Product: DSL-504T ADSL Router with 4-port switch for DLinkEU
Release version: V2.00B01T01.EU.20050630
Release date: 2005/06/30

New Features:

1. ADSL2/2+ support
2. SNMP agent
3. DDNS client
4. Improved IP Filter
5. IP unnumber & Static IP for PPP support 

<Release NOTE>:
 
* Fix it can not add staic route rule into routing table after system save&reboot.

<HISTORY NOTES>

<2005/06/09>

1.The default setting of VPI/VCI of PVC1~PVC7 is 0/0
2.When using PPPoE connection with manual ,there are some abnormal message in WAN setting. 
3.PPP MTU:There is a difference between the default MTU configuration (1400) in the WAN section 
  what is shown in the router logs: Sep 8 12:00:43> Default Asymmetric MTU for ppp0 1500.
4.Tools->Firmware: It doesn't  check the invalid file when user uses the wrong file .
5.WAN->PPP mode->MTU : The message error happened when MTU field check it.it will show 
  "MTU can't be less than 40" . But we input 80 value still occur it.
6.Advanced->DMZ: The DSL-504T's default lan ip address is 192.168.1.1 but the ip address 
  of DMZ can be configured to ex 200.1.1.2(not same network as LAN IP).  

<2005/04/30>


*MODIFY : add RIP2 option and help description on web page 
*MODIFY : DDNS malfunction
*MODFIY : add default DNS ip in config.xml


(1)Default settings 
   Modulation Type: Multi-mode 
   connection1: PPPoE LLC VPI/VCI : 8/35 
   User name : admin 
   Password : admin 
   IP Address: 192.168.1.1
   Subnet Mask: 255.255.255.0 

(2)ATM Driver    4.03.03.00 
   DSL HAL       3.02.00.03 
   DSL Datapumps 3.02.06.00 Annex A