DIR-825WWB1 Firmware Release Note  
=======================================

Firmware: v2.10WW Build: 01
Hardware: B1
Date: 27, Nov, 2015
checksum: 0x07C2E8F5  

Problems Resolved & Enhancements:
1. Update KCodes NetUSB.ko to fix Buffer Over issue.
=======================================

Firmware: v2.09WW Build: 06
Hardware: B1
Date: 13, Mar, 2013
checksum: 0x07C2ACD7 

Problems Resolved & Enhancements:
1. Fixed that Rapid7 UPnP vulnerability.
=======================================

Firmware: v2.09WW Build: 05
Hardware: B1
Date: 04, Feb, 2013
checksum: 0x07C2021F

Problems Resolved & Enhancements:
1. Fixed Internet LED will be off when WAN type is PPTP/L2TP with always ON. Even the cable is connected, it will be OFF if it's failed to contact PPTP/L2TP server. 
It’s happened when device does not have DHCP and cannot assign an IP address
=======================================

Firmware: v2.09WW Build: 04beta01
Hardware: B1
Date: 22, Jan, 2013
checksum: 0x07C216DA

Problems Resolved & Enhancements:
1. Fixed Tools -> Time -> Set the Date and Time Manually year to 2037
=======================================

Firmware: v2.09WW Build: 04
Hardware: B1
Date: 29, Nov, 2012
checksum: 0x07C25647
	
Problems Resolved & Enhancements:
1. Fixed IPv6 routing status page is missing. 
=======================================

Firmware: v2.09WW Build: 03
Hardware: B1
Date: 22, Nov, 2012
checksum: 0x07C2D2D6
	
Problems Resolved & Enhancements:
1. Support IPv6 ULA feature.
2. Fixed: Beacon interval issue. Modify lower limit for beacon to be 40.
=======================================

Firmware: v2.09WW Build: 02
Hardware: B1
Date: 27, Aug, 2012
checksum: 0x07C0163B
	
Problems Resolved & Enhancements:
1. Sync DIR-825B1 NA, support IPv6 v1.17R+ UNH-IOL IPv6 Test plan v1.00b7.
2. QRS mobile 1.0.1.1
3. Fixed TSD Bug#14778: Clicking "Don't Save Settings" button will clear check box in web uI.
4. Fixed TSD Bug#14539: Admin and User password can use "Full-width", but user will not able to login after new password is saved.
5. Fixed TSD Bug#14519: Routing rule can be saved if using one single digit as rule name.
=======================================

Firmware: v2.09WW Build: 01
Hardware: B1
Date: 02, Jul, 2012
checksum: 0x07C08175
	
Problems Resolved & Enhancements:
1. Fixed WPA-PSK key cannot save.
2. TSD bug :12618  Modify When we use “NetBIOS node type - Broadcast only”, Primary WINS IP Address and Secondary WINS IP Address should be gray out
3. TSD bug :12564  Fixed Error: Setting will be cleared by click “Don’t Save” button.
4. Fixed igmp multicast snooping issue,( DIR-825B1 belongs to “Acceptable case”)
=======================================

Firmware: v2.08WW Build: 04
Hardware: B1
Date: 23, Mar, 2012
checksum: 0x07DE41FC

Problems Resolved & Enhancements:
1. Base on IPv6 Spec v1.17R (without firewall, ds-lite)
Support No Education Fits All; No Child Left Behind Policy
Support UNH-IOL IPv6 IOT Test Plan v1.00B7
=======================================

Firmware: v2.08WW Build: 03
Hardware: B1
Date: 14, Mar, 2012
checksum: 0x07DE3D23

Problems Resolved & Enhancements:
1. QRS mobile can’t configure DUT, when DUT set admin password and iPad/iPhone connected to DUT with 5GHz.
=======================================

Firmware: v2.08WW Build: 02
Hardware: B1
Date: 14, Feb, 2012
checksum: 0x07DEEFC7 

Problems Resolved & Enhancements:
1. Fixed QRS can not successful initialized issue (always connect to router 404 error page when wan is not alive)
=======================================

Firmware: v2.08WW Build: 01
Hardware: B1
Date: 10, Feb, 2012
checksum: 0x07DE7AF4

Problems Resolved & Enhancements:
1. Support QRS Mobile. 
=======================================

Firmware: v2.06WW Build: 04
Hardware: B1
Date: 20, Jan, 2012
checksum: 0x07DB8D29

Problems Resolved & Enhancements:
1. Fixed when in default setting, client tool can’t use DUT PIN code to configure DUT.
=======================================

Firmware: v2.06WW Build: 03
Hardware: B1
Date: 20, Jan, 2012
checksum: 0x07DB8DD8

Problems Resolved & Enhancements:
1. Fixed when disable WPS PIN, client still can use WPS PIN to connect DUT.
=======================================

Firmware: v2.06WW Build: 02
Hardware: B1
Date: 19, Jan, 2012
checksum: 0x07DBFC87

Problems Resolved & Enhancements:
1. Modify Disabled WPS-PIN default value to 1.
=======================================

Firmware: v2.06WW Build: 01
Hardware: B1
Date: 11, Jan, 2012
checksum: 0x07DBFB14

Problems Resolved & Enhancements:
1.Due to D-Link urgent request, this FW is based on previous shipping FW version V2.05WWB07, and add Disable WPS-PIN method.
=======================================

Firmware: v2.05WW Build: 07Beta09
Hardware: B1
Date: 05, Jan, 2012
checksum: 0x07DD2B0D

Problems Resolved & Enhancements:
1. Fix radvd sending RA abnormally frequency again
=======================================

Firmware: v2.05WW Build: 07Beta08
Hardware: B1
Date: 05, Jan, 2012
checksum: 0x07DD6F16

Problems Resolved & Enhancements:
1. Fix radvd sending RA abnormally frequency
=======================================

Firmware: v2.05WW Build: 07Beta07
Hardware: B1
Date: 30, Dec, 2011
checksum: 0x07DDCF98

Problems Resolved & Enhancements:

1. Upgrade radvd for fixed CVE-2011-3602, CVE-2011-3604, CVE-2011-3605 security issue Ref:  http://www.debian.org/security/2011/dsa-2323
=======================================

Firmware: v2.05WW Build: 07Beta06
Hardware: B1
Date: 13, Dec, 2011
checksum: 0x07DE19E0

Problems Resolved & Enhancements:
1. Fixed: DIR-825B1_v2.05WW-DDNS doesn’t update the correct WAN IP.
=======================================

Firmware: v2.05WW Build: 07Beta05
Hardware: B1
Date: 16, May, 2011

Firmware Version: ver2.05WWb07Beta05
Firmware Date: Mon, 16, May, 2011
checksum: 0x07DD4873

Problems Resolved & Enhancements:
1. Fixed Broken page of WEBUI.
=======================================

Firmware: v2.05WW Build: 07Beta04
Hardware: B1
Date: 09, May, 2011

Firmware Version: ver2.05WWb07Beta04
Firmware Date: Mon, 09, May, 2011
checksum: 0x07DCB3D8

Problems Resolved & Enhancements:
1. Fixed the bug that DLNA client can’t find DLNA server when Enable multicast and NO WAN connection.
2. Fixed the bug that DUT can not send out IGMP packet which from LAN PC.
=======================================

Firmware: v2.05WW Build: 07Beta03
Hardware: B1
Date: 09, May, 2011

Firmware Version: ver2.05WWb07Beta03
Firmware Date: Mon, 09, May, 2011
checksum: 0x07DBDE07 

Problems Resolved & Enhancements:
1. Fixed the bug that DUT can not send out IGMP packet which from LAN PC.
=======================================

Firmware: v2.05WW Build: 07Beta02
Hardware: B1
Date: 06, May, 2011

Firmware Version: ver2.05WWb07Beta02
Firmware Date: Fri, 06, May, 2011
checksum: 0x07DCC0B7

Problems Resolved & Enhancements:
1. Fixed that DLNA client can’t find DLNA server when Enable multicast and NO WAN connection.
=======================================

Firmware: v2.05WW Build: 07Beta01
Hardware: B1
Date: 01, Apr, 2011

Firmware Version: ver2.05WWb07Beta01 
Firmware Date: Fri, 01, Apr, 2011 
checksum: 0x07DB7A92

Problems Resolved & Enhancements:
1. Fixed NTP cannot work correctly.
=======================================

Firmware: v2.05WW Build: 07
Hardware: B1
Date: 27, Dec, 2010 

Firmware Version: ver2.05WWb07 
Firmware Date: Mon, 27, Dec, 2010 
checksum: 0x07DB4BB6

Problems Resolved & Enhancements:
1. Fixed 5G DTIM Interval can input 0.
=======================================

Firmware: v2.05WW Build: 06
Hardware: B1
Date: 22, Dec, 2010 

Firmware Version: ver2.05WWb06 
Firmware Date: Wed, 22, Dec, 2010 
checksum: 0x07DB4892

Problems Resolved & Enhancements:
1. Fixed TSD#12: L2TP descriptions texts error. It should be "Dynamic IP".
2. Fixed TSD#9: BT issue. (device reboot)
3. Fixed TSD#6: Sometime Logs function display error web page.
4. Fixed TSD#3: Sometime Device info display error web page.
5. Fixed TSD#2: WCN issue.
6. Fixed TSD#1: 2.4G DTIM Interval can input 0.
7. NOT support TSD#11: USB port with USB Disk, USB Print or USB Scanner, data transmission, LED not Blue Blinking.
8. NOT support TSD#5: Input MSN.com and msn.com cannot display warning message.
9. NOT support TSD#4: Suggest Internet sessions add “priority" field.	
10. Support IPv6 Spec v1.14R phase 2. (Without IPv6 firewall)	
=======================================

Firmware: v2.05WW Build: 05Beta01
Hardware: B1
Date: 13, Dec, 2010 

Firmware Version: ver2.05WWb05Beta01 
Firmware Date: Mon, 13, Dec, 2010 
checksum: 0x07E2A657

Problems Resolved & Enhancements:
1. Fixed beta firmware.
=======================================

Firmware: v2.05WW Build: 05
Hardware: B1
Date: 10, Dec, 2010 

Firmware Version: ver2.05WWb05 
Firmware Date: Fri, 10, Dec, 2010 
checksum: 0x07DB861F


Problems Resolved & Enhancements:
1. Support IPv6 Spec v1.14R phase 1
2. Fixed when choice time format to 12-hour. Set start time to 11:00AM, end time to 12:00PM and save setting. Then edit the Schedule Rule List. The end time would displayed 12:00AM not 12:00PM. 
3. Fixed When the "Account name" field is empty, the "Save settings" button still can be pressed and applied without any warning message.
4. Modify DDNS Type option: www.dlinkddns.com(Free),www.dyndns.com(Custom),www.dyndns.com(Free)
5. Fixed host name cannot empty.	
=======================================

Firmware: v2.05WW Build: 04
Hardware: B1
Date: 25, Nov, 2010 

Firmware Version: ver2.05WWb04 
Firmware Date: Thu, 25, Nov, 2010 

checksum: 0x07DC12A8

Problems Resolved & Enhancements:
1. Support IPv6 to V1.13R. (Do not support IPv6 firewall). 
2. Add CONF_VERSION[].
3. Fixed BT reboot issue.
=======================================

Firmware: v2.05WW Build: 03
Hardware: B1
Date: 5, Oct, 2010 

Firmware Version: ver2.05WWb03 
Firmware Date: Tue, 05, Oct, 2010 
checksum: 0x07E4C962

Problems Resolved & Enhancements:
1. Fixed sometimes wireless client will fail when login GUI, then reboot DUT cause nvram restore to default .   
2. Fixed sometimes wan fail, when client user link to Google, it will go to LOGIN webpage, not go to 404 Page.
3. DWM-156 A3 will fail sometimes.
=======================================

Firmware: v2.05WW Build: 02
Hardware: B1
Date: 1, Oct, 2010 

Firmware Version: ver2.05WWb02 
Firmware Date: Fri, 01, Oct, 2010 
checksum: 0x07E51344

Problems Resolved & Enhancements:
1. Fixed that 6to4 relay can't support dns.
2. Fixed that lan ipv6 addr not clear when dhcp-pd released. 
3. Fixed Static IPv6 Prefix Length Issue(must be Integer and in range of 1~126).
4. Fixed Save configuration very slow.
5. Fixed wepkey only support one key. (Removed Default WEP Key option)
6. Support DWM-152/156 A3
=======================================

Firmware: v2.05WW Build: 01 Beta01
Hardware: B1
Date: 30, Sep, 2010 

Firmware Version: ver2.05WWb01Beta01 
Firmware Date: Thu, 30, Sep, 2010 
hecksum: 0x07E456B2
Problems Resolved & Enhancements:
1. Fixed DIR-825_B1_v2.01WWB07Beta01-Multicast issue with enabled NETWORK FILTER.
=======================================

Firmware: v2.05WW Build: 01
Hardware: B1
Date: 29, Sep, 2010 

Firmware Version: ver2.05WWb01 
Firmware Date: Wed, 29, Sep, 2010 
checksum: 0x07E52ABA
Problems Resolved & Enhancements:
1. Fixed WEP Key only support one key. 
2. Enable option 33/121 for Russia
3. Support DWM-152/156 A3
4. Support IPv6 to V1.12R. (Do not support IPv6 firewall).
=======================================

Firmware: v2.04WW Build: 01 Beta01
Hardware: B1
Date: 23, Sep, 2010 

Firmware Version: ver2.04WWb01Beta01 
Firmware Date: Thu, 23, Sep, 2010 
checksum: 0x07E4A39B
Problems Resolved & Enhancements:
1. Fixed that beacon stuck caused by some STA can send action frame to inform AP to switch to HT20 which is not necessary.
=======================================

Firmware: v2.04WW Build: 01
Hardware: B1
Date: 03, Sep, 2010 

Firmware Version: ver2.04WWb01 
Firmware Date: Fri, 03, Sep, 2010 
checksum: 0x07E42241
Problems Resolved & Enhancements:
1. Revised firmware version to 2.04
=======================================

Firmware: v2.02WW Build: 14
Hardware: B1
Date: 26, Aug, 2010 

Firmware Version: ver2.02WWb14 
Firmware Date: Thu, 26, Aug, 2010 
CheckSum: 0x07E250B7
Problems Resolved & Enhancements:
1. Fixed when user only change Lan settings, pop change IP address message.
2. Support DLink DNSSEC Spec.
=======================================

Firmware: v2.02WW Build: 13
Hardware: B1
Date: 5, Jul, 2010 

Firmware Version: ver2.02WWb13 
Firmware Date: Mon, 5, Jul, 2010 
CheckSum: 0x07E34E5C
Problems Resolved & Enhancements:
1.Fixed: When we change the DUT's password and save it.It can't back to login GUI page.
2.Fixed: [Status ---> Devices Info ---> LAN Computers] WLAN PCs' information does not be displayed. Fixed display WAN site network IP address at LAN computer list.
=======================================

Firmware: v2.02WW Build: 12
Hardware: B1
Date: 2, Jul, 2010 

Firmware Version: ver2.02WWb12 
Firmware Date: Fri, 2, Jul, 2010 
CheckSum: 0x07E30502
Problems Resolved & Enhancements:
1. Fixed: [WebUI] It is incorrect. Please refer to the screenshot attached.(IE7)
2. Fixed: When we change the DUT's password and save it.It can't back to login GUI page.
3. Fixed: [Status ---> Devices Info ---> LAN Computers] WLAN PCs' information does not be displayed.
=======================================

Firmware: v2.02WW Build: 11
Hardware: B1
Date: 17, Jun, 2010 

Firmware Version: ver2.02WWb11 
Firmware Date: Thu, 17, Jun, 2010 
CheckSum: 0x07E37801
Problems Resolved & Enhancements:
1. Verify: IPv6 DHCPv6 mode isse.
2. Fixed: When the My USB type is: "WCN Configuration" and "3G USB Adapter", the "Shareport for guest zone" should NOT display.
3. Fixed: When user input Invalids IP Address in Virtual Server page as below. (Invalids IP: 0.0.0.0 and 255.255.255.255)
4. Fixed: Russia PPPoE  error message issue.
5. Verify: [WebUI] It is incorrect. Please refer to the screenshot attached.(IE7)
=======================================

Firmware: v2.02WW Build: 10
Hardware: B1
Date: 3, Jun, 2010 

Firmware Version: ver2.02WWb10 
Firmware Date: Wed, 03, Jun, 2010 
CheckSum: 0x07E259D6
Problems Resolved & Enhancements:
1. Verify PureNetwork HNAP testing. 
=======================================

Firmware: v2.02WW Build: 09
Hardware: B1
Date: 24, May, 2010 

Firmware Version: ver2.02WWb09 
Firmware Date: Mon, 24, May, 2010 
CheckSum: 0x07F60CCB		
Problems Resolved & Enhancements:
1. Removed USB 3G phone option.
2. Fixed 3G USB Adapter function can't work.
=======================================

Firmware: v2.02WW Build: 08
Hardware: B1
Date: 21, Apr, 2010 

Firmware Version: ver2.02WWb08 
Firmware Date: Wed, 21, Apr, 2010 
CheckSum: 0x07F5670F		
Problems Resolved & Enhancements:
1. Fixed Status-IPv6 page – LAN Computer IPv6 Address display issue
2. Fixed LAN PC in IPv6 PPPoE mode can’t access to IPv6 network.
3. Fixed IPv6 PPPoE page – LAN IPv6 Address field MUST NOT display 6to4 IPv6 Address by default
4. Fixed LAN IPv6 Address field MUST NOT allow user set 6to4 address
5. Fixed IPv6 PPPoE reconnect function – each connection mode MUST be work
6. Fixed Remote manage function MUST work for WAN IPv6 Address
7. Fixed 6to4 relay field MUST allow set IPv4 address and Domain Name
8. Fixed Subnet Prefix Length SHOULD verify more types. Example, /8, /16, /32, /48, /64, /72, /127, IPv6 Address SHOULD verify more types.
9. Updated firmware version to 2.02
=======================================

Firmware: v2.01WW Build: 07Beta02
Hardware: B1
Date: 19, Apr, 2010 

Firmware Version: ver2.01WWb07Beta02 
Firmware Date: Mon, 19, Apr, 2010 
CheckSum: 0x07F6A550		
Problems Resolved & Enhancements:
1. Fixed when user doesn't set schedule page and link to other option webpage, then pop warning message.
2. Fixed Qos(mbandwidth) send broadcast ICMP Echo Request.
=======================================

Firmware: v2.01WW Build: 07Beta01
Hardware: B1
Date: 14, Apr, 2010 

Firmware Version: ver2.01WWb07Beta01 
Firmware Date: Wed, 14, Apr, 2010 
CheckSum: 0x07F6596F		
Problems Resolved & Enhancements:
1. Fixed when user doesn't set schedule page and link to other option webpage, then pop warning message.
2. Fixed when setting wireless schedule, if schedule time has not arrived yet, the wireless radio should be off, but it's not.
3. Ipv6 clients can’t be shown in list of status.
4. 6in4 with dhcp-pd mode ,client pc can’t get IP from stateful lan mode.
5. When assign ipv6 over ipv4 mode dns should in dynamic mode as default mode.(ipv6_6in4_dns_enable=0)
6. Fixed log texts is too long to break table.
7. Fixed when 3G USB + PPTP Pass Through, PPTP Pass Through easily disconnect.
=======================================

Firmware: v2.01WW Build: 07
Hardware: B1
Date: 31, Mar, 2010 

Firmware Version: ver2.01WWb07 
Firmware Date: Mar, 31, Mar, 2010 
CheckSum: 0x07F552EF		
Problems Resolved & Enhancements:
1. Wireless Function. (Performance, IOT, Reliability, WPS)
2. DDNS (DynDNS) Function.
3. Enable check IPv6 DNS address.
4. Set IPv6_pppoe_mtu default value is 1492.
5. Disable check ipv6 wan proto on wan page.
6. Fixed PPPoEv6 Static IP is fail.
7. Fixed IPv6 6in4 don't work.
8. Fixed IPv6 Network Status: Modify the text "connect" to "connected".
9. Fixed when apply IPv6 6in4 and IPv6 6to4 will display warning message.
10. Fixed correcting the DHCP Reservation List of Expires misspelling, it should be "Never".
11. Removed if DHCP-PD is enabled, DNS server must be obtained automatically under this mode.
12. Merge 12/24 time format issue.
=======================================

Firmware: v2.01WW Build: 06Beta02
Hardware: B1
Date: 22, Mar, 2010 

Firmware Version: ver2.01WWb06Beta02 
Firmware Date: Mon, 22, Mar, 2010 
CheckSum: 0x07F4E9C7		
Problems Resolved & Enhancements:
1. Fixed Home Network Administration Protocol (HNAP) vulnerabilities.
=======================================

Firmware: v2.01WW Build: 06Beta01
Hardware: B1
Date: 02, Mar, 2010 

Firmware Version: ver2.01WWb06Beta01 
Firmware Date: Tue, 02, Mar, 2010 
CheckSum: 0x07F519A4		
	
Problems Resolved & Enhancements:
1. Fixed IOT issue with Singapore iBurst RJ45 modem in 10Half mode.
=======================================

Firmware: v2.01WW Build: 06
Hardware: B1
Date: 04, Feb, 2010 

Firmware Version: ver2.01WWb06 
Firmware Date: Thu, 04, Feb, 2010 
CheckSum: 0x07F42FBB		
	
Problems Resolved & Enhancements:
1.	Added 404 error spec v1.02.
2.	Support httpd ipv6.
3.	Support LLMNR support.
4.	Add WAN 3G phone option.
5.	Fixed doesn’t check WAN Physical netmask, gateway IP of Russia PPPoE.
6.	Fixed doesn’t check PPTP netmask IP address of Static Russia PPTP.
7.	Add 12/24 time format on schedule.
8.	Fixed 5GHz ? SSID is [dlink_media"'~!@#$%^&*'`~!@#$%` ], then Wireless Network Name of wireless network setting 5GHz is empty.
9.	Fixed 2.4G / 5G wireless bssid of main & guest_zone are the same.
=======================================

Firmware: v2.01WW Build: 05
Hardware: B1
Date: 28, Jan, 2010 

Firmware Version: ver2.01WWb05 
Firmware Date: Thu, 28, Jan, 2010 
CheckSum: 0x07F4F63A								
	
Problems Resolved & Enhancements:
1. Fixed #19: Website Filter function check warning message display incorrect language in Espanol.
2. Fixed #10: 5G Guest Zone will not display WPA-Enterprise settings.
3. Fixed #2: No check WAN Physical settings of Russia PPPoE.
4. Fixed #1: No check PPTP Gateway IP address of Static Russia PPTP.
5. Fixed #11: Change WAN Type settings cause Router reboot.
6. Fixed #7: Login account issue.
7. Added a feature for dlink 404 error spec v1.01.
=======================================

Firmware: v2.01WW Build: 04Beta01
Hardware: B1
Date: 20, Jan, 2010

Firmware Version: ver2.01WWb04Beta01 
Firmware Date: Wed, 20, Jan, 2010 
CheckSum: 0x07F4DFF9								
	
Problems Resolved & Enhancements:
1.	Fixed tcp port scan fail in port 0 and 1.
=======================================

Firmware: v2.01WW Build: 04
Hardware: B1
Date: 06, Jan, 2010

Firmware Version: ver2.01WWb04 
Firmware Date: Wed, 06, Jan, 2010 
CheckSum: 0x07F36607								
	
Problems Resolved & Enhancements:
1. Fixed PPPoE re-connect issue.
2. Fixed BT issue.
=======================================

Firmware: v2.01WW Build: 03Beta02
Hardware: B1
Date: 10, Dec, 2009

Firmware Version: ver2.01WWb03beta02 
Firmware Date: Thu, 10, Dec, 2009 
CheckSum: 0x07F4F4CC								
	
Problems Resolved & Enhancements:
1. Updated displaying 5 GHz wireless client list by xml.
2. Fixed GUI show allowed char for setting of hostname.
3. Fixed DIR-825_A1_v2.01-DCS-5220 and DCS-2120 failed to connect to DIR-825 VIA wireless connection.
=======================================

Firmware: v2.01WW Build: 03Beta01
Date: 1, Dec, 2009

Firmware Version: ver2.01WWb03beta01 
Firmware Date: Tue, 1, Dec, 2009 
CheckSum: 0x07F26F70									
	
Problems Resolved & Enhancements:
1. Login privilege will be changed by another user login.
2. Fixed GUI show allowed char for setting of hostname.
3. Fixed Channel Width 2040 won't saved when configured to 802.11n (Only on 5 GHz)
4. Fixed when add new schedule, wireless will use the newest schedule rule.
5. Fixed  Transmit power function does not work for 5 GHz.
=======================================

Firmware: v2.01WW Build: 03
Date: 20, Nov, 2009

Firmware Version: ver2.01WWb03 
Firmware Date: Fri, 20, Nov, 2009 
CheckSum: 0x07F30704									
	
Problems Resolved & Enhancements:
1. Fixed Transmit power function does not work.
2. Fixed Channel Width 2040 won't saved when configured to 802.11n (Only on 5GHz)
=======================================

Firmware: v2.01WW Build: 02
Hardware: B1
Date: 4, Nov, 2009

Firmware Version: ver2.01WWb02 
Firmware Date: Wed, 4, Nov, 2009 
	
Problems Resolved & Enhancements:
1. Support FQDN function.
2. Fixed GUI show allowed char for setting of hostname.
3. Fixed when use "user" account, it still can select language.
=======================================

Firmware: v2.01WW Build: 01
Hardware: B1
Date: 20, Oct, 2009

Firmware Version: ver2.01WWb01 
Firmware Date: Tue, 20, Oct, 2009 
CheckSum: 0x07F313C9										
	
Problems Resolved & Enhancements:

1. Update Kcode module. 
2. Support E220, DWA-152/156
3. DIR-825_B1_v2.00b12-May be flood issue.
4. Fixed Previous configured Port range is still valid to protocol of "Any".
5. Fixed when change computer name in DHCP reservation will occur error.
6. Fixed QoS priority range is 1 to 8, but the Qos help description page is 1~255.
7. Fixed No priority field on Status- Internet Sessions page for confirm Qos setting s priority.
8. Fixed when enable 3G USB adapter function, it should not access Qos Engine and Routing function pages.(Follow Ubicom)
9. Fixed QOS: Message wording error when the end port range value less than start port range in remote port range.
10. Fixed Access Control doesn't check rule name duplicate.( Protocol or Port duplicate follow Ubicom when Protocol="Any")
11. Fixed Behavior is different for IPv4 & IPv6 PING test.
12. Fixed https://aaa.bbb.ccc becomes https:/ after clicking save settings.
13. Fixed Set NetBIOS Scope to “abc,123”, setting CAN be saved but the announced NetBIOS scope becomes “abc”.
14. GUI admin/user behaviors. When use "user" account login, then web pages should be gray.
15. GUI Login Fail Alert Message for Dlink model (follow UbiCom)
16. Fixed Status->Device Info Page issue:
	Do not allow users to press the "connect" or "DHCP Renew" button after PPPoE/PPTP/L2TP/DHCP connection, and press the "disconnect" or " DHCP Release" button after PPPoE/PPTP/L2TP/DHCP disconnection.
17. Wireless domain for Russia: Modify Russia 5GHz channel list for Dlink Spec.
18. Fixed when change Router LAN IP and add DHCP reservation at the same time, the DHCP reservation rules can't be saved.
19. Fixed schedules rule can not be edit when the rule is used.
20. Fixed Inbound filter rule in use can not be edited.
21. Fixed website filtering rules do not work if the website URL/Domain is prefixed "http://" .Prefixed rules will disappear.
22. Fixed MAC address starting with 08:00:46:EE:D1:C8 won't be accepted. (MAC can not accept 08 at beginning).
23. Firmware version is 2.01WW
24. Disable graph_auth_enable in default.
=========================================================================

Firmware: v2.00WW Build: 12
Hardware: B1
Date: 15, May, 2009

Firmware Version: ver2.00WWb12 
Firmware Date: Fri, 15, May, 2009 
CheckSum: 0x07F0EA2E	
										
	
Problems Resolved & Enhancements:

1.Fixed TSD#38:The "Server name/IP" field for PPTP/L2TP and Russia PPTP/L2TP should avoid user to input illegal IP. Only Russia PPTP no check field.
2.Fixed TSD#35:When Enable "Turn MAC Filtering ON and ALLOW computers listed to access the network" function and no input any MAC Address rule, it should appear warning message. 
3.Fixed TSD#34:Help page don't need "BigPond Connection" description.
4.Fixed TSD#33:Help Page no have "Advanced DNS service" description.
5.Fixed TSD#32:Help Page does not have "Russia PPTP", "Russia PPPoE" and "3G USB Adapter" descriptions and titles. But no Russia PPTP/PPPoE Internet page help texts. Need PM to provide.
6.Close TSD#31:no texts file.-->Help Page no have "ROUTING" and "IPv6" descriptions and Hyper-Link Title. Need PM to provide.
7.Fixed TSD#30:Help Page no have "USB SETTINGS" description and Hyper-Link Title.
8.Fixed TSD#14:USB Settings Language description issue.
9.Add HTTPS option.
10.Hide Advanced DNS Option.
=========================================================================

Firmware: v2.00WW Build: 11
Hardware: B1
Date: 7, May, 2009

Firmware Version: ver2.00WWb11 
Firmware Date: Thu, 7, May, 2009 
CheckSum: 0x07F18EA2	
										
	
Problems Resolved & Enhancements:
1. Modify CONFIG_AG7100_LEN_PER_TX_DS=512
2. Support Mac Safari can display autograph pictures.
3. Support Advanced DNS.
4. Fixed the Time zone incorrect for Newfoundland that should be GMT -03:30
5. Support Schedule cannot over 24HR issue.
=========================================================================

Firmware: v2.00WW Build: 10
Hardware: B1
Date: 27, Apr, 2009

Firmware Version: ver2.00WWb10 
Firmware Date: Mon, 27, Apr, 2009 
CheckSum: 0x07F0BC5E	
										
	
Problems Resolved & Enhancements:
1. Fixed ISP's name issue in WAN 3G mode settings page, Chunghua-->Chunghwa.
2. Fixed BT issue.
3. Fixed igmp snooping.
=========================================================================

Firmware: v2.00WW Build: 09
Hardware: B1
Date: 2, Apr, 2009

Firmware Version: ver2.00WWb09 
Firmware Date: Thu, 2, Apr, 2009 
CheckSum: 0x7F3E8ED	
										
	
Problems Resolved & Enhancements:
1. Fixed Wireless client site survey will get none security when router set Channel Width auto(20/40) in wpa2-AES and WPS not disable..
2. Fixed Setting EAP does not warning messenger when WPS enable.
=========================================================================

Firmware: v2.00WW Build: 08
Hardware: B1
Date: 2, Apr, 2009

Firmware Version: ver2.00WWb08 
Firmware Date: Thu, 2, Apr, 2009 
CheckSum: 0x7F3CB03	
										
Problems Resolved & Enhancements:
1. Fixed #No.16- Network Filter warning message issue.
2. Fixed #No.11- password setting of WAN wizard can't keep issue.
3. Fixed #No.15 - When set QoS Priority over 1~ 8 ranges, and then click "Save Settings" button. It will appear the warning message, but click "OK" button that it change to saving windows page.
4. Fixed #No.20- Incorrect warning message when login.
5. Fixed #No.23- Email Now function fail on Language Espanol.
6. Fixed #No.6 - When DUT Internet type is Static IP, the pull-down menu display error.
=========================================================================

Firmware: v2.00WW Build: 07
Hardware: B1
Date: 27, Mar, 2009

Firmware Version: ver2.00WWb07 
Firmware Date: Fri, 27, Mar, 2009 
CheckSum: 0x7F315F8		
										
Problems Resolved & Enhancements:
1. Fixed #No.24- Firmware Help page error.
2. Verify #No.23- Email Now function fail on Language Espanol.
3. Verify #No.22- IPv6 - DHCPv6 Stateful failed at PPPoE Mode.
4. Verify #No.21- IPv6 Auto configuration menu error of 6 in 4 Tunnel Mode.
5. Verify #No.20- Incorrect warning message when login.
6. Fixed #No.18- 5G Guest WEP-128 bit Key issue
7. Fixed #No.17 - Status button display error
8. Fixed #No.15 - When set QoS Priority over 1~ 8 ranges, and then click "Save Settings" button. It will appear the warning message, but click "OK" button that it change to saving windows page.
9. Fixed #No.10 - Static IP settings of WAN wizard display location issue.
10. Verify #No.6 - When DUT Internet type is Static IP, the pull-down menu display error.
11. Verify #No.5 - Pop-up a Espanol warning message as below in English UI when the Virtural Server Port Setting conflict with Port Forwarding rules.
12.Fixed #No.2 - Change option to either one in drop-down menu then click save setting will occur a "Not thing changed" warning message.  If click "Yes" to continue, settings are saved and working properly. 
13. Verify #No.1 - 3G USB Adaptor display error.
14. Fixed #No.13 - PPPoE service name cause connection to Internet failed.
15. Fixed #No.12 - PPPoE service name can't display.
16. Support igmp snoopy function.
17. Modify the count down time is 40s when setting wan page.
=========================================================================

Firmware: v2.00WW Build: 06
Hardware: B1
Date: 23, Mar, 2009

Firmware Version: ver2.00WWb06 
Firmware Date: Mon, 23, Mar, 2009 
CheckSum: 0x7DFE535			
										
	
Problems Resolved & Enhancements:
1. Removed the WPS warning message when setting WPA-TKIP/AES.
=========================================================================

Firmware: v2.00WW Build: 05
Hardware: B1
Date: 23, Mar, 2009

Firmware Version: ver2.00WWb05 
Firmware Date: Mon, 23, Mar, 2009 
CheckSum: 0x7DFA8DB			
										
	
Problems Resolved & Enhancements:
1. Removed the WPS warning message when setting WPA-TKIP/AES.
2. Fixed USB 3G drop menu error.
3. Fixed Russia PPTP can't save.
4. Fixed Static Routing doesn't have wan physical.
5. Fixed Login pop warning message always display.
6. Fixed wording error on 802.11 n only.
7. Fixed the NAME of LAN Computers sometimes display empty on device information.
=========================================================================

Firmware: v2.00WW Build: 04
Hardware: B1
Date: 16, Mar, 2009

Firmware Version: ver2.00WWb04 
Firmware Date: Mon, 16, Mar, 2009 
CheckSum: 0x7E04CD4			
										
	
Problems Resolved & Enhancements:
1. Fixed sometimes on different config pages, the frames are a little bit too wide.
2. Fixed The DIR-825 shows its time as "NaN" or the time will not be changed regarding the set time zone, the DIR-825 shows the NTP time.
3. Fixed On this config page in wireless wizard there is a page error.
4. Fixed there is a page error when user try to change the Cipher Type to "TKIP and AES" on wireless setting.
5. Fixed when I configure an Access control rule there are three not named buttons.
6. Fixed WAN Port Speed to Auto 10/100/1000Mbps.
7. Remove "Transmission Rate" information of "Wireless" support page
8. Fixed Floating message error of "Schedule Rules List"(Both "Edit" and "Delete" are incorrect).
9. Fixed Button name error of Access Control.
10. Fixed UI message error of "Load configuration File" (Both messages for "Failed" and "Success" loading are disappeared.)
11. Remove GuestWPS, WISH option on st_device.asp.
12. Add USB 3G country and ISP drop menu.		
13. Fixed Configure the Router LAN IP to different IP subnet will not change the "DHCP IP range" IP subnet.
14. Fixed Russia mode when PPP/PPPoE does not connect to server, the status page should display physical IP.	
Detail          
15. Fixed status->routing show up disabled static routing rules.
16. Fixed: 802.11n only not support security WEP or TKIP
17. Fixed: 5G WEP/GuestZone default key display error.

=========================================================================
Firmware: v2.00WW Build: 03
Hardware: B1
Date: 26, Feb, 2009

Firmware Version: ver2.00WWb03
Firmware Date: Thu, 26, Feb, 2009 
CheckSum: 0x7DF5C8E			
										
	
Problems Resolved & Enhancements:

1. Fixed firmware query cannot download.
2. Removed the empty option on Web UI 5G channel list.
3. Add shareport option on usb setting.
4. Please verify Widget and Gadget.

=========================================================================

Firmware: v2.00WW Build: 02
Hardware: B1
Date: 26, Feb, 2009

Firmware Version: ver2.00WWb02 
Firmware Date: Thu, 26, Feb, 2009 
CheckSum: 0x7DD8416 		
										
	
Problems Resolved & Enhancements:

1. Fixed firmware query cannot download.
2. Fixed 3G warning message error.
3. Fixed change language error on status page.
4. Fixed DDNS cannot save Server Address.
5. Fixed language list error on login page.
6. Fixed some web pages display error when change language.
7. Fixed Russia mode when PPP/PPPoE does not connect to server, the status page should display physical IP.
8. Please verify Widget and Gadget.

=========================================================================

Firmware: v2.00WW Build: 01
Hardware: B1
Date: 20, Feb, 2009

Firmware Version: ver2.00EUb02 
Firmware Date: Fri, 20, Feb, 2009 
CheckSum: 0x7DDEF46

Problems Resolved & Enhancements:

1.First Release.