******************************
Section A. UPGRADE INSTRUCTION
******************************

For users of Microsoft Windows, please run All_V3.04.EXE
directly. It will search the Router on your LAN and ask
you to type system password. Just type in the password
and click "Upgrade" button. It takes about 30 seconds
to finish the whole procedure.

For users of other platforms, please refer Section D for
platform-independent upgrade.

******************************
Section B. UPGRADE INFORMATION
******************************

The files will upgrade the firmware of your Cable/DSL
Router to version V3.04.

1. NOTE! DO NOT POWER OFF THE UNIT WHEN THE UNIT IS BEING
UPGRADED, OR THE UNIT MAY BE DAMAGED.

2. The configuration will not be changed. You need not
configure it again.

*************************
Section C. CHANGE HISTORY
*************************

****** V3.01b6(2004.01.14) TO V3.04 **********
1.Rename from V3.01b6(2004.01.14).

****** V3.01b6(2003.12.05) TO V3.01b6(2004.01.14) **********
1.Change Domail filter seat.

****** V3.01b6 TO V3.01b7(Test Version) **********
1.Add default gateway with PPTP WAN type.

****** V3.01b6 TO V3.03 **********
1.Rename from V3.01b6(2003.12.05).

****** V3.01b5 TO V3.01b6(2003.12.05) **********
1.Fix DynDNS update problem.
  A. Stop continuing to update if authentication failed.
  B. Add model name and firmware version into agent information.
2.Fix SNMP counter bug (can't over 2^31)
3.Fix WEB Configuration can't be connect after remote administrator
  saved settings.

****** V3.01b4 TO V3.01b5(Test Version) **********
1.Add PPTP gateway support.

****** V3.01b3 TO V3.01b4(Test Version) **********
1.Support Telia WAN Type.

2.Add Daylight Saving function.

****** V3.02 (for DI-604 only)**********
1.Support L2TP WAN type.

****** V3.01b2 TO V3.01b3(Test Version) **********
1.Fix L2TP WAN Type bug.

****** V3.01b1 TO V3.01b2(Test Version) **********
1.Support L2TP WAN Type.

****** V3.01b1 TO V3.01 ********
1.Rename from V3.01b1.

****** V3.00 TO V3.01b1 ********

1.Fix Visual Server bug.

2.Fix FW to prevent DOS attack as listed below
a.http://RouterWANIP:8080/AA..~A from WAN when enable remote administration.
b.http://RouterWANIP/AA..~A from LAN.
c.http://RouterWANIP/syslog.htm?D=AA..~A from LAN.

3.Fix PPPoE can't connect.

****** V1.81 TO V3.00 **********

1. Only accept 255.255.255.x (Subnet mask) in LAN setting.

2. Set VPN Pass-Through default to enable.

3. Domain filter can¡¦t add more filter lists.

******  V1.80 TO V1.81 **********

1. Fix Upnp bug.

****** V1.70 build 7 TO V1.80 **********

1. Update scheduling, the default setting is Always. 

2. Discard firmware upgrade link.

3. Add TZO.com option into DDNS function.

4. Add MAC-IP mapping function in MAC filter.

5. Fix : If we enable syslog function when SPI is enable, it will cause SPI disabled.

****** V1.70 build 6 TO V1.70 build 7 **********

1. Add SPI Mode .

*** V 1.70 build 6 **********

First release for new style web user interface.

************************************************
Section D. Platform-independent Firmware Upgrade
************************************************

First, go to the D-Link Web site to download firmware image
file, ALL_V304.BIN. Remember the location you save this file.
And use the following method to upgrade:

* WEB UPGRADE:

1. Connect the Web user interface and login as system
administrator.

2. Click the "Firmware Upgrade" button of "Tools" page.
And the "Firmware Upgrade" screen will appear.

3. Enter the location of the previously downloaded file in
the text box, or click "Browse" button to search for the
file. And then click "Upgrade" button.