Product: DSL-504T ADSL Router with 4-port switch for DLinkEU Release version: V2.00B01T01.EU.20050630 Release date: 2005/06/30 New Features: 1. ADSL2/2+ support 2. SNMP agent 3. DDNS client 4. Improved IP Filter 5. IP unnumber & Static IP for PPP support : * Fix it can not add staic route rule into routing table after system save&reboot. <2005/06/09> 1.The default setting of VPI/VCI of PVC1~PVC7 is 0/0 2.When using PPPoE connection with manual ,there are some abnormal message in WAN setting. 3.PPP MTU:There is a difference between the default MTU configuration (1400) in the WAN section what is shown in the router logs: Sep 8 12:00:43> Default Asymmetric MTU for ppp0 1500. 4.Tools->Firmware: It doesn't check the invalid file when user uses the wrong file . 5.WAN->PPP mode->MTU : The message error happened when MTU field check it.it will show "MTU can't be less than 40" . But we input 80 value still occur it. 6.Advanced->DMZ: The DSL-504T's default lan ip address is 192.168.1.1 but the ip address of DMZ can be configured to ex 200.1.1.2(not same network as LAN IP). <2005/04/30> *MODIFY : add RIP2 option and help description on web page *MODIFY : DDNS malfunction *MODFIY : add default DNS ip in config.xml (1)Default settings Modulation Type: Multi-mode connection1: PPPoE LLC VPI/VCI : 8/35 User name : admin Password : admin IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 (2)ATM Driver 4.03.03.00 DSL HAL 3.02.00.03 DSL Datapumps 3.02.06.00 Annex A