DSR1000-LED-MIB DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY, 
        NOTIFICATION-TYPE, OBJECT-TYPE 
                FROM SNMPv2-SMI
        DisplayString
                FROM SNMPv2-TC
        dsr1000 
                FROM DSR1000-MIB;

dsr1000LedModule MODULE-IDENTITY
   LAST-UPDATED "201101020700Z"       -- 1st February 2011
   ORGANIZATION "Dlink"
   CONTACT-INFO "
   Email: dlink-dsr-support@teamf1.com
   "
   DESCRIPTION
   "
    MIB module for reading status of different LED's and 
    port speed/link status of every ethernet port.
   "
   REVISION "201101020700Z"       -- 1st February 2011
   DESCRIPTION " Initial version"
   ::= { dsr1000 1 }

systemLed OBJECT-TYPE
  SYNTAX  INTEGER (0..3) 
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
          "The state of System LED
          0 - Led is Off
          1 - Led is On
          2 - Error"
  ::= {dsr1000LedModule 1}

usb1Led OBJECT-TYPE
  SYNTAX  INTEGER (0..2) 
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
          "The state of USB1 LED
          0 - Led is Off
          1 - Led is On
          2 - Error"
  ::= {dsr1000LedModule 2}

usb2Led OBJECT-TYPE
  SYNTAX  INTEGER (0..2) 
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
          "The state of USB2 LED
          0 - Led is Off
          1 - Led is On
          2 - Error"
  ::= {dsr1000LedModule 3}

lan1Status OBJECT-TYPE
  SYNTAX  INTEGER (0..100) 
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
          "The link state of LAN PORT 1 and the Port Speed.
           A two digit integer will be returned. The first digit
           will show the link activity as the following:
          1 - Link Down
          2 - Link Up
          3 - Error

          The second digit will show the port speed
          0 - 10   Mbps
          1 - 100  Mbps
          2 - 1000 Mbps
          3 - Error
          So a value of 21 will mean Link is Up and Port speed is
          100 Mbps"
  ::= {dsr1000LedModule 4}

lan2Status OBJECT-TYPE
  SYNTAX  INTEGER (0..100) 
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
          "The link state of LAN PORT 2 and the Port Speed.
           A two digit integer will be returned. The first digit
           will show the link activity as the following:
          1 - Link Down
          2 - Link Up
          3 - Error

          The second digit will show the port speed
          0 - 10   Mbps
          1 - 100  Mbps
          2 - 1000 Mbps
          3 - Error
          So a value of 21 will mean Link is Up and Port speed is
          100 Mbps"
  ::= {dsr1000LedModule 5}

lan3Status OBJECT-TYPE
  SYNTAX  INTEGER (0..100) 
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
          "The link state of LAN PORT 3 and the Port Speed.
           A two digit integer will be returned. The first digit
           will show the link activity as the following:
          1 - Link Down
          2 - Link Up
          3 - Error

          The second digit will show the port speed
          0 - 10   Mbps
          1 - 100  Mbps
          2 - 1000 Mbps
          3 - Error
          So a value of 21 will mean Link is Up and Port speed is
          100 Mbps"
  ::= {dsr1000LedModule 6}

lan4Status OBJECT-TYPE
  SYNTAX  INTEGER (0..100) 
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
          "The link state of LAN PORT 4 and the Port Speed.
           A two digit integer will be returned. The first digit
           will show the link activity as the following:
          1 - Link Down
          2 - Link Up
          3 - Error

          The second digit will show the port speed
          0 - 10   Mbps
          1 - 100  Mbps
          2 - 1000 Mbps
          3 - Error
          So a value of 21 will mean Link is Up and Port speed is
          100 Mbps"
  ::= {dsr1000LedModule 7}

wan1Status OBJECT-TYPE
  SYNTAX  INTEGER (0..100) 
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
          "The link state of WAN1 and the Port Speed.
           A two digit integer will be returned. The first digit
           will show the link activity as the following:
          1 - Link Down
          2 - Link Up
          3 - Error

          The second digit will show the port speed
          0 - 10   Mbps
          1 - 100  Mbps
          2 - 1000 Mbps
          3 - Error
          So a value of 21 will mean Link is Up and Port speed is
          100 Mbps"
  ::= {dsr1000LedModule 8}

wan2Status OBJECT-TYPE
  SYNTAX  INTEGER (0..100) 
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
          "The link state of WAN2 and the Port Speed.
           A two digit integer will be returned. The first digit
           will show the link activity as the following:
          1 - Link Down
          2 - Link Up
          3 - Error

          The second digit will show the port speed
          0 - 10   Mbps
          1 - 100  Mbps
          2 - 1000 Mbps
          3 - Error
          So a value of 21 will mean Link is Up and Port speed is
          100 Mbps"
  ::= {dsr1000LedModule 9}


END