DWL-6700 Firmware Release Note Project Name: DWL-6700 HW Version: A2 (from v4401_B007) Region /OEM code: NA WLAN Domain: 0x3A /FCCA Channel List: 2.4GHz : 1,2,3,4,5,6,7,8,9,10,11 5GHz : 36, 40, 44, 48, 149, 153, 157, 161, 165 Flash size: 16 MB DRAM size: 128 MB ========================================================================= Release notes history ------------------------------------------------------------------------- Firmware Version: ver4.4.0.8_B015 Firmware Date: Tue, 31, May, 2016 KERNEL: 2.6.31-mips Wireless Domain: 0x3A, 0x14, 0x23, 0x3B, 0x3C, 0x50, 0x51, 0x37, 0x5E, 0x52, 0x41 checksum: MD5sum:d5bfceeb79a309f88cf481747ac5afd5 GIT: 0daafa828d3ebbdb1496fdc8a3d639e55eec43e8 Problems Resolved & Enhancements: 1. Fix bug: hide SSID not works for multiple SSIDs ------------------------------------------------------------------------- Firmware Version: ver4.4.0.8_B014 Firmware Date: Fri, 27, May, 2016 KERNEL: 2.6.31-mips Wireless Domain: 0x3A, 0x14, 0x23, 0x3B, 0x3C, 0x50, 0x51, 0x37, 0x5E, 0x52, 0x41 checksum: MD5sum:44a0a3e3cfaa0946db6c407b3f1860d2 GIT: ad58e70b8c9761dbca8be4a280220fe646e5a42e Problems Resolved & Enhancements: 1. [Management Mode] Add wifi module stop-start when available memory not enough. ------------------------------------------------------------------------- Firmware Version: ver4.4.0.8_B013 Firmware Date: Mon, 23, May, 2016 KERNEL: 2.6.31-mips Wireless Domain: 0x3A, 0x14, 0x23, 0x3B, 0x3C, 0x50, 0x51, 0x37, 0x5E, 0x52, 0x41 checksum: MD5sum:5ff67e31f6530f16c495e563e17780a3 GIT: 5bd97fa5ab23f1162989e9e6aa43db5048e67b13 Problems Resolved & Enhancements: 1. [Standalone Mode] Fix issue station isolation is not been gray out when 2.4G or 5G radio interface are disabled. 2. [Management Mode] failed to use managed mode to hide SSID. ------------------------------------------------------------------------- Firmware Version: ver4.4.0.8_B011_Beta Firmware Date: Tue, 26, April, 2016 KERNEL: 2.6.31-mips Wireless Domain: 0x99 (Test FW, only support band 1) checksum: MD5sum:6261faef0efb88f5b6f0b781cb30e997 GIT: af91ebbd45ea602352fb291622fce2d86380d72b Problems Resolved & Enhancements: 1. [Standalone Mode] Bug #20831 DWL-6700 provide band 1 wifi channel to D-Link. ------------------------------------------------------------------------- Firmware Version: ver4.4.0.8_B011 Firmware Date: Fir, 14, April, 2016 KERNEL: 2.6.31-mips Wireless Domain: 0x3A, 0x14, 0x23, 0x3B, 0x3C, 0x50, 0x51, 0x37, 0x5E, 0x52, 0x41 checksum: MD5sum: ea75b7a5d5404ee9c1c7b1a6e70e0017 GIT: d3028a05b9160f2cb5b458c27bf10982247fad34 Problems Resolved & Enhancements: 1. [Management Mode] Fix schedule status can't show on DWC-1000 web page. 2. [Management Mode] Fix management schedule only support first 5G and 2.4G VAP. ------------------------------------------------------------------------- Firmware Version: ver4.4.0.8_B010 Firmware Date: Fir, 08, April, 2016 KERNEL: 2.6.31-mips Wireless Domain: 0x3A, 0x14, 0x23, 0x3B, 0x3C, 0x50, 0x51, 0x37, 0x5E, 0x52, 0x41 checksum: MD5sum: 095e82b71b07df6e142aa3572498ead6 GIT: 09c07cf0744dacc8877616dbb10c4bb9bf131048 Problems Resolved & Enhancements: 1. [Management Mode] Support scheduler feature in mamagement mode. ------------------------------------------------------------------------- Firmware Version: ver4.4.0.8_B009 Firmware Date: Wed, 09, Mar, 2016 KERNEL: 2.6.31-mips Wireless Domain: 0x3A, 0x14, 0x23, 0x3B, 0x3C, 0x50, 0x51, 0x37, 0x5E, 0x52, 0x41 checksum: MD5sum: c46563075560d840f0795dfaf1f4ee67 GIT: ab789d0294cc480177cb87ed59438c95abd31a02 Problems Resolved & Enhancements: 1. Bug #20590: [Management Mode] Set Bandwidth 40MHz, and AP actually is working with 20MHz ------------------------------------------------------------------------- Firmware Version: ver4.4.0.8_B008 Firmware Date: Fri, 22, Jan, 2016 KERNEL: 2.6.31-mips Wireless Domain: 0x3A, 0x14, 0x23, 0x3B, 0x3C, 0x50, 0x51, 0x37, 0x5E, 0x52, 0x41 checksum: MD5sum: 6729c3340b92d10a83a60993c189c565 GIT: af80193c09847196177ddd8d37884998cffcd9d7 Problems Resolved & Enhancements: 1. Bug #20298: GUI login Password to support ASCII values range 32 to 126, and 32 characters password length ------------------------------------------------------------------------- Firmware Version: ver4.4.0.8_B007 Firmware Date: Wed, 23, Dec, 2015 KERNEL: 2.6.31-mips Wireless Domain: 0x3A, 0x14, 0x23, 0x3B, 0x3C, 0x50, 0x51, 0x37, 0x5E, 0x52, 0x41 checksum: MD5sum: a4422e6af6bab95dc6669ead1fd472cb GIT: 7aa044e1ae8737b7b1f3e2e40e16865a4926b033 Problems Resolved & Enhancements: 1. Bug #20146: Client Associations and Radio Statistics information are incorrect in standalone mode 2. Bug #19954: At management mode, in many countries, fail to manual to change channel 3. Bug #19955: Channel can't be selected at management mode ------------------------------------------------------------------------- Firmware Version: ver4.4.0.8_B006 Firmware Date: Thur, 26, Nov, 2015 KERNEL: 2.6.31-mips Wireless Domain: 0x3A, 0x14, 0x23, 0x3B, 0x3C, 0x50, 0x51, 0x37, 0x5E, 0x52, 0x41 checksum: MD5sum: 38183e2bd25d501011b0ae4e98926f40 GIT: 486961f727b74f8baad11c362f5b79340253c1d9 Problems Resolved & Enhancements: 1. Bug #19822: When both of the 2.4G and 5G are on, the 2.4G & 5G status at Status->Wireless Information->Access Point->Managed->Radio are down ------------------------------------------------------------------------- Firmware Version: ver4.4.0.8_B005 Firmware Date: Thur, 29, Oct, 2015 KERNEL: 2.6.31-mips Wireless Domain: 0x3A, 0x14, 0x23, 0x3B, 0x3C, 0x50, 0x51, 0x37, 0x5E, 0x52, 0x41 checksum: MD5sum: 180aaf1672b9b2dd54e6e382dc92057a GIT: 7bc4834da9157b331db9e17d759bd3042b49d894 Problems Resolved & Enhancements: 1. Bug #19929: Set to factory defaut during run time by power cycle test ------------------------------------------------------------------------- Firmware Version: ver4.4.0.8_B004 Firmware Date: Thur, 22, Oct, 2015 KERNEL: 2.6.31-mips Wireless Domain: 0x3A, 0x14, 0x23, 0x3B, 0x3C, 0x50, 0x51, 0x37, 0x5E, 0x52, 0x41 checksum: MD5sum: f8f4480f5397382266bfa3fd1681896f GIT: 3574fcf334c6b0252a8a2c68107213e493f5d9c6 Problems Resolved & Enhancements: 1. Bug #19821: By applying customer's configuration, the 2.4G & 5G can't send broadcast packets but LEDs are correct. When 5G is turned off, 2.4G can work well. 2. Bug #19822: When both of the 2.4G and 5G are on, the 2.4G & 5G status at Status->Wireless Information->Access Point->Managed->Radio are down ------------------------------------------------------------------------- Firmware Version: ver4.4.0.8_B003 Firmware Date: Thur, 10, Sep, 2015 KERNEL: 2.6.31-mips Wireless Domain: 0x3A, 0x14, 0x23, 0x3B, 0x3C, 0x50, 0x51, 0x37, 0x5E, 0x52, 0x41 checksum: MD5sum: 37079ce4017c0d73bd4d72f5868a33e9 GIT: a5a7ad6a947dd7380ea7f83e9cdc2a3a3ed38175 Problems Resolved & Enhancements: 1. Bug #17785: LED - W-iFi LED doesn't turn off after Radio is down (TSD#0038014) 2. Bug #18899: Wifi WMM Power-save issue 3. Bug #19333: Max station count 4. Bug #19360: LED doesn't display correctly when the radio is off 5. Bug #19546: Station list are not synced with AC, hostapd and wifi driver 6. Feature #19615: Memory monitor implemenation: work around for the out of memory issue ------------------------------------------------------------------------- Firmware Version: ver4.4.0.8_B001 Firmware Date: Mon, 10, Aug, 2015 KERNEL: 2.6.31-mips Wireless Domain: 0x3A, 0x14, 0x23, 0x3B, 0x3C, 0x50, 0x51, 0x37, 0x5E, 0x52, 0x41 checksum: MD5sum: 2b71aeb1eee8198315fdbf473aaa3585 GIT: f373b6dff92a6ae2c1601f3bd6a4a002b333dcbb Problems Resolved & Enhancements: 1. Bug #19349: Radio off not work at Management mode 2. Bug #18606: WPA&WPA2 GUI restriction issue (Wifi logo certificate issue#1) 3. Bug #18607: 4.2.10 Broadcom STA can not ping to AP side when power save is enabled (Wifi logo certificate issue#2) 4. Bug #18608: APUT does not send the correct packets for (VO, VI and BK) in WMM tests (Wifi logo certificate issue#3) 5. Bug #18609: It seems that cannot fix the channel correctly. (Wifi logo certificate issue#4) 6. Bug #19130: KR domain (0x5E) - Web UI shows channel 165 (TSD: 0041654) 7. Bug #19173: MAC's last byte display 3 digits - Final firmware ------------------------------------------------------------------------- Firmware Version: ver4.4.0.7 Firmware Date: Wed, 15, July, 2015 KERNEL: 2.6.31-mips Wireless Domain: 0x3A, 0x14, 0x23, 0x3B, 0x3C, 0x50, 0x51, 0x37, 0x5E, 0x52, 0x41 checksum: 0x48520E41 MD5sum: 386bb3a8f012e9cde9276b8c4c1d1619 GIT: f8859b904525b43b10534e89d61f28317fd18324 Problems Resolved & Enhancements: 1. Bug #18863: hidden page, chklst.txt, did not show correct channel at 2.4G radio (channel 12 & 13 are disappear.) 2. Bug #19030: Domain code and channel verification - final code NOTE: From this version, the “Wireless Domain” field above displays all the supported domain. ------------------------------------------------------------------------- Firmware Version: ver4.4.0.6 Firmware Date: Mon, 18, May, 2015 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: 0x7C60BD99 MD5sum: 43d0158d8ab6e3edfa2a6a1eeefd2c28 GIT: fcd7c5dc199d36e98bc9213dcde3a4cbeba863a2 Problems Resolved & Enhancements: Bug #18495: MP reset to factory default return value invalid ------------------------------------------------------------------------- Firmware Version: ver4.4.0.5 Firmware Date: Thr, 7, May, 2015 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: MD5sum:f7eb17e85e5d99c21985b76a353f2397 GIT: fc3dba245b0fd950a5cfcfbf9ab7bff707da6a89 Problems Resolved & Enhancements: Bug #18398: HTTPS - Web UI crash when HTTPS enabled (TSD#0039050) Bug #18399: VAP - Change VLAN ID of VAP would shut down Wi-Fi interface (TSD#0039049) Bug #18407: Shut down wireless module when wireless client is DWA-160 B1 (TSD#0039115) Bug #18408: Scheduler Association - Incorrect Radio (TSD#0039120) Bug #18415: VAP - MAC Auth - RADIUS fail (TSD#0039121) ------------------------------------------------------------------------- Firmware Version: ver4.4.0.3 Firmware Date: Fri, 24, April, 2015 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: MD5sum: d57bf32dae394b9ad251baea4b7679c2 GIT: b6dd9c48a6097405381239a8bb69f755956ee869 Problems Resolved & Enhancements: Bug #18150: Android or Tablet can't show captive portal web page. ------------------------------------------------------------------------- Firmware Version: ver4.4.0.2 Firmware Date: Tue, 7, April, 2015 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: MD5sum: 27b2d73ff7b5ca15129d1c9331b579f5 GIT: 69aac7de4c88b95e51a13ff9eabf63d9e35a1e38 Problems Resolved & Enhancements: Bug #13732: select active radius server 2~3 (enable global radius),then wireless client can't link success with DUT Bug #13733: seclect any radius server (disable global radius),then wireless client can't link success with DUT Bug #14750: VAP(SSID) - Security - WPA Enterprise - RADIUS Server(TSD#0033507) Bug #14751: VAP(SSID) - Security - WPA Enterprise - RADIUS IP Address-3 (TSD#0033508) Bug #16971: Kernel panic (wifi driver) Bug #17312: Captive portal feature - Whenever a wifi client change to another SSID at the same 6700AP, the log-in page not show up but just let user access internet directly. Bug #17711: VLAN value not work at standalone mode when 6700 reboot(TSD#0033518) Bug #17718: Ethernet Settings - Fail to change Management VLAN ID and Untagged VLAN ID (TSD#0037953) Bug #17723: A wifi client may not show the captive portal log-in page when co-work with DWC-1000 4402_WW firmware. (at captive portal authentication configuration) Bug #17727: Status - Interfaces - VLAN ID information is Untagged VLAN ID's setting (TSD#0037955) Bug #17782: Wireless Settings - Legacy Rate Sets - Fail to change Supported Rate and Basic Rate (TSD#0037975) Bug #17786: VAP(SSID) - RADIUS Server - RADIUS accounting fails (TSD#0038039) Bug #17789: WDS - Function fail (TSD#0038059) Bug #17791: Email Alerts - Function fail (TSD#0038060) Feature #17655: X-table and on/off switch won't be reset to default when "rese to default feature" is triggered Develop #16142: OpenSSL migrate to 0.9.8zc --> 0.9.8ze ------------------------------------------------------------------------- Firmware Version: ver4.4.0.1_B007 Firmware Date: Thr, 29, Jan, 2015 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: 0x290FDD3E MD5sum: 142e74f6573015769c8bd609dffd6d83 GIT: c1339523f0699be1b40f4878b1da9a97d7a8b37e Problems Resolved & Enhancements: 1. Bug #16164: VAP(SSID) - HTTP Redirect - Function fail (TSD#0034739) 2. Bug #17159: WiFi Interface Number, Wifi MAC rule not follow 6600 (2.4G and 5G should switch) - TSD#0036857 (DBG14120578) 3. Bug #17210: log message issue － TSD#0037258 (DBG14120576) 4. Bug #17236: Wireless Settings - Multicast Forwarding Fail -TSD#0036859 (DBG0036859) 5. Bug #17396: Basic Settings - Password will change to empty after change System Settings - TSD#0037255 (DBG14120581) 6. Bug #17397: Wireless Settings - Transmit Power Fail - TSD#0036862 (DBG14120573) 7. Feature #16655: High power command line support 8. Feature #16849: Firmware upgrade support at managmenet mode 9. Feature #17315: High power feature at management mode ------------------------------------------------------------------------- ------------------------------------------------------------------------- IMPORTANT NOTE: (2015/2/6 update) 1. The file name of this file is changed from DWL6700A1_FW_ReleaseNote to DWL6700AP_FW_ReleaseNote. 2. The checksum and MD5sum in this version for the _A are removed. 3. We did not provide the _A version anymore from now on. At the same time, the AC side (DWC-1000) must upgrade to 4402_WW. 4402_WW F.W. supports DWL-6700AP H.W. platform. 4. Although the h.w. version is changed to A2, the firmware still could run on A1 H.W. without problem. More precisly speaking, our firmare did not distinguish the different h.w. types at this moment. 5. By point of software view, the major difference between A1 and A2 is that A2 removes the external watchdog. ------------------------------------------------------------------------- ------------------------------------------------------------------------- ------------------------------------------------------------------------- Firmware Version: ver4.4.0.1_B006 Firmware Date: Thr, 25, Dec, 2014 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: checksum_A: 0xB423DDFA MD5sum: 76d0598962278366d303317ec4f72186 MD5sum_A: 129e074f09e1e084407d703772fc9dd1 GIT: 63af7feec8aa288e1117a1604a21d548103703fc Problems Resolved & Enhancements: 1. Bug #16706: CP not work and result to 6700 reboot repeatedly 2. Bug #17052: H.W. type should support more than 2 characters. 3. Feature #11169: Recovery feature (Backup feature) support at loader 4. Develop #15382: WLAN client IP report ------------------------------------------------------------------------- Firmware Version: ver4.4.0.1_B005 Firmware Date: Wed, 17, Dec, 2014 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: checksum_A: 0x6F13466D MD5sum: 739e8b53cf7188efaa0536dc5aa590a9 MD5sum_A: 8887070b95a4c90a34aebcc9296ebd63 GIT: cc8234b3fc6df00f1d373805f4334984dd04046d Problems Resolved & Enhancements: 1.Bug #16706: Captive Portal + VLAN not work. Known Bug: 1. Kernel crash sometimes at CP feature. ------------------------------------------------------------------------- Firmware Version: ver4.4.0.1_B004 Firmware Date: Tue, 9, Dec, 2014 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: checksum_A: MD5sum: 8233701cb8051f58da4018be14a4de30 MD5sum_A: 85c9d854c45a8975fb9b8790e9f66fd3 GIT: df10aa095cb5e1fe888a404cdaacebba1ae54d3f Problems Resolved & Enhancements: 1.Bug #16144: Primary channel not correct at bandwidth is 40MHZ 2.Bug #16551: Unstable Wireless Conneciton (TSD#0035593) 3.Bug #16705: Bug fix at low data rate unstable issue. 4.Feature #16456: Blink all LEDs when the "reset" button pressed down longer than 5 seconds 5.Feature #16652: WDS & VAP mutually exclusive 6.Feature #16654: High power ajust GUI remove 7.Develop #15585: Pre-auth feature implementation at managed mode - Relay NOTE: From now on, we release 2 firmwares for 2 different h.w. type report at the same time. For 6600 h.w. type, the version number is appended by _A For example, DWL-6700_FW_v4_4_0_1_B004.bin is for 6700 h.w. type. DWL-6700_FW_v4_4_0_1_B004_A.bin is for 6600 h.w. type. NOTE: The major purpose of this release is to test the 6700 h.w. type report. All features were not tested at all by test team but only few by R&D. ------------------------------------------------------------------------- Firmware Version: ver4.4.0.1_B003 Firmware Date: Wed, 12, Nov, 2014 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: 0xBBCFEEF6 MD5sum: 52bd97b7f11249acc50b6e16c7b84339 GIT: 5591e705453940828e571d306ce73699ae3498b0 Problems Resolved & Enhancements: 1.The status of Scheduler Profile is not consistency after the AP rebooted. (DBG14110008) 2.LED function did not work (DBG14110005) 3.Unable to configure RADIUS IP Address (DBG14110006) 4.MAC Authentication function does not work (DBG14110007) —> not a bug confirmed by D-Link ------------------------------------------------------------------------- Firmware Version: ver4.4.0.1_B002 Firmware Date: Fri, 7, Nov, 2014 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: 0x726719D4 MD5sum: e300e9258bfc543b0a9b3d9ec671527c GIT: f3fbe407843a6b7beeaa81644923fc3f7ebe8478 Problems Resolved & Enhancements: 1.Maintenance - LED Off - Fail to turn off LED (TSD#0034736) 2.Wireless Settings - Input settings no protection (TSD#0033455). 3.Ethernet Settings - Static IP - Input settings no protection (TSD#0033477). 4.Schedule - Add - Incorrect Schedule (TSD#0033515). 5.WDS - ACK Timer Value - Input settings no protection (TSD#0033570). 6.IP won't get a new one when the ethernet cable is plugged to another LAN. 7.VAP(SSID) - Broadcast SSID - Fail to connect to VAP (TSD#0034695). 8.Events - Relay Log - Function fail (TSD#0034699). 9.Status - Radio Statistics - IE8 or IE9 can't show 5GHz WLAN information (TSD#0034733). 10.LED - Incorrect behavior (#TSD0034793). 11.Managed Mode - DUT doesn't apply the new settings (TSD#0034822). 12.Reset button function verification/Reset button should provide the "reboot" and "reset to factory" feature. 13.Ethernet Settings - VLAN Settings - Fail to change VLAN ID(TSD0033518). 14.Basic Settings - Device Information - Hardware Version and Serial Number (TSD#0034696). ------------------------------------------------------------------------- Firmware: v4.4.0.1 Build: B001 Hardware: A1 Date: Fri, 20, Oct, 2014 Firmware Version: ver4.4.0.1_B001 Firmware Date: Mon, 20, Oct, 2014 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: 0xF3926396 MD5sum: fc86bb29aa0072406b9afc0dc48d0e82 GIT: 1e6c3d3e8911d4f89495bc1c0f9c174837c9fe0b Problems Resolved & Enhancements: 1. CP issue. 2. LAN port1, port2 LED exchange. 3. Version.txt format. ------------------------------------------------------------------------- Firmware: v4.3.0.0 Build: B007 Hardware: A1 Date: Fri, 3, Oct, 2014 Firmware Version: ver4.3.0.0_B006 Firmware Date: Fri, 3, Oct, 2014 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: 0xC26A483E MD5sum: 98ce047532be4e1310d03beb61c53b37 GIT: 7db92a2dfcaa8e095150127693bf168cf87b656c Problems Resolved & Enhancements: 1.6700AP lost management. But ping to 6700AP OK, SSH OK. Old client still able to access to Internet (connected to 6700AP), but DWC-1000 didn°¶t have this user°¶s CP session and associated/authenticated recored ------------------------------------------------------------------------- Firmware: v4.3.0.0 Build: B006 Hardware: A1 Date: Fri, 26, Sep, 2014 Firmware Version: ver4.3.0.0_B006 Firmware Date: Fri, 26, Sep, 2014 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: 0xCB500CFA MD5sum: ead701e68ad4865159c91f2d4a6317c9 GIT: b5f1a4cbc1c3d330fe7f2c053c687738ab1e43dd Problems Resolved & Enhancements: 1.LAN port2 LED display incorrectly. 2.Wifi 2.4G & 5G LEDs do not turn on when 6700 is powered on. (they are set to AP mode. ) 3.All 6700AP show same 5GHz channel (manage mode). 4.CP logout user every 10 mins, so user has to login CP again(manage mode). 5.GUI: a consistent layout: 1. Please make sure all the pages have the same ways of alignment.2.Please make sure all the GUIs have the same gap. 6.GUI: Update AP configuration (see pic) 7.GUI: Update manage firmware (see pic) 8.GUI: Update Basic settings (see pic). 9.GUI: Refine GUI layout(see pic). 10.GUI: MAC capital letter(see pic). 11.GUI: MAC display incorrect(see pic). 12.GUI: 5G radio statistics is empty(see pic). 13.GUI: MAC capital letter, ACK time default value, High power setting.(see pic). 14.GUI: Refine the layout.(see pic). 15.Mac address in manage/Ethernet doesn°¶t match Ethernet mac address(see pic). 16.WDS link fail between DWL-6700. 17.GUI: Consistent Layout (Transmit/Receive page). 18.GUI: Consistent Layout (Scheduler Association page) 19.Statistics report back to AC (manage mode). 20.Pre-auth feature implementation at managed mode - pre-auth AP (manage mode). ------------------------------------------------------------------------- Firmware: v4.3.0.0 Build: B005 Hardware: A1 Date: Mon, 1, Sep, 2014 Firmware Version: ver4.3.0.0_B005 Firmware Date: Mon, 1, Sep, 2014 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: 0x11C5F632 GIT: bc9302243c8eb36f14432d6bb77453f556bb6e9e Problems Resolved & Enhancements: 1.set vap0 with hidden ssid,vap1 with ignore broadcast ,then vap2/3 will apply ignore broadcast rule. 2.Mac address is inverse between checklist.txt/version.txt and GUI display. 3.mac address in dhcp discover on wired and wireless are not correct. 4.there is no STP packet on wireless interface (WDS) ,mac address on wired is not correct. 5.set DUT-1 and DUT-2 as WDS ,and dhcp server on the lan of DUT-1 ,when wireless client link to vap2~3 of DUT-2 ,then can get IP ,but try to access web GUI of DUT-2 can't work ,pc on the lan of DUT-2 also can't access the web GUI of DUT-2 (repower on DUT-2 6.(TSD Bug) NTP Server - Fail to use Domain Name when LAN is static IP - Description: When LAN is static IP, NTP will not work with domain name as NTP Server. When LAN is dynamic, there is no this issue. 7.(TSD Bug)ransmit/Receive - Empty Transmit Statistics and Receive Statistics. 8.(TSD Bug)Continuous to send Email every 1 minute. 9.(TSD Bug)Broadcast SSID - Fail to hide SSID Standalone mode - Description: After uncheck Broadcast SSID, Wireless Client still can survey the SSID of DUT. 10.(TSD Bug)WDS - Spanning Tree Mode - Web UI is failed to set to Disable 11.(TSD Bug)4GHz - Channel Settings - Standalone mode. - In 2.4GHz Channel settings, when Channel Bandwidth is set to Auto, there are 2 issues. 1. Set Channel to 8, 9, 10 or 11, although Interface Status show Channel information correctly but actually DUT uses Channel 1. 2. Set Channel to 1, 2, 3 or 4, after apply, Channel settings of UI will change to Auto. 12.(TSD Bug)Ethernet Settings - Incorrect LAN MAC Address Information 13.(D-LINK bUG)Wifi 2.4G & 5G LEDs do not turn on when 6700 is powered on. 14.(D-LINK Bug)Extreme busy LED flashing on L2 switch whenever there are 2+ 6700AP connected to it. ------------------------------------------------------------------------- Firmware: v4.3.0.0 Build: B004 Hardware: A1 Date: Mon, 7, Jul, 2014 Firmware Version: ver4.3.0.0_B004 Firmware Date: Mon, 7, Jul, 2014 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: 0x3532D7B5 GIT: 696770030f2af52f796b51448fe84f23044ba7ec Problems Resolved & Enhancements: 1.LED off function can't work in Maintenance page. 2.when disable QOS (WMM) ,wireless client can't find or link to DUT. 3.email with TLSV1 can't work. 4.in manage/wireless setting page : the default vaule is not the same when enable radio again (ex:max station become to 200 ,but note is only (0~48) ,beacon interval beomes to 20 ,channel is not the same as before. 5.in manage/wireless setting page : default beacon interval in 5Ghz is 200 ,check beacon is 100 ,set to 20 ,check beacon is 100 ,set DTIM to 255 ,check beacon is 1. 6.set 5Ghz -VAP1 with WPA-PSK-TKIP only (from GUI),then wireless client can't link up 7.the field content is empty in wan mac and ssid in version.txt link. 8.manage mode :set hidden ssid for 2 bands ,wireless client still can get ssid. 9.manage mode :set 2.4GHz in 802.11b/g mode ,result is fail to change mode. 10.manage mode :set 5GHz in 802.11a/n mode ,wireless client (a only) can't link up. 11.manage mode :set 5GHz with primary channel in lower ,result is above. 14.WDS. 13.Endurence 72 Hours Issue: 1.in manage/wireless setting page : the default vaule is not the same when enable radio again (ex:max station become to 200 ,but note is only (0~48) ,beacon interval beomes to 20 ,channel is not the same as before 2.in manage/wireless setting page : default beacon interval in 5Ghz is 200 ,check beacon is 100 ,set to 20 ,check beacon is 100 ,set DTIM to 255 ,check beacon is 1. Driver support 100 at least. 3.in manage/wireless setting page : Fragmentation and RTS threshold can't work for both bands. 4.the default manual settings with system time is 2009 but system time shows 2014.==> system time is follow release date time at DWL-6700 platform. 5.manage mode :set beacon interval in 20 ,result is 100 ==> Driver limititation. 6.manage mode :wpa-psk key length supports 32 chars only (dmc-1000 issue ?). 7.manage mode :set 2.4GHz in 802.11b/g mode ,result is fail to change mode 8.manage mode :set 5GHz in 802.11a/n/ac or n/ac mode,wireless client link rate is 54Mbps ==> DWC-1000 issue alway send a mode not ac mode when select this option. 9.manage mode :set 2.4GHz with 40Mhz ,check beacon only in 20Mhz. 10.manage mode :set wireless protection mode:auto ,check beacon-HT-info ,result not set. ------------------------------------------------------------------------- Firmware: v4.3.0.0 Build: B003 Hardware: A1 Date: Mon, 23, Jun, 2014 Firmware Version: ver4.3.0.0_B003 Firmware Date: Mon, 23, Jun, 2014 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: 0x34DA2615 GIT: 55a77123b4143d119eb2aeb9e3e6eefe0ffef73c Problems Resolved & Enhancements: 1.when wireless client link 2.4Ghz band ,LED can blink ,but when link with 5Ghz ,LED can't blink 2.set manual ntp with 2002 ,GUI shows 2009 ,set 2037 GUI shows 2020 3.when disable QOS (WMM) ,wireless client can't find or link to DUT 4.help page issue ->hide this phase. 5.enable Load balancing ,GUI returns 404 not foound ->hide this phase. 6.serial number and hardware version has no defination on basic setting page. 7.when change 5G hz mode to 802.11n , the description in status/interface/mode is not correct (shows "2.4ghz°K.") 8.in manage/ethernet setting page ,change default vlan id can't work GUI always in 1 9.in manage/wireless setting page : the default vaule is not the same when enable radio again (ex:max station become to 200 ,but note is only (0~48) ,beacon interval beomes to 20 ,channel is not the same as before 10.in manage/wireless setting page : set disable short GI for both bands ,check beacon ,it still enabled 11.in manage/wireless setting page : Fragmentation and RTS threshold can't work for both bands 12.h/w reset button can't work. 13.not support ipv6 radius server (GUI not removed) 14.try to enable radius fail throughput and radius account ,result :GUI shows disabled. 15.seclect any radius server (disable global radius),then wireless client can't link success with DUT. 16.not support redirect URL (GUI or manage mode)-->not support ------------------------------------------------------------------------- ------------------------------------------------------------------------- Firmware: v4.3.0.0 Build: B002 Hardware: A1 Date: Fri, 23, May, 2014 Firmware Version: ver4.3.0.0_B002 Firmware Date: Fri, 23, May, 2014 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: 0x882DB292 GIT: 1b217d84c52a85c2fab02d728f0bf19ca24e6cec Problems Resolved & Enhancements: 1. Full Function Test. 2. Bug--Bridge Mac Address is incorrect. When we bridge ethernet and wifi address. br0 will use eth1 mac. It do'nt match the Lan Mac address and AC will no the AP Address and deny AP. 3, Bug--disable WMM from DUT (standalone) , wireless client can°¶t link with both band , enable WMM also can°¶t recover it. 4. Bug--there is no WMM tag in probe response or associate response. 5. Bug--in status/interface ,wireless mac address for 2.4Ghz is not the same in wireless seting page. 6. Bug--deault beacon interval in GUI is 200 for 5Ghz, check beacon is 100. 7. Bug--when enable WDS function ,wireless client can't get dhcp ip afer link DUT (dhcp server on lan side) ,DUT has no no response when dhcp server respone with dhcp offer. 8. New--High Power at standalone.(It can enabled when Tx power is 100%) High power at managed mode is It must get high power configure value from nvram when AC set Tx power is 100%. 9. New--ACK time. (Check wifi ack packages interval time). 10.Do'nt verify it--default legacy rate set (supported rate) fot 2.4Ghz in GUI doesn't match with beacon.Driver not support. 11.Do'nt verify it--WDS 6700 with 6700.(driver issue) 12.Do'nt verify it--back to back feature (the 2nd LAN port) 13.Do'nt verify it--multi-radius feature at standalone mode. ------------------------------------------------------------------------- ------------------------------------------------------------------------- Firmware Version: ver4.3.0.0.1 Firmware Date: Mon, 12, May, 2014 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: 0xFF11F637 GIT: 5b86b7a44798ee79ddb4af4dac42a78d1e253137 Problems Resolved & Enhancements: 1. Firmware Version change to ver 4.3.0.0(D-Link keep 4.3.0.1,now release use 4.3.0.0_B00x) ver 4.3.0.0_B001 2. Disallow client login when AP is at managed mode. 3. push "connect" has no response when finishing upgrade f/w from (DUT got IP from dhcp server). 4. there is no 5Ghz client list in status/client association page. 5. in chklst.txt wireless information is not complete (ssid /chanel list is empty) ,firmware version has no Bxx ,and no version.txt 6. add wireless client to "allow" list in mac authnetication,set DUT via DWC-100 with local authentication and wpa-psk for all wireless interface ,result : wireless client can't link with 5Ghz on VAP2 7. radio statistics is blank for 5Ghz. 8. Support WMM on wireless interface at managed/standalone mode. 9. Support Client isolation on wireless interface at Standalone mode. 10. Support AP Profile - Radio page - Maximum Clients. 11. Support AP Profile - Network page - Ignore broadcast. 12. Support AP Profile - Radio page - Ack time. 13. Support Recovery feature (Backup feature) support at loader. ------------------------------------------------------------------------- ------------------------------------------------------------------------- Firmware: v4.3.0 Build: 01 Hardware: A1 Date: Fri, 11, Apri, 2014 Firmware Version: ver4.3.0.1 Firmware Date: Fri, 11, Apri, 2014 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: 0x0DC39958 GIT: d80c78504df322c6514cf02b149888a901f26793 Problems Resolved & Enhancements: 1.VAP standalone :browser GUI will pop prompt message "VAP4 key refresh rate should be 0~86400" when save setting with WPA-enterprise 2.set DUT in WPA-enterprise with vlan tag via GUI or DWC-1000 ,wireles cloent can't link DUT (no radius packet on wired) 3.mac authentication :standalone ,mac authentication for each VAP can work (block) when enable mac auth-local on one VAP then disable it via GUI again 4.mac authentication :management ,Wireless client can°¶t link up (wpa-psk) when enable local mac auth via DWC-1000 (wireless client in on allow list or not in block list 5.mac authentication :management : Set mac auth with radius and vlan tag ,wireless can't link up 6.mac authentication :management : Set mac auth with radius and none security ,wireless can link up without mac authentication 7.NO redirect action with DWC-1000 CAPATIVE PORTAL FUNCTION (compare with DWL-6600) 8.WDS link FAIL with DWL-6600 ,Only Support 5GHZ 9.In wireless setting page, 2.4Ghz and 5Ghz has the sam emac address 10.Add Login Password is admin (must restore to default when upgrade) 11.Default IP change 192.168.0.50 to 10.90.90.91 (must restore to default when upgrade) 12.Firmware Version change to ver 4.3.0.1(Official release) ver 4.3.0.1_B00x(Beta) 13.set default value Base IP port is 57775 on webpage "Managed Mode Configuration Parameters" 14.Remove GUI "Maximum Sessions" on Webpage "Configure Web Server Settings". 15.Change name "VAP" to "VAP(ssid)" 16.Change the "Station Isolation" setup to drop-down list. default is No(No|Yes) 17.Change the 5GHz "Channel Bandwidth" with default 40 MHz (Dld version is Auto) 18.Change name "Managed AP DHCP" to "Managing switch IP via DHCP option 43" 19.Change name "Managed Access Point" to "Managed Mode Configuration Parameters" ------------------------------------------------------------------------- Firmware: v1.00 Build: 04 Hardware: A1 Date: Wed, 12, Mar, 2014 Firmware Version: ver1.00b04 Firmware Date: Wed, 12, Mar, 2014 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: 0x324028F8 GIT: 9c6aa119c4d4cb50e5d2d3f51f596f01dd0eb27c Problems Resolved & Enhancements: 1.VAP(standalone & management mode). 2.Basic setting: WiFi STA with different security(None, WPA persoanal, WPA enterprise) connect to DWL-6700 3.Static VLAN (VAP VLAN): 3.1 The packets with VLAN tag from DWL-6700 Ethernet(unicast, broadcast, multicast) 3.2 The packets without VLAN tag between WiFi STA 3.3 Verifity 3.1 &3.2 bleow with differnet security mode. 4.Dynamic VLAN: 4.1 The packets with VLAN tag that RADIUS server assign WiFi STA through DWL-6700 Ethernet (unicast, broadcast, multicast) 4.2 The packets with static VLAN tag tag that no RADIUS server assign WiFi STA through DWL-6700 Ethernet (unicast, broadcast, multicast) 4.3 The packets without VLAN tag between WiFi STA 4.4 Verifity 4.1&4.2&4.2 bleow with differnet security mode. 5.MAC Authentication: 6.Captive Portal: 7.WDS-VLAN 7.1 DWL-6700 to DWL-6700 7.2 DWL-6700 to DWL-6600 7.3 WDS packet with VLAN tag. 7.4 NO WDS client packet without VLAN tag 8.Throughput test: 8.1 2.4G / 5G 8.2 WDS ------------------------------------------------------------------------- Firmware: v1.00 Build: 03 Hardware: A1 Date: Thu, 26, Dec, 2013 Firmware Version: ver1.00b03 Firmware Date: Thu, 26, Dec, 2013 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: GIT: Problems Resolved & Enhancements: 1. Fixed interface radio 0 switch to "always" in schedler association page (none-VAP). 2. Fixed scheduler profiile can has duplicate name. 3. managed mode: WPA-Enterprise, MAC authenication support 4. standalone mode: WPA-Enterprise 5. Manage Mode : AC(DWL-1000) get support channel from AP ------------------------------------------------------------------------- Firmware: v1.00 Build: 02 Hardware: A1 Date: Thu, 19, Dec, 2013 Firmware Version: ver1.00b02 Firmware Date: Thu, 19, Dec, 2013 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: 0x86EDDE9A GIT: 8830ebddd30e20427a4f59473b0e8a4467a33e7b,Thu, 19 Dec 2013 15:58:12 +0800 Problems Resolved & Enhancements: 1. Manage -> Managed Access Point The host name in dhcp discovery is dwl-6700 ,but in GUI has another name 2. Status -> Transmit and Receive statistics page. There is no TX statistics for 5Ghz 3. Access Point Info->APs Summary Status :can not show channel info 4. GUI spec. Manage -> wireless settings modified 5.1 Channel and Channel Bandwidth settings 5.2 Primary Channel settings 5.2 modify default values 5. Status -> Client Associations There is no Client Associations list for 5Ghz 6. Status -> Radio Statistics all interfaces are empty ------------------------------------------------------------------------- Firmware: v1.00 Build: 01 Hardware: A1 Date: Thu, 28, Nov, 2013 Firmware Version: ver1.00b01 Firmware Date: Thu, 28, Nov, 2013 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: 0xC217BD47 GIT: cee9994e063e9ceece594fb1ae0759e071cee1af,Thu, 28 Nov 2013 14:54:10 +0800 Problems Resolved & Enhancements: 1. Manage -> MAC Authentication 2. Manage -> WDS 3. Manage -> VAP 4. Manage -> Managed Access Point 5. Manage -> Scheduler 6. Manage -> Scheduler Association 7. Status -> Transmit and Receive statistics page 8. Status -> Client Associations 9. Status -> Managed AP DHCP 10. Status -> Radio Statistics 11. Basic Settings 12. Services -> Email Alerts: Test Mail function and Log Duration 13. Manage Mode : 13.1 AC(DWL-1000) Status->Traffice Monitor-> Managed AP Statistics->View VAP Detail 13.2 AC(DWL-1000) Status->Traffice Monitor-> Managed AP Statistics->View radio Detail 13.3 MAPD should work when AP set Managed AP DHCP ------------------------------------------------------------------------- Firmware: v1.00 Build: 00 Hardware: A1 Date: Wed, 30, Oct, 2013 Firmware Version: ver1.00b00 Firmware Date: Thu, 31, Oct, 2013 KERNEL: 2.6.31-mips Wireless Domain: 0x3A checksum: 0xE711647C GIT: 7b0af8ab8f5eea431d7755bc7296938a76c3f760,Thu, 31 Oct 2013 10:12:51 +0800 Problems Resolved & Enhancements: 1. Manage -> Ethernet Setting (IPv6 function is not ready) 2. Status -> Interfaces (IPv6 function is not ready) 3. Support Login and Logout 4. Maintenance -> Configuration Save 5. Maintenance -> Configuration Restore 6. Maintenance -> Maintenance 7. Maintenance -> Upgrade 8. Services -> Time Settings (NTP) 9. Support version.txt 10. Services -> Web Server 11. Manage Mode :Set A new AP profile for AC(DWL-1000). 11.1 AC(DWL-1000) SETUP->AP Management(Only Vaild Access Point ready) 11.2 AC(DWL-1000) ADVANCED->AP Profile 11.3 AC(DWL-1000) Status->Traffice Monitor-> Managed AP Statistics 12. Support Standalone Mode 12.1 Support radio interface. 12.2 Support wireless mode like 802.11b,g,n...etc. 12.3 Support Channel by Manual and Auto. 12.4 Support Station Isolation in the same ssid. 12.5 Support Channel Bandwidth 40/20. 12.6 Support Short Guard Interval. 12.7 Support Protection. 12.8 Support Beacon Interval. 12.9 Support DTIM Period. 12.10 Support Fragmentation Threshold. 12.11 Support RTS Threshold. 12.12 Support Maximum Stations. 12.13 Support Fixed Multicast Rate. 12.14 Support Supported Rate. 12.15 Support Basic Rate. 12.16 Support Setting TX Power 13. Support Managed Mode 13.1 Support radio interface. 13.2 Support wireless mode like 802.11b,g,n...etc. 13.3 Support Channel by Manual and Auto. 13.4 Support Station Isolation in the same ssid. 13.5 Support Channel Bandwidth 40/20. 13.6 Support Short Guard Interval. 13.7 Support Protection. 13.8 Support Beacon Interval. 13.9 Support DTIM Period. 13.10 Support Fragmentation Threshold. 13.11 Support RTS Threshold. 13.12 Support Maximum Stations. 13.13 Support Fixed Multicast Rate. 13.14 Support Supported Rate. 13.15 Support Basic Rate. 13.16 Support Setting TX Power