DES-3010F/3010FL/3010G/3018/3026 & DHS-3010F/3010G/3018/3026
Firmware Release Note  

Firmware: 3.00.053 (PROM?1.01.007)
Hardware: A1/A2/A3G for DES-3000 series, D1/D2/D3G for DHS-3000 series 
Date: March. 30 2007

Modification:
1. Expanding port description from 32 bytes to 128 bytes.
2. Add management IP interface description (128 bytes).
3. Revise maximum trunk group member ports from 8 to 4 
4. Remove Web-UI first product introductory page for security concern.

Problems Resolved:
1. Can’t display H/W version correctly in DES-3000 (A3) and DHS-3000 (D3).
2. Switch sends cold-start trap while executing warm-start
3. TFTP upload configuration fail after switch operates a period of time, because of "allocate memory failure"
4. Slow display via CLI and Telnet when executing "show fdb" command if clipaging function is disabled.
5. SNMPv1, v2 community group are auto created while adding SNMPv3 community group.
6. Can’t enable SMTP via Web-UI.
7. For DES/DHS-3010G, if port 9 is disabled, the port 10 is also disabled.
8. Input “Port description” will cause the port can not forward traffic after switch restart.
9. While monitor MAC address table, the VLAN name column can’t enter more than 10 characters.
10. The CPU Interface Filtering feature on Web-UI for port list setting can not match with CLI.

Firmware: 3.00.036 (PROM?1.01.006)
Hardware: A1/A2 for DES-3000 series, D1/D2 for DHS-3000 series 
Date: Sep. 27, 2006

Problems Resolved:
1. Fix dst (day light saving time) command not meet the CLI definition.
2. DES-3018 FW upgrade from 2.00B20 to 3.00B32 will lost configuration.

Firmware: 3.00.032 (PROM?1.01.006)
Hardware: A1/A2 for DES-3000 series, D1/D2 for DHS-3000 series 
Date: July. 10, 2006

Problems Resolved:
1.DES-3018 .BIN file write to DES-3010F, port link fail
2. PROM code upgrade to v1.01.006 for new BCM532x series P12 IC introduce, its hardware version is A2/D2.
3. PI-309 DES-3000 series IP-MAC issue.


Firmware: 3.00.025 (PROM?1.01.005)
Hardware: A1 for DES-3000 series, D1 for DHS-3000 series 
Date: Jun. 5, 2006

Add new features:
1.MAC notification
2.Cos based on MAC DA/TOS/DSCP
3.IP/MAC Binding
4.BPDU filtering per port
5.Multicast filtering mode
6. Add save log command.
7. Support new module: DEM-201FL
8. Support chip BCM532x series P12 IC

Problems Resolved:
1. Fix: Incorrect SNMP value in Bridge MIB -dot1d STP Port Designated Bridge/Root
2. Fix: STP LBD function but CPU 100% periodically.
3. Fix: factory test issue: DES-3010FL MAC address error.
4. Fix: The source port of DES-3010F SNMP trap was = "0"
5. Fix IGMP Snooping issue - Stop a stream may also stop another stream play in the same port/PC.

Firmware: 2.00.026 (PROM?1.01.005)
Hardware: A1 for DES-3000 series, D1 for DHS-3000 series 
Date: Feb. 27, 2006

Fixed LED issue when reboot
Led bright one times when DUT enter CLI (As R1).

Firmware: 2.00.023 (PROM?1.01.005)
Hardware: A1 for DES-3000 series, D1 for DHS-3000 series 
Date: Feb. 21, 2006

Add support new flash:
S29GL032M90TFIR40
W19B320ABT7H
AT49BV322D-70TU


Firmware: 2.00.020 (PROM?1.01.003)
Hardware: A1 for DES-3000 series, D1 for DHS-3000 series 
Date: Dec. 26, 2005

Problems Resolved:
1. Fix D-Link Russia reported security issue. Correction actions:
   * Remove super password
   * Change backdoor password to console access only.

2. Fix “trusted_host” IP works in telnet/web, but fails in SNMP problem.
3. Fix WinXP 802.1x client showing wrong message when running “local 802.1x”  
4. Fix message error (IP=0.0.0.0) when sending “linkup/down” trap.
5. Fix static FDB table problem when co-working with port-security function. 
6. Fix failed to configure “Unicast/Multicast static filtering table” from D-View SNMP tool.
7. Fix Web UI Java script security issue: If using user-level account login from Web UI (eg., Firefox) and then disable Java script of web, that user-level account can have admin-level access right.
8. Fix incorrectly sending “port security access violation trap” issue.

Enhancements:

1. DHCP Auto-configuration
2. Web UI supports non-IE browser
3. STP loopback prevention
4. Bandwidth control GUI/CLI message remind
5. SMTP client Log enhancement
6. Log admin password/IP change activity enhancement
7. SIM commander
8. CPU interface filtering
9. Port Security Violation Trap/Log

Notes:
1. For firmware upgrade from R1 to R2, please disable 802.1x state first. Then re-configure the 802.1x function in R2 firmware version.
2. After upgrade firmware from R1 to R2, user need re-configure the SIM and syslog function. Because these functions be upgraded.


DES-30xx Firmware 1.01.021 (Released: June 15, 2005)

First release version. For features, please check the Data Sheet.