to handle the state of DHCP-NAK". V1.30.10 1. Improve the low throughput under UDP multiple to one test. 2. LED no link after testing cable diagnostics funciton. Changed: ------------- N/A Note: ------------- N/A Known issues: ------------- N/A ________________________________________________________________________________ RELEASE VERSION : 1.30.13 RELEASE DATE : 2008/6/13 RELEASE BY : George Huang ________________________________________________________________________________ [CHECK-CODE] : CAA9 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : athena:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-30-13 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.30.13 ________________________________________________________________________________ New Features ------------- N/A Bug Fixed: ------------- 1. Fix the bug that switch cannot get IP from DHCP server on these DIR655/DIR615 router. Changed: ------------- 1. Due to the lack of FLASH material. So add the FLASH driver support. - INTEL: JS28F160C3TC/JS28F160C3BC (2MB) Note: ------------- N/A Known issues: ------------- N/A ________________________________________________________________________________ RELEASE VERSION : 1.30.12 RELEASE DATE : 2008/5/08 RELEASE BY : George Huang ________________________________________________________________________________ [CHECK-CODE] : 1868 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : athena:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-30-12 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.30.12 ________________________________________________________________________________ New Features ------------- N/A Bug Fixed: ------------- 1. Fixed 10/100M link speed led display too slow issue. Changed: ------------- N/A Note: ------------- N/A Known issues: ------------- N/A ________________________________________________________________________________ RELEASE VERSION : 1.30.11 RELEASE DATE : 2008/4/30 RELEASE BY : George Huang ________________________________________________________________________________ [CHECK-CODE] : 6062 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : athena:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-30-11 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.30.11 ________________________________________________________________________________ New Features ------------- N/A Bug Fixed: ------------- 1. Fix QOS priority issue. 2. The IGMP Snooping cannot execute the leave operation when enabling asymmetric VLAN. 3. ADDING the workaround for passing UDP throughput test. Changed: ------------- N/A Note: ------------- N/A Known issues: ------------- N/A ________________________________________________________________________________ RELEASE VERSION : 1.20.14 RELEASE DATE : 2008/4/14 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : athena:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-20-14 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.20.14 ________________________________________________________________________________ New Features ------------- Bug Fixed: ------------- 1.Fix the issue for "Correct the DHCP client to handle the state of DHCP-NAK". Changed: ------------- Note: ------------- Known issues: ------------- ________________________________________________________________________________ RELEASE VERSION : 1.30.10 RELEASE DATE : 2008/4/1 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : athena:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-30-10 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.30.10 ________________________________________________________________________________ New Features ------------- Bug Fixed: ------------- 1. Improve the low throughput under UDP multiple to one test. 2. LED no link after testing cable diagnostics funciton. Changed: ------------- Note: ------------- Known issues: ------------- ________________________________________________________________________________ RELEASE VERSION : 1.30.09 RELEASE DATE : 2008/3/5 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-30-09 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.30.09 ________________________________________________________________________________ New Features ------------- Bug Fixed: ------------- 1.Fix the issue that can't link when change fiber module from 100M to 1G. Changed: ------------- Note: ------------- Known issues: ------------- ________________________________________________________________________________ RELEASE VERSION : 1.30.08 RELEASE DATE : 2008/2/26 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-30-08 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.30.08 ________________________________________________________________________________ New Features ------------- Bug Fixed: ------------- 1.Fix Cable diagnostics bug: *Reduce this time in 5 second when doing cable diagnostics. *Classify impedance mismatch as good cable and display the distance in cable length column instead of cable fault distance column. *if no cable plugs in switch side or the cable length is under 2m, please display "No Cable" in test result. 2.Revise the wrong title issue in Examples for Asymmeric VLAN web page. 3.Fixed GUI QOS Queuing mechanism issue. QOS can't change Queuing mechanism from Strict Priority to WRR. Changed: ------------- 1.Change GUI cable diagnostics description: a. Cable Length : <50 50~80 80~100 >100 N/A b. Change from "The maximum cable length is limited to 100 meters" to "The maximum cable length is limited to 130 meters". Note: ------------- Known issues: ------------- ________________________________________________________________________________ RELEASE VERSION : 1.30.07 RELEASE DATE : 2008/1/23 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-30-07 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.30.07 ________________________________________________________________________________ New Features ------------- Bug Fixed: ------------- 1.Change default QoS from WRR to Strict priority. 2.Delete port priority row form port setting page. Changed: ------------- Note: ------------- Known issues: ------------- ________________________________________________________________________________ RELEASE VERSION : 1.30.06 RELEASE DATE : 2008/1/15 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-30-06 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.30.06 ________________________________________________________________________________ New Features ------------- Bug Fixed: ------------- .[TSDBUG #45] Disable IGMP State fail when we create 256 VLANs. .[TSDBUG #50] IGMP snooping enable, Leave Time is 0, pc send join -> leave -> join , DUT no respond, CPU LED no action. .[TSDBUG #51] When Querier State enable, Leave Time is 0, DUT leave time can not follow "(Robustness Variable-1)* Last member Query Interval+ Max respond time + Leave time" value to leave multicast group.( test it with mgen) .[TSDBUG #52] When use opera browser In Qos, we setting is DSCP-WRR, but the initial Qos page is 802.1p Changed: ------------- Note: ------------- Known issues: ------------- ________________________________________________________________________________ RELEASE VERSION : 1.25.00 RELEASE DATE : 2008/1/14 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-25-00 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.25.00 ________________________________________________________________________________ New Features ------------- Bug Fixed: ------------- Changed: ------------- Note: ------------- Change power guardband from 15.4W to 8.4W for Hynix(special case). Known issues: ------------- ________________________________________________________________________________ RELEASE VERSION : 1.30.05 RELEASE DATE : 2008/1/7 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-30-05 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.30.05 ________________________________________________________________________________ New Features ------------- Bug Fixed: ------------- .[TSDBUG #44] After update firmware from v1.20.03 to v1.30.04, can't enable IGMP Snooping function, need delete temporary internet files. .[TSDBUG #45] Disable IGMP State fail when we create 256 VLANs. .[TSDBUG #46] Sometimes we enable IGMP function (IGMP Query state enable) and we repeat set VLAN2 IGMP State to disable and enable, we find the device CPU no respond and System LED can't blink. .[TSDBUG #47] Sometimes we enable IGMP function (IGMP Query state enable) and we set one of the VLAN1 member to static router port and repeat set VLAN2 IGMP State to disable and enable then host transmit IGMP report and leave packets to VLAN2 of the device, we find the device CPU no respond and System LED cannot blink. .[TSDBUG #48] We enable IGMP function (IGMP Query state enable) and we disable VLAN2 IGMP state, we find VLAN1 IGMP cannot transmit general query. .[TSDBUG #49] We set 802.1x enable and port 8 enable access control, then reboot DES1228P, client PC can ping DUT with Unauthorized. Changed: ------------- Note: ------------- Known issues: ------------- ________________________________________________________________________________ RELEASE VERSION : 1.20.13 RELEASE DATE : 2008/1/7 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-20-13 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.20.13 ________________________________________________________________________________ New Features ------------- Bug Fixed: ------------- 1.Disable IGMP State fail when we create 256 VLANs. 2.Sometimes we enable IGMP function (IGMP Query state enable) and we repeat set VLAN2 IGMP State to disable and enable, we find the device CPU no respond and System LED can't blink. 3.Sometimes we enable IGMP function (IGMP Query state enable) and we set one of the VLAN1 member to static router port and repeat set VLAN2 IGMP State to disable and enable then host transmit IGMP report and leave packets to VLAN2 of the device, we find the device CPU no respond and System LED cannot blink. 4.We enable IGMP function (IGMP Query state enable) and we disable VLAN2 IGMP state, we find VLAN1 IGMP cannot transmit general query. Changed: ------------- Note: ------------- Known issues: ------------- ________________________________________________________________________________ RELEASE VERSION : 1.30.04 RELEASE DATE : 2007/12/26 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-30-04 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.30.04 ________________________________________________________________________________ New Features ------------- Bug Fixed: ------------- .[TSDBUG #40] After delete VID2 (VID2 number:1~8, untag port), control PC(port 28) ping DUT fail. .[TSDBUG #41] After add VID2 (VID2 exclude any number port), control PC(port 28) ping DUT fail. .[TSDBUG #42] After create 189 VLANs (VID & number:189), 802.1Q VLAN web UI can't display, other item normal, like 802.1Q Management VLAN. .[TSDBUG #43] Select broadcast threshold and press Apply, broadcast storm control function error, but restart port negotiation, broadcast storm control function pass. Changed: ------------- Add IGMP Query state IGMP Query state enable: 1.DUT will send general query. 2.When DUT receive leave packets, DUT will send spcial Query and leave time must cost "(Robustness Variable-1)* Last member Query Interval+ Max respond time + Leave time" value to leave multicast group. IGMP Query state disable: 1.DUT won't send general query. 2.When DUT receive leave packets, DUT won't send spcial Query and leave time just cost "IGMP Leave time" value to leave multicast group. Note: ------------- Known issues: ------------- ________________________________________________________________________________ RELEASE VERSION : 1.30.03 RELEASE DATE : 2007/11/27 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-30-03 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.30.03 ________________________________________________________________________________ New Features ------------- Bug Fixed: ------------- .[TSDBUG #14] We find IGMP Snooping Query Interval function no work. .[TSDBUG #15] We find IGMP Snooping Max response Time function no work. .[TSDBUG #16] We find IGMP Snooping Last Member Query Interval function no work. .[TSDBUG #17] We find the IGMP Snooping Robustness Variable Function no work. Changed: ------------- Note: ------------- Not bug: .[TSDBUG #19] IEEE802.1X Re-authorize function disable no work. Please see 1.30.02 to update TSD-bug list. Known issues: ------------- ________________________________________________________________________________ RELEASE VERSION : 1.20.12 RELEASE DATE : 2007/11/26 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [N/A] [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-20-12 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.20.12 ________________________________________________________________________________ New Feature: ------------- Bug Fixed: ------------- 1.Fix the LED shut down bug. *Function HW_SetBcastCtrl_Rate in hwdrv.c, a variable is not initiated. Changed: ------------- Note: ------------- Known issues: ------------- Not bug: ------------- ________________________________________________________________________________ RELEASE VERSION : 1.20.11 RELEASE DATE : 2007/11/22 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [N/A] [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-20-11 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.20.11 ________________________________________________________________________________ New Feature: ------------- Bug Fixed: ------------- 1.Fix issues in IGMP Snooping. - Send General Query by Query interval. - When leave message recieve, follow standard rule to send specific query packets. - Fix IGMP function enable that cause DUT ping no response. - If users utilize IGMP Snooping with the topology like or similar to Figure 1, the network may cause ping no response when router timeout. ______________ ___________ ___________ ______________ | | | | | | | | | Media Center |------| DUT1 |------| DUT2 |------| IGMP Host | |_____________ | |___________| |___________| |_____________| Figure 1. 2.Improve the performance of DISCOVERY/SNMP Trap. - Use SNMP Trap Settings or Trap Settings for SmartConsole, will cause delay of PING response response. Now check port trap event (every time 4 ports) every 3 seconds. 3.Fix Logic in issue. - When log in the device control interface in web browser , then reset device and refresh web browser. User won't need password to log in the web. Changed: ------------- Note: ------------- Known issues: ------------- Not bug: ------------- ________________________________________________________________________________ RELEASE VERSION : 1.20.10 RELEASE DATE : 2007/11/8 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [N/A] [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-20-10 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.20.10 ________________________________________________________________________________ New Feature: ------------- Bug Fixed: ------------- 1.DUT has no response when add or delete VLAN without any member. **Definition of variable in SDK too small. 2.Fix issues in IGMP Snooping. 1.Send General Query by Query interval. 2.When leave message recieve, follow standard rule to send specific query packets. 3.Fix IGMP function enable that cause DUT ping no response. Changed: ------------- Note: ------------- Known issues: ------------- Not bug: ------------- ________________________________________________________________________________ RELEASE VERSION : 1.20.09 RELEASE DATE : 2007/10/26 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [N/A] [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-20-9 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.20.09 ________________________________________________________________________________ New Feature: ------------- Bug Fixed: ------------- 1. When multicast address is 239.255.255.1. The flooding supports to stop when a client report join message, but it is not. It keeps flooding to all ports. Changed: ------------- Note: ------------- Known issues: ------------- Not bug: ------------- ________________________________________________________________________________ RELEASE VERSION : 1.10.05 RELEASE DATE : 2007/10/23 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [N/A] [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-10-5 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.10.05 ________________________________________________________________________________ New Feature: ------------- Bug Fixed: ------------- 1. When Discover Trap or SNMP Trap function enable. PC can't access to switch after 2 days. Changed: ------------- Note: ------------- Known issues: ------------- Not bug: ------------- ________________________________________________________________________________ RELEASE VERSION : 1.30.02 RELEASE DATE : 2007/10/02 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-30-02 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.30.02 ________________________________________________________________________________ New Features ------------- 1. DSCP QoS. Bug Fixed: ------------- .[TSDBUG #6] We use 30cm fault cable(break "white-green" cable) to connect from DUT's 100M port to another switch's 100M port. Pair 1 and 2 will show "Open in Cable." And Cable Fault Distance (meters) sometimes will up to 181 but after retest it will back to 0 or 1. .[TSDBUG #7] We use 30cm fault cable(break "white-green" cable) to connect from DUT's 100M port to another switch's Giga port. Pair 1 and 2 will show "Open in Cable." .[TSDBUG #23] We recommend "excluding" change to "Excluding below: .[TSDBUG #31] If we search Port dynamic forwarding table, we fine the Web Control UI auto logout. .[TSDBUG #32] Smart Wizard (Password Settings)When password include "blank", DUT can cot login.But setting from "Password Access Control" page, is ok. .[TSDBUG #33] key in bad value on System Information , then click IP Information's apply button, will show warning message. .[TSDBUG #34] key in bad value on System Information , then click IP Information's apply button, will show warning message. .[TSDBUG #35] If we create VLAN2 to management VLAN and VLAN2 member is 1~28 untag port (default VLAN member port28 tag port) then we remove port1~4 from VLAN2 member and create VLAN3 member port1~4 to Management VLAN, we find the device crash and System LED no work when we try to login device from VLAN3 member ports. .[TSDBUG #36] If two device uplink via trunk port(25~28), we find discovery one device via smartconsole utility. Changed: ------------- 1.Remove Auto VoIP function. Note: ------------- Not Bug: .[TSDBUG #37] IXIA module power is over 8W, then switch power limit setting Class2, but status is show Normal. .[TSDBUG #38] When Switch power limit setting Class2, then IXIA module power don't over spec, the status show "Over current" sometime. .[TSDBUG #39] When Switch power limit setting Class3, then IXIA module power don't over spec, the status show "Over current" sometime. Don't fix(Auto VoIP disable) .[TSDBUG #26] D-LINK request the Auto VoIP function must support SIP,MGCP,SCCP include others VoIP protocol packets(i.e RTP/RTCP/..). .[TSDBUG #27] We find the VoIP Packets is highest priority not high priority, please modify the Auto VoIP describe. Please retry: .[TSDBUG #30] DUT can't log frames which size over 1700 Bytes into Frame too longs in Port Statistics. Known issues: ------------- .[TSDBUG #3] ANVL Spanning Tree Test. The test have 7 fail. ________________________________________________________________________________ RELEASE VERSION : 1.30.01 RELEASE DATE : 2007/09/05 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-30-01 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.30.01 ________________________________________________________________________________ New Features ------------- 1. Asymetric VLAN. Bug Fixed: ------------- .[TSDBUG #1] The function(Managment VLAN) don't work. .[TSDBUG #2] We find Login timeout page show problem in the Smart Wizard Page. (Size asymmetric) .[TSDBUG #10] Although connect from DUT's 100M port to another switch can't test Pair 3 and 4 but it will show "Test Fail." I suggest change the message to "N/A." .[TSDBUG #13] IP Setting issue. .[TSDBUG #18] We check the IGMP Snooping Robustness Variable default range is 2~255 not 1~255 and default value is 2. .[TSDBUG #20] shoud be "configure", not cinfigure. .[TSDBUG #24] Please change "can not" to "cannot". (D-LINK request before) .[TSDBUG #25] We find Auto VoIP MGCP default Port just only support 2427. RFC 3435 * by the Call Agents, to the default MGCP port for gateways, 2427. * by the Gateways, to the default MGCP port for Call Agents, 2727. .[TSDBUG #27] We find the VoIP Packets is highest priority not high priority, please modify the Auto VoIP describe. .[TSDBUG #28] If we create 257 VLAN groups (Over max VLAN groups setting), the Web UI doesn't show any warning message then we create VID 257 VLAN again, we find the Switch no respond. .[TSDBUG #29] If we create 256 VLAN Groups and eable IGMP Function then move VLAN Settings of IGMP Snooping table scoll bar, we find the VLAN State GUI show error. Changed: ------------- Note: ------------- Not Bug: Cable Diagnostic: .[TSDBUG #4] We use 60cm normal cable to connect from DUT's Giga port to another switch's Giga port. Cable Length(Meters) always show < 50 and show "The Cable Fault Distance is caculated from switch side" in the bottom. ->The minimum value is "<50cm". .[TSDBUG #5] We use 30cm fault cable(break "white-green" cable) to connect from DUT's Giga port to another switch's 100M port. Pair 3 and 4 will show s"hort in Cable." ->The switch's pair 3 & 4 always short. .[TSDBUG #9] When we use fault cable to test, "Cable Length (meters)" always show N/A. ->If the cable is broken or link speed is not 1G. "Cable Length (meters)" always show N/A. .[TSDBUG #11] If we use two DUT for UP-Link, use another DUT to test the port which connect two DUT. It will show nothing and show "The Cable Fault Distance is caculated from switch side" in the bottom. ->Not bug,Normal behavior. Browser: .[TSDBUG #12] Page show problem in the SNMP Settings. (Size asymmetric) ->Browser limitation. .[TSDBUG #22] If we logout the Web Control UI, we find just only IE Brower show logout warning message, other Web Browers cannot show this warning message. ->Browser limitation. D-Link Wording .[TSDBUG #23] We recommend "excluding" change to "Excluding below: ->D-Link approve, we will not modify it. Known issues: ------------- ________________________________________________________________________________ RELEASE VERSION : 1.30.00 RELEASE DATE : 2007/08/01 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-30-00 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.30.00 ________________________________________________________________________________ New Features ------------- 1. Management VLAN. 2. STP, Edge, Disable modes for per port settings in Spanning Tree function. 3. Trusted Host. 4. Auto VoIP. 5. Cable Diagnoistic. 6. F/W upgrade/configuration in SNMP browser. 7. Hyperlink of D-Link support in banner. 8. Smart Wizard for the initial settings. 9. Refine wording about pop-up message. 10.Don't show the model name before logining GUI. 11.Update Device Information page with scroll bar style. Bug Fixed: ------------- 1. Looping on the solution of DIAMOND + OPAL 2. Remote access control through Web GUI, and the URL only shows IP address instead of file path. 3. Static MAC function:If MAC Address which user key in all are random code, system will crash. 4. It must shows correct CPU status when uses SNMP brower, corrects the index info 64. 5. Remove the PHY diag from initialization in hwdrv.c. 6. Fix QoS abnormal rate issue on DIAMOND ports. 7. Fix the issue of host timeout not synchronous in IGMP Snooping. Macro define issue for IGS_VIDX_HASH_NUMBER, IGS_MCAST_FWD_TABLE_SIZE IGS_VIDX_HASH_NUMBER 256 for 28/52/28P IGS_VIDX_HASH_NUMBER 512 for 16/24/48 8. Back config time out issue. 9. The side effect caused by fixing issue of "Link/Act LED behavior is reversed" Side effect: Port 1~24 speed setting is 100M Full / 100M Half, the 100Mbps speed LED is bright even no connection. Changed: ------------- 1. SDK version update from v1.4.1 to v1.6.8 Note: ------------- 1. Because the firmware size is to large, we should update total image in this version to relocate the memory for new firmware. Known issues: ------------- ________________________________________________________________________________RELEASE VERSION : 1.20.08 RELEASE VERSION : 1.20.08 RELEASE DATE : 2007/07/06 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [N/A] [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-20-8 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.20.08 ________________________________________________________________________________ New Feature: ------------- Bug Fixed: ------------- 1.Switch authentication function error. Changed: ------------- 1.Disable DSCP QoS feature. 2.Disable Qos Mode Change select. Note: ------------- Known issues: ------------- Not bug: ------------- ________________________________________________________________________________RELEASE VERSION : 1.20.07 RELEASE VERSION : 1.20.07 RELEASE DATE : 2007/07/02 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-20-7 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.20.07 ________________________________________________________________________________ New Feature: ------------- 1.Add DSCP QoS feature. 2.Add Qos Mode Change select. Bug Fixed: ------------- Changed: ------------- Note: ------------- Known issues: ------------- Not bug: ------------- ________________________________________________________________________________RELEASE VERSION : 1.10.03 RELEASE VERSION : 1.10.03 RELEASE DATE : 2007/06/22 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-10-3 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.10.03 ________________________________________________________________________________ New Feature: ------------- Bug Fixed: ------------- 1. Fix DES-1228P compatibility issue with DEM-311GT Rev.C1. Changed: ------------- Note: ------------- Known issues: ------------- Not bug: ------------- ________________________________________________________________________________RELEASE VERSION : 1.20.06 RELEASE VERSION : 1.20.06 RELEASE DATE : 2007/06/22 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-20-6 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.20.06 ________________________________________________________________________________ New Feature: ------------- Bug Fixed: ------------- 1. Fix DES-1228P compatibility issue with DEM-311GT Rev.C1. Changed: ------------- Note: ------------- Known issues: ------------- Not bug: ------------- ________________________________________________________________________________RELEASE VERSION : 1.20.05 RELEASE VERSION : 1.20.05 RELEASE DATE : 2007/06/13 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-20-5 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.20.05 ________________________________________________________________________________ New Feature: ------------- Bug Fixed: ------------- 1. LLDP cause NETWORK SYS crash problem. Changed: ------------- 1. Store LLDP setting. Note: ------------- Known issues: ------------- Not bug: ------------- ________________________________________________________________________________RELEASE VERSION : 1.20.04 RELEASE VERSION : 1.20.04 RELEASE DATE : 2007/05/17 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-20-4 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.20.04 ________________________________________________________________________________ New Feature: ------------- Bug Fixed: ------------- 1. Remote access bug. 2. IPv6 cann't be forwarded. Changed: ------------- Note: ------------- Known issues: ------------- Not bug: ------------- ________________________________________________________________________________RELEASE VERSION : 1.10.02 RELEASE VERSION : 1.10.02 RELEASE DATE : 2007/04/25 RELEASE BY : Jason Cheng ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-10-02 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.10.02 ________________________________________________________________________________ New Feature: ------------- Bug Fixed: ------------- 1. Remote access bug. 2. IPv6 cann't be forwarded. Changed: ------------- Note: ------------- Known issues: ------------- Not bug: ------------- ________________________________________________________________________________RELEASE VERSION : 1.20.03 RELEASE VERSION : 1.20.03 RELEASE DATE : 2007/03/30 RELEASE BY : Brian Ke ________________________________________________________________________________ [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : cvsserver:/wss -Module : platform/des1228p -TAG : DES1228P-REL1-01-03 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : [N/A] ________________________________________________________________________________ New Feature: ------------- Bug Fixed: ------------- .[TSDBUG #12] We find the IGMP Robustness unit error not "sec". Changed: ------------- Note: ------------- Known issues: ------------- . [TSDBUG #3] Sometimes if we modify one AP config setting, we find others AP will auto reboot again in the same switch. -> The bug is a concurrent problem. Row orders of LLDP tables are changed often during AP rebooting time. If polling LLDP tables at this moment, only temporarily data are got and the status is only partially updated. We suggest that user should refresh manually after setting AP configurations to get the updated topology information to avoid this problem. Not bug: ------------- . [TSDBUG #7, #8, #9, #11] is normal LLDP behavior. ________________________________________________________________________________RELEASE VERSION : 1.20.02 RELEASE VERSION : 1.20.02 RELEASE DATE : 2007/03/13 RELEASE BY : Brian Ke ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [PART-NO] : [CVS] : -Root : /usr/local/cvsroot -Module : /WSS/platform/des1228p -TAG : DES1228P-REL1-20-02 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.20.02 ________________________________________________________________________________ New Feature: ------------- Bug Fixed: ------------- .[TSDBUG #10] We find the STP Bridge priority unit is sec. .[NMS BUG#78] If we set lldpConfigManAddrPortsTxEnable setting of the switch to disable, we find the WLAN Manager scan switch show AP and IP address error. Changed: ------------- Note: ------------- .[TSDBUG #6] is caused by NMS software. Known issues: ------------- Not bug: ------------- . [TSDBUG #7, #9, #11] is normal LLDP behavior. ________________________________________________________________________________RELEASE VERSION : 1.20.00 RELEASE VERSION : 1.20.00 RELEASE DATE : 2007/01/17 RELEASE BY : Brian Ke ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [PART-NO] : [CVS] : -Root : /usr/local/cvsroot -Module : /WSS/platform/des1228p -TAG : DES1228P-REL1-20-00 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.20.00 ________________________________________________________________________________ New Feature: ------------- 1. Add 802.1ab LLDP (Link Layer Discovery Protocol) functions and web UI. 2. Add Anti-Rogue AP functions. - Add LLDP global setting on web page under the "Configuration Tree Node". - Add a quick link at home page. (i.e. "Device Information" web page) - LLDP can be controled via NMS. (i.e. Add LLDP global setting on MIBs based on the latest DES-1228P/REV. A1 MIBs.) - Default LLDP function is disabled. - The known issue about IEEE 802.1x and Anti-Rogue affect with each other. We should add the note on NMS to notify user the condition for the wireless switch application. The Web page only shows the authentication status of IEEE 802.1x and configuration status. NMS shows the authentication status of Anti-Rogue and configuration status and adds the note to illustrate the application condition. Bug Fixed: ------------- . Fix Link/Act and Speed LED misplacement issue. Changed: ------------- Note: ------------- Known issues: ------------- Not bug: ------------- ________________________________________________________________________________RELEASE VERSION : 1.10.01 RELEASE VERSION : 1.10.01 RELEASE DATE : 2007/01/11 RELEASE BY : Brian Ke ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [CVS] -Root : cvsserver:/WSS -Module : platform/des1228p -TAG : DES1228P-REL1-10-01 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.10.01 ________________________________________________________________________________ New Feature: ------------- Bug Fixed: ------------- 1. Fix the Link/Act and Speed LED misplace bug. Changed: ------------- Note: ------------- Known issues: ------------- Not bug: ------------- ________________________________________________________________________________RELEASE VERSION : 1.00.05 RELEASE VERSION : 1.00.05 RELEASE DATE : 2006/08/17 RELEASE BY : Huse Ho ________________________________________________________________________________ [CHECK-CODE] : 26AA [CHECKSUM] : [N/A] [PART-NO] : [CVS] : -Root : /usr/local/cvsroot -Module : /WSS/platform/des1228p -TAG : DES1228P-REL1-0-5 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.00.05 ________________________________________________________________________________ New Feature: ------------- Bug Fixed: ------------- ___________________________issue________________________________#_of_issue______ 1. [POE issue] 3 2. [Hardware issue] 4 3. [Fiber issue] 8 4. [Snmp issue] 2 5. [IGMP issue] 4 6. [Forwarding issue] 5 7. [STP issue] 1 ******************************************************************************** Total: 27 Description: 1. [POE issue] . [TSDBUG #1] The PoE power cannot reach 185W, just about 183W. . [TSDBUG #3] The power will auto reduce to 0.xxW when these ports previous power is more than 15W. . [TSDBUG #56] The remainder power cannot update for real time. 2. [Hardware issue] . [TSDBUG #10] In half-duplex mode, port 1 transmit packets to port 2 ..., and last port transmit packets to port 1. After this action, some of port crash down (cannot transmit packets). . [TSDBUG #17] No function with FAN LED. . [TSDBUG #23] No function with hardware reset button for Rev.A2 (Factory Default). Hardware version A1 is OK. . [TSDBUG #46] FAN LED always display "Fail". 3. [Fiber issue] . [TSDBUG #18] Cannot link port 25 with fiber (MINI-GBIC). . [TSDBUG #22] Two switchs and connect with fiber cable each other for auto mode, if set one of switch to force, the link status still exist, it must re-plug in fiber cable or power restart, the link status just link down. . [TSDBUG #24] Two switches, switch_1 connect with switch_2 via 100M MINI-GBIC, there are some problems in it,please refer to detail description as below: 1.If set switch_1 to "Disable" for fiber port, then it cannot set configuration from "Disable" to "Auto" mode. 2.For Single Mode 100M MINI-GBIC => When set switch_1 to "Disable" mode, the switch_2 still link up and fiber port of switch_2 always receive "InErrors" packets in statistic page. . [TSDBUG #30] Switch_1 connect with Switch_2 via combo port with fiber cable, if set fiber port for force mode (1000M Full) then remove fiber cable, after this action and plug-in copper cable, this combo port for copper cannot link. . [TSDBUG #31] For port 25, if we use fiber and copper to lionk switch at the same time (Fiber will link up ==> Fiber link priority is more than Copper link priority ==> It's right) We tried to un-plug then plug-in for fiber cable for more cycles, after that, the port 25 for fiber cannot link up for the further, but port 25 for copper can link up. . [TSDBUG #45] When shake the fiber ports, it will cause the PoE always restart. . [TSDBUG #21] For fiber port, when we set fiber port form auto to 1000M Full (force mode), please remove the message about "The Auto-MDI-MDIX function is disabled". . [TSDBUG #24] Two switches, switch_1 connect with switch_2 via 100M MINI-GBIC, there are some problems in it,please refer to detail description as below: 1.If set switch_1 to "Disable" for fiber port, then it cannot set configuration from "Disable" to "Auto" mode. 2.For Single Mode 100M MINI-GBIC => When set switch_1 to "Disable" mode, the switch_2 still link up and fiber port of switch_2 always receive "InErrors" packets in statistic page. 4. [SNMP issue] . [TSDBUG #19] Cannot compiler DES-1228P MIN file with D-View. . [TSDBUG #26] This MIB can be compiler by MG-Soft, but after compiler it, we cannot find any private configuration in it. 5. [IGMP issue] . [TSDBUG #34] If port1and port3 are router port, port1 in static mode and port3 in dynamic mode. When join pakcets from port2, the IGMP table just show member for "02", it should be "01,02,03". . [TSDBUG #35] When memberships and router port have left from IGMP table, but the router port in dynamic mode still exist in GUI. . [TSDBUG #36] If join multicast group for 226.200.200.1, in IGMP table, the multicast group MAC address format is fault, it should be 01-00-5E-C8-C8-01, not 01-00-5E-48-C8-01. . [TSDBUG #48] If transmit "Query" packets into port2, sometime the "Dynamic Router Port" will create other ports as router ports in GUI. 6. [Forwarding issue] . [TSDBUG #37] Different aging time for opal and diamond. Opal: About 280sec Diamond: About 400sec . [TSDBUG #39] When transmit packets that it include tag and VID is 0, it will flooding to all ports, it is fault. . [TSDBUG #40] When transmit un-tagged packets from Diamond Ports (Port25~Port28) into switch and set Diamond Ports (Port25\`Port28) is tagged ports for egress rult, this un-tagged packets should be drop, not forward it. The Opal Ports don't have this issue. . [TSDBUG #51] Sometimes the aging for per port function fail. . [TSDBUG #55] FrameTooLong cannot be count when packets length is more than 2033 byte. 7. [STP issue] . [TSDBUG #44] There are 17 fail items for Spanning Tree test with ANVL. Changed: ------------- 1. PoE total power change to 170W. Note: ------------- 1. TSDBUG #9¡B#11¡B#12¡B#13¡B#14¡B#15¡B#16 all of this type of bug are packet lose, please reference DES-1252 standard test result which test by Poyi, if they also have those issue they must be chip limitation. 2. TSDBUG #27¡B#28¡B#29 : We don't fix in this version, because we think we don't need to add this attributes in our SNMP MIB (Those attributes more like control SmartConsole Utility not switch). Known issues: ------------- 1. [TSDBUG #25] If switch_1 connect with switch_2 via 100M multi-mode MINI GBIC (CT-0115NSP-MB2L), it must take long time about 1min10sec to link with them. 2. [TSDBUG #38] When test 802.1P QoS via different opal, the priority rate is incorrectly (Low : Middle : High : Highest ==> 1:2:4:4), it should be 1:2:4:8. 3. [TSDBUG #41] The switch configuration cannot be save when wait time is more than 5 sec. 4. [TSDBUG #42] The receive rate for receive side is not balance when transmit ports have same prioriry. 5. [TSDBUG #49] For Dynamic Forwarding Table function, it cannot find any MAC address for trunking group. 6. [TSDBUG #50] The two switches uplink with trunking port (port25~port28), if packets pass-through via port25 of trunking group, then unplug port26 of trunking group, it will cause the packets pass-through from original port25 become to port26 or port27of trunking group. 7. [TSDBUG #52] The two switches uplink with 100M Mini-GBIC (Single mode or Multi-mode) and set them for 100M Half-Duplix, we can find the one side cannot receive packets. 8. [TSDBUG #54] If target port in VLAN1and source port in VLAN2, when other ports in VLAN2 transmit broadcast packets, the target port in VLAN1 will receive these packets when source port in VLAN2 unlink. Not bug: ------------- 1. [TSDBUG #53] Cannot store the 512 MAC address in Dynamic Forwarding Table. It just 511 MAC address. 2. [TSDBUG #57] When output power is more than 170W then the switch will cut off power for lowest priority port ( i .e: port24), the power LED for port24 will turn to red. If unplug it then plug-in cable, the power LED for port24 still red, it should be dark. This is hardware limitation not bug, please see the attachmemt about 06-0002-081 TN-113 v4.0.pdf ________________________________________________________________________________RELEASE VERSION : 1.00.04 RELEASE VERSION : 1.00.04 RELEASE DATE : 2006/08/09 RELEASE BY : Huse Ho ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [CVS] : -Root : /usr/local/cvsroot -Module : /WSS/platform/des1228p -TAG : DES1228P-REL1-0-4 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.00.04 ________________________________________________________________________________ New Feature: ------------- Bug Fixed: ------------- ___________________________issue________________________________#_of_issue______ 1. [POE issue] 2 2. [Hardware issue] 4 3. [Fiber issue] 6 4. [Snmp issue] 2 5. [IGMP issue] 6 6. [Forwarding issue] 5 7. [STP issue] 1 ******************************************************************************** Total: 26 Description: 1. [POE issue] . [TSDBUG #1] The PoE power cannot reach 185W, just about 183W. . [TSDBUG #3] The power will auto reduce to 0.xxW when these ports previous power is more than 15W. 2. [Hardware issue] . [TSDBUG #10] In half-duplex mode, port 1 transmit packets to port 2 ..., and last port transmit packets to port 1. After this action, some of port crash down (cannot transmit packets). . [TSDBUG #17] No function with FAN LED. . [TSDBUG #23] No function with hardware reset button for Rev.A2 (Factory Default). Hardware version A1 is OK. . [TSDBUG #46] FAN LED always display "Fail". 3. [Fiber issue] . [TSDBUG #18] Cannot link port 25 with fiber (MINI-GBIC). . [TSDBUG #22] Two switchs and connect with fiber cable each other for auto mode, if set one of switch to force, the link status still exist, it must re-plug in fiber cable or power restart, the link status just link down. . [TSDBUG #24] Two switches, switch_1 connect with switch_2 via 100M MINI-GBIC, there are some problems in it,please refer to detail description as below: 1.If set switch_1 to "Disable" for fiber port, then it cannot set configuration from "Disable" to "Auto" mode. 2.For Single Mode 100M MINI-GBIC => When set switch_1 to "Disable" mode, the switch_2 still link up and fiber port of switch_2 always receive "InErrors" packets in statistic page. . [TSDBUG #30] Switch_1 connect with Switch_2 via combo port with fiber cable, if set fiber port for force mode (1000M Full) then remove fiber cable, after this action and plug-in copper cable, this combo port for copper cannot link. . [TSDBUG #31] For port 25, if we use fiber and copper to lionk switch at the same time (Fiber will link up ==> Fiber link priority is more than Copper link priority ==> It's right) We tried to un-plug then plug-in for fiber cable for more cycles, after that, the port 25 for fiber cannot link up for the further, but port 25 for copper can link up. . [TSDBUG #45] When shake the fiber ports, it will cause the PoE always restart. 4. [SNMP issue] . [TSDBUG #19] Cannot compiler DES-1228P MIN file with D-View. . [TSDBUG #26] This MIB can be compiler by MG-Soft, but after compiler it, we cannot find any private configuration in it. 5. [IGMP issue] . [TSDBUG #33] When membership join multicast group for 225.0.0.1~225.0.0.10, the IGMP table just only create one entry table (225.0.0.1), no 225.0.0.2~225.0.0.10. . [TSDBUG #34] If port1and port3 are router port, port1 in static mode and port3 in dynamic mode. When join pakcets from port2, the IGMP table just show member for "02", it should be "01,02,03". . [TSDBUG #35] When memberships and router port have left from IGMP table, but the router port in dynamic mode still exist in GUI. . [TSDBUG #36] If join multicast group for 226.200.200.1, in IGMP table, the multicast group MAC address format is fault, it should be 01-00-5E-C8-C8-01, not 01-00-5E-48-C8-01. . [TSDBUG #47] For join and leave configuration, the IGMP table cannot update latest configuration for real time. . [TSDBUG #48] If transmit "Query" packets into port2, sometime the "Dynamic Router Port" will create other ports as router ports in GUI. 6. [Forwarding issue] . [TSDBUG #37] Different aging time for opal and diamond. Opal: About 280sec Diamond: About 400sec . [TSDBUG #39] When transmit packets that it include tag and VID is 0, it will flooding to all ports, it is fault. . [TSDBUG #40] When transmit un-tagged packets from Diamond Ports (Port25~Port28) into switch and set Diamond Ports (Port25\`Port28) is tagged ports for egress rult, this un-tagged packets should be drop, not forward it. The Opal Ports don't have this issue. . [TSDBUG #51] Sometimes the aging for per port function fail. . [TSDBUG #55] FrameTooLong cannot be count when packets length is more than 2033 byte. 7. [STP issue] . [TSDBUG #44] There are 17 fail items for Spanning Tree test with ANVL. Changed: ------------- 1. PoE total power change to 170W. Note: ------------- 1. TSDBUG #9¡B#11¡B#12¡B#13¡B#14¡B#15¡B#16 all of this type of bug are packet lose, please reference DES-1252 standard test result which test by Poyi, if they also have those issue they must be chip limitation. 2. TSDBUG #27¡B#28¡B#29 : We don't fix in this version, because we think we don't need to add this attributes in our SNMP MIB (Those attributes more like control SmartConsole Utility not switch). Known issues: ------------- 1. [TSDBUG #25] If switch_1 connect with switch_2 via 100M multi-mode MINI GBIC (CT-0115NSP-MB2L), it must take long time about 1min10sec to link with them. 2. [TSDBUG #38] When test 802.1P QoS via different opal, the priority rate is incorrectly (Low : Middle : High : Highest ==> 1:2:4:4), it should be 1:2:4:8. 3. [TSDBUG #41] The switch configuration cannot be save when wait time is more than 5 sec. 4. [TSDBUG #42] The receive rate for receive side is not balance when transmit ports have same prioriry. 5. [TSDBUG #49] For Dynamic Forwarding Table function, it cannot find any MAC address for trunking group. 6. [TSDBUG #50] The two switches uplink with trunking port (port25~port28), if packets pass-through via port25 of trunking group, then unplug port26 of trunking group, it will cause the packets pass-through from original port25 become to port26 or port27of trunking group. 7. [TSDBUG #52] The two switches uplink with 100M Mini-GBIC (Single mode or Multi-mode) and set them for 100M Half-Duplix, we can find the one side cannot receive packets. 8. [TSDBUG #54] If target port in VLAN1and source port in VLAN2, when other ports in VLAN2 transmit broadcast packets, the target port in VLAN1 will receive these packets when source port in VLAN2 unlink. Not bug: ------------- 1. [TSDBUG #53] Cannot store the 512 MAC address in Dynamic Forwarding Table. It just 511 MAC address. ________________________________________________________________________________RELEASE VERSION : 1.00.03 RELEASE VERSION : 1.00.03 RELEASE DATE : 2006/08/03 RELEASE BY : Huse Ho ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [CVS] : -Root : /usr/local/cvsroot -Module : /WSS/platform/des1228p -TAG : DES1228P-REL1-0-3 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.00.03 ________________________________________________________________________________ New Feature: ------------- Bug Fixed: ------------- ___________________________issue________________________________#_of_issue______ 1. [POE issue] 2 2. [Hardware issue] 4 3. [Fiber issue] 6 4. [Snmp issue] 2 5. [IGMP issue] 6 6. [Forwarding issue] 1 7. [STP issue] 1 ******************************************************************************** Total: 22 Description: 1. [POE issue] . [TSDBUG #1] The PoE power cannot reach 185W, just about 183W. . [TSDBUG #3] The power will auto reduce to 0.xxW when these ports previous power is more than 15W. 2. [Hardware issue] . [TSDBUG #10] In half-duplex mode, port 1 transmit packets to port 2 ..., and last port transmit packets to port 1. After this action, some of port crash down (cannot transmit packets). . [TSDBUG #17] No function with FAN LED. . [TSDBUG #23] No function with hardware reset button for Rev.A2 (Factory Default). Hardware version A1 is OK. . [TSDBUG #46] FAN LED always display "Fail". 3. [Fiber issue] . [TSDBUG #18] Cannot link port 25 with fiber (MINI-GBIC). . [TSDBUG #22] Two switchs and connect with fiber cable each other for auto mode, if set one of switch to force, the link status still exist, it must re-plug in fiber cable or power restart, the link status just link down. . [TSDBUG #24] Two switches, switch_1 connect with switch_2 via 100M MINI-GBIC, there are some problems in it,please refer to detail description as below: 1.If set switch_1 to "Disable" for fiber port, then it cannot set configuration from "Disable" to "Auto" mode. 2.For Single Mode 100M MINI-GBIC => When set switch_1 to "Disable" mode, the switch_2 still link up and fiber port of switch_2 always receive "InErrors" packets in statistic page. . [TSDBUG #30] Switch_1 connect with Switch_2 via combo port with fiber cable, if set fiber port for force mode (1000M Full) then remove fiber cable, after this action and plug-in copper cable, this combo port for copper cannot link. . [TSDBUG #31] For port 25, if we use fiber and copper to lionk switch at the same time (Fiber will link up ==> Fiber link priority is more than Copper link priority ==> It's right) We tried to un-plug then plug-in for fiber cable for more cycles, after that, the port 25 for fiber cannot link up for the further, but port 25 for copper can link up. . [TSDBUG #45] When shake the fiber ports, it will cause the PoE always restart. 4. [SNMP issue] . [TSDBUG #19] Cannot compiler DES-1228P MIN file with D-View. . [TSDBUG #26] This MIB can be compiler by MG-Soft, but after compiler it, we cannot find any private configuration in it. 5. [IGMP issue] . [TSDBUG #33] When membership join multicast group for 225.0.0.1~225.0.0.10, the IGMP table just only create one entry table (225.0.0.1), no 225.0.0.2~225.0.0.10. . [TSDBUG #34] If port1and port3 are router port, port1 in static mode and port3 in dynamic mode. When join pakcets from port2, the IGMP table just show member for "02", it should be "01,02,03". . [TSDBUG #35] When memberships and router port have left from IGMP table, but the router port in dynamic mode still exist in GUI. . [TSDBUG #36] If join multicast group for 226.200.200.1, in IGMP table, the multicast group MAC address format is fault, it should be 01-00-5E-C8-C8-01, not 01-00-5E-48-C8-01. . [TSDBUG #47] For join and leave configuration, the IGMP table cannot update latest configuration for real time. . [TSDBUG #48] If transmit "Query" packets into port2, sometime the "Dynamic Router Port" will create other ports as router ports in GUI. 6. [Forwarding issue] . [TSDBUG #37] Different aging time for opal and diamond. Opal: About 280sec Diamond: About 400sec 7. [STP issue] . [TSDBUG #44] There are 17 fail items for Spanning Tree test with ANVL. Changed: ------------- 1. PoE total power change to 170W. Note: ------------- 1. TSDBUG #9¡B#11¡B#12¡B#13¡B#14¡B#15¡B#16 all of this type of bug are packet lose, please reference DES-1252 standard test result which test by Poyi, if they also have those issue they must be chip limitation. 2. TSDBUG #27¡B#28¡B#29 : We don't fix in this version, because we think we don't need to add this attributes in our SNMP MIB (Those attributes more like control SmartConsole Utility not switch). Known issues: ------------- 1. [TSDBUG #25] If switch_1 connect with switch_2 via 100M multi-mode MINI GBIC (CT-0115NSP-MB2L), it must take long time about 1min10sec to link with them. 2. [TSDBUG #38] When test 802.1P QoS via different opal, the priority rate is incorrectly (Low : Middle : High : Highest ==> 1:2:4:4), it should be 1:2:4:8. 3. [TSDBUG #41] The switch configuration cannot be save when wait time is more than 5 sec. 4. [TSDBUG #42] The receive rate for receive side is not balance when transmit ports have same prioriry. ________________________________________________________________________________RELEASE VERSION : 1.00.02 RELEASE VERSION : 1.00.02 RELEASE DATE : 2006/07/21 RELEASE BY : Huse Ho ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [CVS] : -Root : /usr/local/cvsroot -Module : /WSS/platform/des1228p -TAG : DES1228P-REL1-0-2 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.00.02 ________________________________________________________________________________ New Feature: ------------- Bug Fixed: ------------- ___________________________issue________________________________#_of_issue______ 1. [POE issue] 2 2. [Hardware issue] 3 2. [Fiber issue] 4 3. [Snmp issue] 2 ******************************************************************************** Total: 11 Description: 1. [POE issue] . [TSDBUG #1] The PoE power cannot reach 185W, just about 183W. . [TSDBUG #3] The power will auto reduce to 0.xxW when these ports previous power is more than 15W. 2. [Hardware issue] . [TSDBUG #10] In half-duplex mode, port 1 transmit packets to port 2 ..., and last port transmit packets to port 1. After this action, some of port crash down (cannot transmit packets). . [TSDBUG #17] No function with FAN LED. . [TSDBUG #23] No function with hardware reset button for Rev.A2 (Factory Default). Hardware version A1 is OK. 3. [Fiber issue] . [TSDBUG #18] Cannot link port 25 with fiber (MINI-GBIC). . [TSDBUG #22] Two switchs and connect with fiber cable each other for auto mode, if set one of switch to force, the link status still exist, it must re-plug in fiber cable or power restart, the link status just link down. . [TSDBUG #30] Switch_1 connect with Switch_2 via combo port with fiber cable, if set fiber port for force mode (1000M Full) then remove fiber cable, after this action and plug-in copper cable, this combo port for copper cannot link. . [TSDBUG #31] For port 25, if we use fiber and copper to lionk switch at the same time (Fiber will link up ==> Fiber link priority is more than Copper link priority ==> It's right) We tried to un-plug then plug-in for fiber cable for more cycles, after that, the port 25 for fiber cannot link up for the further, but port 25 for copper can link up. 4. [SNMP issue] . [TSDBUG #19] Cannot compiler DES-1228P MIN file with D-View. . [TSDBUG #26] This MIB can be compiler by MG-Soft, but after compiler it, we cannot find any private configuration in it. Changed: ------------- 1. PoE total power change to 170W. Note: ------------- 1. TSDBUG #9¡B#11¡B#12¡B#13¡B#14¡B#15¡B#16 all of this type of bug are packet lose, please reference DES-1252 standard test result which test by Poyi, if they also have those issue they must be chip limitation. 2. TSDBUG #27¡B#28¡B#29 : We don't fix in this version, because we think we don't need to add this attributes in our SNMP MIB (Those attributes more like control SmartConsole Utility not switch). Known issues: ------------- 1. [TSDBUG #25] If switch_1 connect with switch_2 via 100M multi-mode MINI GBIC (CT-0115NSP-MB2L), it must take long time about 1min10sec to link with them. ________________________________________________________________________________ RELEASE VERSION : 1.00.01 RELEASE DATE : 2006/06/22 RELEASE BY : Huse Ho ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [CVS] : -Root : /usr/local/cvsroot -Module : /WSS/platform/des1228p -TAG : DES1228P-REL1-0-1 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.00.01 ________________________________________________________________________________ New Feature: ------------- Bug Fixed: ------------- ___________________________issue________________________________#_of_issue______ 1. [POE issue] 2 2. [Trap issue] 1 3. [Snmp issue] 3 ******************************************************************************** Total: 6 Description: 1. [POE issue] . [TSDBUG #1] The PoE power cannot reach 185W, just about 183W. . [TSDBUG #2] Cannot set power threshold valus less than 100W 2. [Trap issue] . [TSDBUG #4] The smartconsole utility still receive PoE evens trap from DUT when trap function disable by GUI. 3. [Port Setting issue] . [TSDBUG #6] Cannot find out the "Power Limit" function in SNMP. . [TSDBUG #7] Before enable SNMP trap, please don¡¦t allow user to enable the value. . [TSDBUG #8] The D-View return error message when compile power-ehternet MIB. Changed: ------------- 1. PoE total power change to 180W. Note: N/A ________________________________________________________________________________ RELEASE VERSION : 1.00.00 RELEASE DATE : 2006/05/16 RELEASE BY : Huse Ho ________________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [CVS] : -Root : /usr/local/cvsroot -Module : /WSS/platform/des1228p -TAG : DES1228P-REL1-0-0 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v1.00.00 ________________________________________________________________________________ New Feature: ------------- IGMP snooping 802.1D spanning tree Port Trunk 802.3x Flow Control Back Pressure Flow Control Port mirroring 802.1Q Tag-based VLAN 802.1p QoS 802.1X Port-based Access Control Broadcast Storm Control Safeguard Engine Static Mac Web-based GUI SNMP v1 DHCP client Trap setting Password Control Access Switch Discovery/Management Utility Port Setting Frimware upgrade RFC 1213 MIB2 Private MIB PoE (Power Over Ethernet) Bug Fixed: ------------- Changed: ------------- N/A Known issues: ------------- 1. Diamond can not aging the forward mac table exactly. When we set the aging time to 300 seconds, it will aging the expire mac about 600 seconds or above. 2. In 10/100 Half mode, if we use ring method (1->2, 2->3, 3->4, 4->5, 5->6, 6->7, 7->1), or we sned from multi port to one port, we will lost packet. 3. Diamond can not communicate with Opal by pause packet, if conjection happened, Opal port will not slow down it's speed, because Opal can not receive the pause packet. Note: N/A