DWL-1000AP+ Release Note

Version 1.20 Jan/14/2004
1.rename from 1.19b4

Version 1.19b4 Jan/7/2004
1.change Israel channel range( 4~8  -->  5~13 )
2.change wlan driver(acx_4x 4.55)
3.#define BIGBUFSIZE   3000(2000->3000)

Version 1.19b3 Jan/5/2004
1.fixed filter message bug

Version 1.19b2 Dec/15/2003
1.add wpa & wpa-psk

Version 1.19b1 Dec/9/2003
1.add three snmp mib nodes to DLK_Mib tree.
  a.get/set ip/mask address.
  b.get/set maximum client number.
  c.get on_line client traffic statistics and on_line client number. 
2.Add warning message in advanced->filter page if when user doesn't write mac address in allow mode,device will pop a warning message "Mac filter's Mac is empty.Please fill in.".

Version 1.18b3 Sep/17/2003
1. AP client mode is unstable.
2. when connect with Centrino, it will disconnect suddenly...pls see the attached files.
3. acx driver ver is 4.48

Version 1.18 Aug/22/2003
1. acx_4x driver version is 4.34

Version 1.18 Jun/24/2003
1. acx_4x driver version is 4.28

Version 1.17b1 Jun/24/2003
1.fix bug of "whenever enable the Network integrity, the 802.1X function enables itself.  when you disable the 802.1X, the network integrity disables itself too"
2. acx_4x driver version is 4.24 can be compatible with Centrino

Version 1.17b1 Jun/24/2003
1. fix bug for "使用 Bridge mode 連接兩台1000AP+,經過一分鐘後,造成兩台AP死機"
2. acx_4x driver version is 4.24

Version 1.17d Jun/10/2003
1. fix bug for "network integrity"

Version 1.17c Jun/06/2003
1. add "network integrity" in web
2. "network integrity" is valid only when AP, Backup and Group AP mode

Version 1.17a May/19/2003
1. update acx_4x driver to 4.21(fix bug of 802.1x)

Version 1.17 May/09/2003
1. accounting (add log off when use 802.1x function)
2. Mac list
3. 4X function
4. autofall back
5. Add singal strength and Link quality under bridge mode
6. version of acx_4x is 4.20

Version 1.15 Mar/10/2003
1.this firmware fix bug for DHCP,  version is same but different from date

Version 1.15 Feb/26/2003
1. update value of in RFC1213's sysService to 3
2.modify the major bug for not stable situation

Version 1.14 Feb/13/2003
1. update the following to read obly:
	dot11StationID, dot11DesiredBSSType, dot11WEPKeyMappingLength,
	dot11ExcludeUnencrypted, dot11ChannelAgilityEnabled, dot11CurrentTxAntenna
	dot11CurrentRxAntenna, dot11CurrentTxPowerLevel, dot11CurrentCCAMode
2. update oid of system id and trap id for dlink

Version 1.13 Jan/29/2003
1. support DNS Server (from h_lan.html to h_dhcp.html)
2. update ACX driver to ver3.42

Version 1.12 Jan/27/2003
1. support DNS Server
2. update ACX driver to ver3.41

Version 1.11 Jan/16/2003
1. can set read and write community
2. can send trap(coldSatrt, authenticationFail) of SNMP 
3. fix bug of mib compile for D-view and rename mib file from "DLK_mib.txt" to Dlink.mib"
4. fix bug of mask set when lan ip is set of Class A
5. update ACX driver to ver3.35

Version 1.10 Dec/19/2002
1. update help web page described as help_adv.html

Version 1.0c Dec/16/2002
1. update ACX driver to 3.31 for  " Fix the backup AP ip"

Version 1.0b Dec/13/2002
1. update ACX driver to ver3.30 for fixed the bug of Backup Mode AP

Version 1.0a Dec/13/2002
1. update web page:
    update header logo "Air Plus" to "Air Premier"
2. update web page:
    when AP is "Wireless Client", add "signal strength " in sitesurvey page for cannected Remote AP

Version 1.00 Dec/03/2002
1. update ACX driver version to ver3.26
2. modify adv_mode web page
3. modify adv_perform web pae, add  Antenna Selection item
4. fixed bug as followings
    ●NO.316__ Home/DHCP cancel of bug
5. fixed the bug of "diagnostic" LED is always ON
6. fixed the bug of "256-bit Encryption wp key NOT working"
7. update help web page of adv perform (add Antenna Selection )
   

Version 0.1s Nov/27/2002
1. support utility using in WinXP
2. update Web Page:
    update help web pages described as help_adv.html, help_faq.html,
    help_home.html, help_status.html, help_tools.html
3. update Web Page:
    update adv_mode web page described as wtf2 copy.jpg 

Version 0.1r Nov/22/2002
1. modify SNMP descibed as "DWL-1000AP+ vs D-View.eml"
2. fix bug as following
    ●NO.296__ 字的顏色的不同。

Version 0.1q Nov/21/2002
1. updete Web Page described as dwl1000AP+_feedback_112002.doc
2. encryption function for utility 
3. fixed bugs as follows
   ●NO.293__ firmware of bug
   ●NO.292__ load balancing mode can't setting AP mode/load 
      balancing of bug
   ●NO.277__ wep key儲存的issue
   ●NO.271__ Home\LAN\cancel button of bug
   ●NO.269__ status\device info\wireless\ap mode web of bug

Version 0.1p Nov/20/2002
1.Change "AP mode" to "Wireless Mode" with option selection  
  for Access Point, Wireless Client, Wireless Bridge, 
  Multi-   point Bridge, and Repeater.
2. updete Web Page:
   update "Port Isolation" to "Client security" in Advanaced
   -> Performance 
3. update Web Page:
   update "power output ctrl(7 10 13 default)"  to "Antenna
   transmit power(3~17)" in Advanaced-> Performance
4. update Web Page:
   update "remoter server IP" to "keep-alive connection" in Advanaced
   ->Mode->Backup AP
5. update Web Page:
   add "256 bits" select item in Advanced->802.1x->Encryption Key
6. add encryption function for utility
7. Please test the folowing description is true or not:
   during range testing, after getting out of range and 
   getting back into range, AP fails to re-establish 
   connection with the notebook.  
8. fixed bugs as follows
    ●NO.277__ wep key儲存的issue
    ●NO.269__ status\device info\wireless\ap mode web of bug

Version 0.1o Nov/07/2002
1. update ACX driver version to 3.24
2. bug fixed as follows
    ●NO.173__ backup function of bug
    ●NO.173__ IP setting的issue
    ●NO.198__ AP client of bug
    ●NO.228__ 在web/Advanced/Performance/Transmission Rates, Preamble type,SSID Broadcast,Port Issolation 中，若以連續兩次錯誤的方式輸入的bug
    ●NO.251__ backup mode of bug,
    ●NO.257__ short preamble wireless to wireless performance of bug
    ●NO.259__ backup mode Remote server ip check of bug
    
Version 0.1n Oct/28/2002    
1. update ACX driver version to 3.23

Version 0.1m Oct/24/2002
1. update ACX driver version to 3.21

Version 0.1k Oct/15/2002
1. update ACX driver version to 3.19

Version 0.1i Oct/03/2002
1. ACX3.16
2. portisolation
3. power output control

Version 0.1h Sep/25/2002
1. in Advanved item, press Apply button will carsh 
2. dynamic channel can not cancel
3. dynamic channel, group ap, backup ap, repeater, 802.1x, snmp

Version 1.00.0b May/06/2002
1. fix bug in MAC Filter, the meaning of "only allow" and "only deny" is corrected
2. log display 10 rows per page, the new log display first
3. update expired time of DHCP Client Table to current time
4. fix bug of wep key settings

Version 1.00.0c May/09/2002
1. fix Wizard, at Set the ESSID and Channel, when press next and back, channel will become to default value
2. fix Wizard, at Set Encryption, Wep Encryption and Key1 were not apply to cfg, and it will check the key1's length
3. fix Advnaced, mode, remote AP MAC is allow 000000000000 and will show on browser but remote Bridge MAC is not allow zero.
4. fix Advanced, Performance, then range check of beacon interval, ... etc.
5. fix h_wireless.html reload problem
6. fix bug in wizard_11.html that browser will show "file not found" after click "exit"

Version 1.00.0d May/10/2002
1. correct some misspelled string on web pages
2. remove Antenna Type
3. remove SSID brodcast
4. add help message for wireless part
5. now deny user set to DHCP client while DHCP server enabled
6. now deny user enable DHCP server while set to DHCP client

Version 1.00.0e May/13/2002(do not release now)
1. all help button will open another browser
2. "ESSID" all rename to "SSID", and length = 32 not 31
3. fixed bug, log's page control
4. fixed bug, backup mode default ip is 192.168.0.50 not 192.168.1.1
5. change wireless code(acx) to the lastest code
6. change home->dhcp, Advanced->filter, Status->log, Status->Wireless
	make sure the screen is long enough to contain the list message.
	
Version 1.00.0e May/14/2002(the same version, but fixed 2 words)
1. fixed words, wizard's last page, "completed"
2. fixed words, at Home->wizard, "DWL-900AP+"

Version 1.00.0f May/14/2002(have mail to DLink)
Version 1.00.0g May/14/2002(include fixed in 1.00.0f)
1. fixed when set wep key will reboot.(modify by john)
2. fixed Advanced->Mode, remove onchange proporty at Remote AP MAC
	and Remote Bridge MAC
3. open watchdog
4. fixed wrong words, at wizard first page, "DWL-900AP+", at wizard
	forth page, "Enabled" "Disabled"
5. at wizard Step3, change Setkey Hex, not ASCII
6. Home->Wireless, fixed change wep encryption and change key type problem

Version 1.00.0h May/15/2002
1. all "Enable", "Disable" change to "Enabled", "Disabled"
2. add CHKLST.TXT for production(http://ip/chklst.txt can get it)
3. fixed mac filter

Version 1.00.0i May/16/2002
1. fixed wrong words, at wizard->step2, Access "Point"
2. fixed wrong wrods, at Advanced->Filter, remove line "Use MAC Filter to.... "
	Only allow "address(es)" ...., Only deny "address(es)"
3. fixed wrong words, Status->DeviceInfo, at Wireless, Encryption funtion, "Disabled"
4. fixed wrong words, Mode->help, remove repeat words
5. add FAQ Help
6. change wireless driver, fixed wireless connect to wireless problem

Version 1.0 May/17/2002
1. change version no

Version 1.0 May/20/2002
1. fixed charset from big5 to iso-8859-1 at the following files:
	help_tools.html, help_status.html, help_home.html, help_adv.html
2. have NO CHANGE version number!!!

Version 1.0 May/25/2002
1. set antenna default to left antenna
2. fixed mac filter, when mac addresses have be restricted, the device can not access internet.
3. Firmware Date is May/25/2002

Version 1.1 May/30/2002
1. change web page, adv->performance, home->wireless
2. fixed DHCP compitable. Some DHCP Server need host name at DHCP Request packet, add this option.

Version 1.1 May/31/2002
1. change antenna to diversity

Version 1.1a Jun/4/2002
1. supported utility
2. acx version:3.04

Version 1.1b
1. When heavy traffic, watchdog will reboot AP

Version 1.1c
1. add power saving
2. supported utility with firmware version(the utility version is 1.1d)

Version 1.1d
1. add power saving option at weca.htm
2. when wireless down, system will re-init wireless or re-boot

Version 1.1e
1. log add currentpage/totalpage
2. power saving default is enable

Version 1.1f
1. dhcp server will not assign self's ip to client

Version 2.0
1. the same as 1.1f

Version 2.0 28/Jun/2002
1. fixed if without wireless card, ap will reboot again and again
2. weca.htm, test item show data error

Version 2.1 03/July/2002
1. remove passphrase
2. change DWL-900AP+'s ico