Firmware Version 3.10 
Date Dec. 04, 2016

New Features
1. PPTP/L2TP VPN Client auto dial-in feature
2. Support User’s group and group’s privileges edit
3. Updated max number of wireless clients
4. Wireless IGMP Snooping support and Multicast to Unicast
6. OSPF support on L2TP over IPsec
7. Category filters for device logging
8. Support configurable IPsec backup policy
9. Support WCF 3-month trial license
10. Support multiple OpenVPN clients with the same certificate
11. Alerts via SMS for WAN/IPsec/CPU/RAM events
12. Support source port configuration for custom services
13. Multi-language support
14. Support Omni SSLVPN client
15. Select verified DDNS services:
a. DynDNS
b. D-Link DDNS
c. FreeDNS
d. NO-IP
e. 3322.org
f. Oray (existing in M7)
g. Custom

Problems Fixed
1. SQL injection Post authentication attack in Captive portal change password page.
2. WAN3 interface is unable in drop-down list of WAN interfaces on bandwidth profile page.
3. Unable to establish the SSL VPN tunnels in mac 10.6.8 host.
4. L2TP Over IPsec port option is not available in OSPF setting page.
5. Outbound firewall rule is not working for LAN to DMZ.
6. Unable to configure Static type and DHCP statefull on IPv6 WAN.
7. Unable to edit the subnet mask value in traffic selector page.
8. Unable to do default (factory default) from GUI.
9. Unable to detect the USB printer.
10. Unable to edit 2.4Ghz setting when WDS is enabled on 5Ghz radio
11. Able to establish WDS link even if the security modes are mismatched.
12. Still block URL even if blocked keyword is removed.
13. Unable to delete the users in specific case.
14. Unable to send logs to Gmail account from gmx sender mail address.
15. DSR PPTP Client doesn’t stay connected with Windows PPTP server.
16. VPN Pass-through is unstable.
17. glibc getaddrinfo stack-based buffer overflow.
18. Unable to Remote firmware upgrade through PPPoE WAN.
19. Support 64 characters for PPPoE password
20. Unable to set WAN port speed.
21. Configuration version is updated without a configuration change after reboot.
22. Unable to establish OpenVPN client tunnel with Access server.
23. Unable to select multiple port in custom service of inbound bandwidth profile.
24. Unable to support IPsec main mode for iPad/iPhone Cisco IPsec client.
25. Dashboard information incorrect.
26. NTP service is not working for customized NTP server.
27. Unable to run traffic if PPPoE with DHCPv6 option is disabled.
28. Unable run traffic over PPTP client tunnel in MAC OS.
29. Passwords in configuration file is in plain text.
30. Unable to support NFS.
31. Unable to edit DHCP Reserved IP entry.
32. Reboot logs contains username and password of the WAN PPPoE credentials.
33. Add display active private routes in "IPv4 routes table".
34. Remove MAC traffic selector Match type option when the bandwidth profile is configured for Inbound traffic.
35. Ping packets are going out without NAT IP when WAN is configured with PPPoE in WAN auto-rollover.
36. User group login Policies should be also applied for SSH.
37. Unable to login SSL VPN Portal when internal and external user is configured with same name.
38. The critical page display on VPN>SSL VPN>SSL VPN Server Policy.
39. Incorrect session entries on Active session page.
40. WAN is coming up, when clicked 'RENEW' button in WAN status page even though routing mode is configured as Transparent.
41. Unable to support FQDN Sever address for L2TP in WAN setting.
42. Unable to configure hash key (-) in PSK field for IPsec policies.
43. DHCP relay is not working over VLAN.
44. Support 32 bit mask for private static routes with destination as single IP.
45. DHCPv6 server is not giving lease to the clients who sent IAID as zero in request packet.
46. Application rule is still working even if the rule is disabled or deleted.
47. Unable to add second routing policy with same service at protocol binding.
48. Unable to show connected network printer on Windows7.
49. Error display on Wi-Fi schedule control.
50. UPnP device is not showing correct name in the host
51. Unable to continually play Audio stream from specific server.
52. Support PPPoE MSS auto-detect.
53. Deleting the conntrack entry of ICMP reply packet from WAN.
54. unable to ping 8.8.8.8 through L2TP/IPSec tunnel from Windows client.
55. Unable to add SNMP Access list for same IP with different community and privileges.
56. Adding Help content in “Aprroved Urls” page for approved URls priority is wrong.
57. Incorrect WAN link speed status in CLI 
58. Unable to configure PPTP client IP pool in LAN Subnet.
59. Unable to get IP using DWM-156 A3.
60. Showing wrong VLAN info.
61. DDNS status message is not displaying properly when there is symbol # in the password.
62. Unable to change 20Mhz to 80Mhz in 5Ghz radio setting.
63. Support 80Mhz channel spacing for Russia
64. Support 48 characters for email address.
65. “Off-path” TCP exploits.
66. Unable to send logs to Gmail account from gmx sender mail address.
67. CLI command to show port link speed is displaying port speed value even WAN link is down.
68. Unable to configure PPTP client IP pool in LAN Subnet.
69. Able to configure WAN mode in load balancing even when user configured configurable port as DMZ.
70. Unable to support full tunnel for remote L2TP over IPsec client 
71. Configuration is getting increased with reboot even without a configuration change.
72. 5G Channel display “frequency”, not “channel” in wireless status page.
73. Showing wrong VLAN info in the WebUI. 
74. DDNS status message is not displaying properly when there is symbol # in the password.
75. Sometimes device is getting crashed while changing radio settings frequently under wireless traffic.
76. Low throughput in NAT mode with PPPoE wan type.
77. 3G is not coming up after reboot.
78. Unable to add SNMP Access list with same IP, Subnet Mask and different community, privileges.
79. Maximum log entries are not reaching up to 1500 lines in GUI Page.
80. Help content in approved Urls page description for approved URls priority is wrong.
81. Unable to support DWM-157 B1