/*****************************************************************************/ Smart WLAN Manager utility Release Note /*****************************************************************************/ CVS Root:athena.cameo.com.tw:/share/service/cvs CVS Module:dept2/Others/Wireless Switch/DES-1228P/NMS/Wireless_switch_NMS_Vc6_project CVS installshield:dept2/Others/Wireless Switch/DES-1228P/NMS/NMS_installer-v2 1.10.06 for 1228p 20090407 Information: 1. Fixed the database compatiblity issue. 1.10.05 for 1228p 20090109 Information: 1. Fixed the spelling error in the dialog of saving new device(from "discoverd" to "discovered") 1.10.04 for 1228p 20081217 Information: 1. Add the "Web Access Password" under the "Confirm Password" for switch in smart console. 2. Modify the message to "the application is not available,try again please" if the smart console can not run. 3. The IP address in smart console can be show intact. 4. Fixed the auto channel can not be selected when start the ap configuration. 5. Add the "Verify Password" items on all of the password input page. 6. Add the polling for switch to get the current switch IP information. 7. Filter the error information that got from switch to avoid the topology error. 8. Increase the limit of data in database( 400000 counts for recorder_polling, 60000 counts for system_log). 1.10.03 for 1228p 20081201 Information: 1. When we start smartconsole on WLAN manager utility, the smart console can be limit and the WLAN manager do not show any residual image about smart consle. By the way, WLAN manager will show the full image but user can not work any function until user close the smat console. 2. Ignore the check of trap IP that have been hidden if the device is an ap. 1.10.02 for 1228p 20081031 Information: 1. In the "Modify System Key" dialog, the "Single Device" function can only work for switch 2. Add two function "Add to Managed AP" and "Modify System Key of All Managed Key Error APs" in list view, tree view, and topology view 3. Show information message to remind user remove the application of old version before install a new one bug 38 fixed bug 37 fixed, show message "Bind socket error". bug 36 fixed bug 34 fixed bug 29 show thw information message bug 27 fixed 1.10.01 for 1228p 20081021 Information: 1.Resolves smart console and wlan smartconsole automatically switching problem. bug 9 fixed. Set the administrator limits of authority for application. bug 22 the count of updating devices include the switches and APs if the switches string up each other. 1.10.00 for 1228p 20081013 Information: If we modify the system name of switch by smart console, the name which show in the WLAN manager is not change. The reason is that we do not work polling for switch configuration. bug 32 fixed bug 31 fixed bug 30 In order to synchronize the templete between database and fuction setting, it will show the global setting page after restoring the database. bug 28 fixed bug 27 fixed bug 26 Stop polling when user restore database bug 25 the error message is show in the action log bug 24 the error message is show in action log if getting failed in upgrading firmware bug 23 fixed bug 22 fixed bug 21 remove the firmware upgrade with switch bug 20 remove the password change function bug 19: remove trap bug 18 remove location BUG17: If the superG is set to dynamic mode, the channel will be set to '6', otherwise it will be set to auto selection when we doing the action with turning on or off the wireless radio. Utility will set the channel As the the above-mentione, user can not do any setting aout channel, the utility will set it automatically. bug 16 rename to default BUG14: Add the comapration with 'user limit'and 'WLANPartition' to show the icon int the group view. bug 13: fixed BUG12: The channel will be set to 'auto selection' when we change the superg from turbo dynamic to other modes. Bug 11 fixed bug 10 fixed bug 9 the OS issue, write in manual bug 8 fixed bug 7 remove the trap function if the device is AP bug 6 remove the password function bug 5 fixed bug 4 show enable if the device is AP bug 3 not a bug bug 2 fixed bug 1 remove firmware upgrade for switch 1.10.00 for 1228p DES1228P_NMS_2008_0826_0513.rar phase 2 1.add the muti floor in topology view, 2.integraed some CDP disovery function into discovery wizard 3.change the switch discovr utility to WLAN Smart Console Utility 4.firmware version check(AP, switch1.20.00, AP1.00.24) 5.database cleanup warning clean the log when systemlog>11000 warning the utiltlization when log>12000 6.AP firmware add full firmware and firmware version, the default value version 7.remove the switch firmware upgrade in WLAN Manager, WLAN Smart Console have the firmware upgrade bug fixed group setting wireless channel setting auto channel scan can't be saved dlink 1.00.11 for 1228p 2008/06/26 checkcode: 1bce setup.exe 1.00.11 2008_0626_0316 SmartWLANManager.exe 2008_0625_0241 1.fixed for unknown LLDP packet dlink 1.00.10 for 1228p, based on neutral version 1.00.09 [TSDBUG #6]fixed [TSDBUG #5]add the refresh function [TSDBUG #4]stop polling if seting ap configuration [TSDBUG #3]no issue [TSDBUG #2]fixed the replace function dlink 1.00.09 for 1228p, based on neutral version 1.00.08 1.Add WLAN partition function in ap configuration and group setting The cvs tag: NMS_1228P_1_00_09_960906 dlink 1.00.08 for 1228p, based on neutral version 1.00.07 1.There will be different channel rage for different country (distinguish from Domain ID) 2.Modify the channel range in wireless-page on Ap configuration setting function 3.Modify the channel range in wireless-page on group setting function 4.Add Message box if user does not select channel in group seeting The cvs tag: NMS_1228P_1_00_08_960731 dlink 1.00.07 for 1228p, based on neutral version 1.00.06 1.Correct the community issue on discovering 2.we can directly modify the community of ap which is in not-avirable state 3.Correct some issues on UI(save new device dialog and max polling thread in globle setting dialog) 4.The cvs tag: NMS_1228P_1_00_07_960709 dlink 1.00.06 for 1228p, based on neutral version 1.00.05 1.The cvs tag: NMS_1228P_1_00_06_96517 [TSDBUG #126]hold polling on clearing database [TSDBUG #124]please check again [TSDBUG #123]fixed [TSDBUG #122]fixed [TSDBUG #121]change to "Load background map" [TSDBUG #120]fixed [TSDBUG #119]fixed [TSDBUG #117]Anti-Rogue is only used for AP [TSDBUG #116]change "-1" to "0" [TSDBUG #115]fixed [TSDBUG #114]fixed [TSDBUG #113]fixed [TSDBUG #112]fixed, edit database rule [TSDBUG #111]fixed, check the discover community [TSDBUG #111]fixed [TSDBUG #110]fixed, check the discover ip range [TSDBUG #109]fixed [TSDBUG #108]fixed [TSDBUG #107]fixed [TSDBUG #106]fixed, edit the progress bar step [TSDBUG #104]fixed, add progress bar on apply system key for all devices [TSDBUG #101]fixed [TSDBUG #100]fixed [TSDBUG #99]fixed [TSDBUG #92]add error message if group setting error [TSDBUG #70]fixed [TSDBUG #24]add error message if group setting error dlink 1.00.05 for 1228p, based on neutral version 1.00.04 1.Hold polling thread on applying group template, upgrading firmware, and applying default value(on saving new device) in order to avoid the no repond issue of UI [TSDBUG #99]the future work in version 2 [TSDBUG #98]fixed [TSDBUG #97]fixed [TSDBUG #96]fixed [TSDBUG #95]fixed [TSDBUG #94]fixed [TSDBUG #93]Hold polling thread on upgrading firmware [TSDBUG #92]fixed [TSDBUG #91]fixed [TSDBUG #90]fixed [TSDBUG #86]fixed [TSDBUG #85]the future work in version 2 [TSDBUG #70]fixed [TSDBUG #65]show the dialog if snmp setting error [TSDBUG #62]it can be save to database now [TSDBUG #24]the future work in version 2 dlink 1.00.04 for 1228p, based on neutral version 1.00.03 [TSDBUG #92]fixed [TSDBUG #90]fixed [TSDBUG #89]fixed [TSDBUG #88]fixed [TSDBUG #87]fixed, limit user can select only one device to set configuration [TSDBUG #85]the future work in version 2 [TSDBUG #78]fixed by new switch firmware [TSDBUG #76]fixed, change "trunking" to "forwarding" [TSDBUG #70]fixed [TSDBUG #65]add error message if get error on group setting (the issue is caoused of the setting error) [TSDBUG #62]fixed, user can save to database now [TSDBUG #31]fixed, [TSDBUG #24]fixed, same to [TSDBUG #65] [TSDBUG #19]the sort function is not really necessary [TSDBUG #17]fixed, clear the count in the register dlink 1.00.03 for 1228p, based on neutral version 1.00.02 1.remove the login password from "admin" to null (requested from D-Link) 2. [TSDBUG #85]the switch donnot support two NICs [TSDBUG #84]fixed, it will reflesh after clearing database [TSDBUG #83]fixed, get the client number real-time [TSDBUG #82]fixed [TSDBUG #81]fixed, the system name int the firmware upgrad page is currect now [TSDBUG #80]fixed, set the range of the topology view [TSDBUG #79]fixed, increase the table length [TSDBUG #78]the issue is that get error information from switch [TSDBUG #76]fixed, we fixed [lnk] to [blocking] if the switches form loop [TSDBUG #75]fixed, [TSDBUG #74]fixed, reset the system name if a switch status from "unknown" to "normal" [TSDBUG #73]fixed [TSDBUG #72]fixed, currect the MIB value on setting [TSDBUG #71]fixed, the display issue [TSDBUG #70]fixed [TSDBUG #69]fixed [TSDBUG #68]fixed, we will delete all devices include the devices which is offline [TSDBUG #67]fixed, remove the unnecessary entry like WEP key value. [TSDBUG #66]fixed [TSDBUG #65]fixed [TSDBUG #63]fixed, [TSDBUG #62]fixed, the issue of setting mac filter in database [TSDBUG #61]fixed, show the default value in group setting page [TSDBUG #60]fixed, edit code of installshield 12 [TSDBUG #59]fixed, user can only select only one device now [TSDBUG #58]fixed, the same as BUG#59 [TSDBUG #57]fixed critical issue of database, filter the wrong mac of client which revcieved from APs [TSDBUG #54]fixed, user can only select one device to modify the configuration at the same time [TSDBUG #53]fixed, same as BUG 54 [TSDBUG #50]the picture will be change immediately after click "ok" button [TSDBUG #47]fixed [TSDBUG #46]fixed, Gmail need SSL, we donnot suppor it. We can send mail by hinet mail server now [TSDBUG #43]modify "WPAPassphase" to " WPA Passphase" [TSDBUG #38]fixed [TSDBUG #35]fixed, clear the log table if we clear database [TSDBUG #34]fixed [TSDBUG #33]fixed [TSDBUG #31]fixed, get system name of switch. If system name of switch is null, we allocat one to it [TSDBUG #24]fixed, the mac filter page issue [TSDBUG #11]fixed, edit code of installshield 12 96/2/12 dlink 1.00.02 for 1228p, based on neutral version 1.00.01 [TSDBUG #56]fixed. If a AP has been set super_G mode in a group , then we cannot modify its B/G mode in other group [TSDBUG #54]fixed, user can only select one device to modify the configuration at the same time [TSDBUG #53]same to BUG 54 [TSDBUG #52]fixed [TSDBUG #51]modify the MIB of B/G mode to "mixed" state if we set the super_G mode [TSDBUG #49]fixed, the display issue [TSDBUG #48]fixed [TSDBUG #47]fixed [TSDBUG #45]modify "Dest." to Destination [TSDBUG #44]remove the Expand and Collapse of menu on selecting AP in topology tree view [TSDBUG #43]modify "WPAPassphase" to " WPA Passphase" [TSDBUG #42]fixed [TSDBUG #41]fixed, the display issue [TSDBUG #40]fixed, delete string list if get space [TSDBUG #39]modify "0" to "Disable" and "1" to "Enable" [TSDBUG #38]fixed [TSDBUG #37]default WLAN Manager login password set to "admin". Mosify the database [TSDBUG #36]remove the port mapping button [TSDBUG #30]modify the misspelt word "cease" to "cause" [TSDBUG #29]reflash the group page after clearing database [TSDBUG #28]fixed. It can set now [TSDBUG #27]fixed. [TSDBUG #25]fixed. the display issue [TSDBUG #22]modify the default community to "private" on discovering 96/1/31 dlink 1.00.00 for 1228p, based on neutral version 1.00.00 1.update the "installshield_dev7" to "Installshield12" for vista 2.uninstall the past NMS(installshield_dev7) before reinstall [TSDBUG #21]fixed the crashed issue on setting load balance group [TSDBUG #17]the AP's name will start from AP_1 after clearing database [TSDBUG #16]shorten the time of modifing the database after set MIB [TSDBUG #14]fixed the crashed issue on discovering after clearing database [TSDBUG #13]the topology view range issue, fixed [TSDBUG #12]modify release utility version to 1.00.00 [TSDBUG #9]polling will restart if click the "start polling" button on polling time [TSDBUG #8]modify the rule of checking if ap is ready [TSDBUG #7]summary show fixed [TSDBUG #6]fixed [TSDBUG #5]fixed [TSDBUG #4]disable the polling after click cancel buttton [TSDBUG #3]replace a new database and add the database checking in source code [TSDBUG #2]the community : PRIVATE -> private [TSDBUG #1]fixed the issue that NMS cannot run in Microsoft Winxp SP2 En OS. 96/1/10 dlink 1.00.00 for 1228p, based on neutral version 1.00.00 1.changed the model field value at list view to DWL-3140AP 2.reduce topology layout initial position and length between device 3.change the icon to dlink icon and add dlink to product name 4.add LLDP enable/disabl at switch config disalbe LLDP will show warning if lldp disable, antirogue setting be disable 5.discover show system log when LLDP is disable. 6.save new add a apply default check box 7.delete switch will also delete AP 8.AP will not be found until attached at switch 9.client infor. show the history SSID, AP(not now) 10.add the polling thread numbers at global setting 95/12/20 neutral version 1.00.00 based on dlink 1228p 1.2.0 and neutral version 1.1.1 major changed 1.change version coding rule, x.x.x->x.xx.xx,1.00.00 2.remove the auto loadbalance function 3.merge loadbalance group/group 4.change polling progress bar 5.change some UI string 6.bug fixed total 90 bugs, 11 nab, fixed 79 bugs NMS 1.0.0 total 44 bugs, 6, NAB bug fixed [TSDBUG #20]modify system key error fixed [TSDBUG #26]AP modify senet tftp last packet modify firmware progress bar error [TSDBUG #30]smsart console fixed [TSDBUG #33]removed the refresh time [TSDBUG #35]removed the load balance group [TSDBUG #38]modify the polling paramater to avoide the data didn't consistent with APssid [TSDBUG #40]superg enable graey the mode [TSDBUG #41] add switch trap mib [TSDBUG #43]set AP system key will cause AP reboot, the set failed need restest NAB [TSDBUG #2,3,8,12,13,26]please see dlink email, dlink follow current design NMS 1.1.0 total 27 bugs, [TSDBUG #17]remove load balance, merge with group, when set load balance will force user enter related SSID, user number limit, security, MAC ACL [TSDBUG #18] same with 17 [TSDBUG #19] add IP field for reload [TSDBUG #20] fixed, [TSDBUG #23] fixed, [TSDBUG #27] remove the load balance NMS 1.1.1 total 19 bug 5 nab [TSDBUG #1] fixed [TSDBUG #2] remove the load balance function [TSDBUG #3] remove the load balance [TSDBUG #4] remove the load balance [TSDBUG #5] remove the load balance [TSDBUG #8] bug fixed [TSDBUG #11] bug fixed [TSDBUG #14] don't allow moved [TSDBUG #15] fixed [TSDBUG #16] remove the load balance function [TSDBUG #17] remove the load balance function [TSDBUG #18] remove the load balance function [TSDBUG #19] remove the load balance function NAB [TSDBUG #6] please check again, may be stil polling so saved file is less then display [TSDBUG #7] please try to scrolling [TSDBUG #8] please try to key in data [TSDBUG #12] don't support help [TSDBUG #13] this is windows application standrd behavior 95/10/31 NMS wlan1228p for dlink,1.2.0 new version for dlink, based on neutral version 1.1.1 function changed remove auto channel at preference BUG fixed NMS 1.0.0 [TSDBUG #15] auto layout for only database is empty before discovery wizard if overflow will seqential put the AP and switch if polling or second discovery.find new AP or any other network status changed, the AP and switch will put at top sequentially, don't move the exist AP or switch, if more one row,then change to next row, if there are AP or swtich at same location, please skip it. avoid to duplicate deivice at same device otherwise find new device will put at top NMS 1.1.1 [TSDBUG #9]mail host, check the mail format [TSDBUG #10]WPA problem, ap team have been modify ,submit new firmware NAB nms 1.0.0 [TSDBUG #33]it relate with polling time, if too many ap please delay the polling time [TSDBUG #36]don't need the interval [TSDBUG #27]only is load balance and not in load balance group ap can be set nms 1.1.0 [TSDBUG #8]AP name didn't save at AP, named by NMS [TSDBUG #24]the password have limit 20 character nms 1.1.1 [TSDBUG #5] delete from load balance the load balance function will be disalbe [TSDBUG #6]log and saved log is different order, but same content [TSDBUG #7] [TSDBUG #8]the log data is correct, the log file order order by time ascending, UI display desending by time [TSDBUG #12]about help tips, we don't support this function [TSDBUG #13]it is correct [TSDBUG #14]it is ok can't generate [TSDBUG #11]syslog can't send. tested at RD, it is ok Wireless Smart Switch release note 2006/9/28 nms 1.1.1 function update 1.change the mac format to 11:22:33:44:55:66 2.add tooltips to replace and change the double click to active the replace function BUG FIXED 1.0.0 [TSDBUG #1] disable 25-28 port antirogue UI [TSDBUG #4] add error handle [TSDBUG #5] add waring message [TSDBUG #6] remove location checking [TSDBUG #7]add progress bar [TSDBUG #9] remove snmp community field [TSDBUG #10] add host ip modify checking [TSDBUG #11]fixed by AP team [TSDBUG #14]fixed group name bug [TSDBUG #16]clear all log [TSDBUG #17]largest 2100 year [TSDBUG #18]add progress bar [TSDBUG #20]modify the MIB root by product at DB [TSDBUG #21]remove the IP begin from 0 [TSDBUG #22]fixed [TSDBUG #24]fixed [TSDBUG #27]preserve at least one field [TSDBUG #28]unification list,tree,topology reload function [TSDBUG #29]fixed [TSDBUG #32]block cursor to move out of boundary [TSDBUG #34]group delete [TSDBUG #37]show scroll bar when necessary [TSDBUG #42]add disable load balance [TSDBUG #44]show waring when necessargy nms 1.1.0 [TSDBUG #1] lost file [TSDBUG #2] lost file [TSDBUG #3] bug fixed [TSDBUG #4] remove the add/remobe item [TSDBUG #7]add check the reduent mac check [TSDBUG #10]add duplicate IP check, [TSDBUG #11]add boundary check, max 30 [TSDBUG #12]add boundary check, max 30 [TSDBUG #13]add boundary check, max 20 [TSDBUG #14]add boundary check, max 20 [TSDBUG #15]add boundary check, max 20 [TSDBUG #16]add boundary check, max 20 [TSDBUG #21]icon changed [TSDBUG #26]icon changed SPEC issue mms 1.0.0 [TSDBUG #2]monitor AP, do'nt show switch [TSDBUG #3]NMS supprt snmp, don't support CDP [TSDBUG #8]AP and NMS do'nt support CDP [TSDBUG #12]discover support one password for easy use [TSDBUG #13]for other VLAN AP already have unknown device [TSDBUG #23] show sucees at action log [TSDBUG #26]NMS don't support boot code level upgrade for AP [TSDBUG #43]set AP system key will cause AP reboot nms 1.1.0 [TSDBUG #17]load balance check the mac ACL [TSDBUG #18]check SSID when load balance enable nab nms 1.0.0 [TSDBUG #33]it relate with polling time, if too many ap please delay the polling time [TSDBUG #36]do'nt need the interval [TSDBUG #27]only is load balance and not in load balance group ap can be set nms 1.1.0 [TSDBUG #8]AP name did'nt save at AP, named by NMS [TSDBUG #24]the password have limit 20 character nms 1.1.1 [TSDBUG #5] delete from load balance the load balance function will be disalbe [TSDBUG #6]log and saved log is different order, but same content [TSDBUG #7]log different page can see data unfixed nms 1.0.0 [TSDBUG #15] auto layout for only database is empty before discovery wizard if overflow will seqential put the AP and switch if polling or second discovery.find new AP or any other network status changed, the AP and switch will put at top sequentially, do'nt move the exist AP or switch, if more one row,then change to next row, if there are AP or swtich at same location, please skip it. avoid to duplicate deivice at same device other wise find new device will put at top [TSDBUG #19]close UI after thread stop [TSDBUG #30]wait huse [TSDBUG #35]can't regenrate the bug [TSDBUG #41] wait tomas new MIB [TSDBUG #40]superg , spec need confirm [TSDBUG #19]can't regenrate the bug [TSDBUG #20]same IP will add check at ip modify and discover, config if have same IP show warning polling find duplicate IP show critical log nms 1.1.0 [TSDBUG #3] licence problem [TSDBUG #5] UI libary error, can't regrenate [TSDBUG #25]password special word support nms 1.1.1 [TSDBUG #1] duplicated switch for upgrade firmware [TSDBUG #4] do'nt change the management host [TSDBUG #9]mail host [TSDBUG #10]WPA problem TSD check [TSDBUG #25]discovery time too long [TSDBUG #31]smart console find switch too few [TSDBUG #39]load balance, channel red color [TSDBUG #38]ssid config change red color 1.1.0 [TSDBUG #6]MAC filter sync problem,can't generate [TSDBUG #8]same problem with bug 6, can't generate [TSDBUG #22]can't find need check two times [TSDBUG #23]check does IP change, the message show may be IP changed, check succes by ping the old IP nms 1.1.1 [TSDBUG #2] can't regenerate [TSDBUG #3] can't regenerate 9/26 nms 1.1.0 update the new requirement 1.chnage monitor list view default column 2.remove the AP and switch text and when mouse move over floating topology add modify background picture size and orientation 3.change utilization chart scale Remove the month scale and use integer scale 4. change the connection log Only show the connect and disconnect related information change the column order 5.change load balance help tips 6.AP configuration ACL change to text box 7.running state like skype 8.change UI style http://www.codejock.com 9.discovery change the tips 10. remove the password error state and spelling error 11.change left menu staic help text to tooltips 8/18 Smart Manger version 1.0.0 modify AP sysobjID unfication with private mib root modify load balance help tips New function 1.preference: syslog, email alert, autoshow local host 2. load balance 2.1 add location field, 2.2 SSID change message Function adjust and bug fixed 3.monitor double clict to acitve config dialogbox 4.smart switch discovery config error, due to for some virus and strange behavior application double click to active config dialogbox 5.polling active the load balance, show red color 7/24 Smart Manger version 0.99 1.integrated Smart console(smart switch utility) 2.add user login, user management 3.export pdf and CSV format utilization 5/17 Smart Manger version 0.903 a.monitor client, add more field b.system key ui c.password manager add quit button d.add menu fo system e.load balance group icon adjust f.antirogure setting UI g.SNMP libray bug about for hex string decoding problem h.support muti model include 1216/1224 model 2006/5/12 Smart Manager version 0.902 Smart Switch verison 4.00.12 Smart AP version 1.18 Build:0002 a.changed the ChassisId to MAC address b.discovery by lldp managemnet address c.new function, password changed function d.new function, antirogue e.new function, changed system key(for antirogue) f.utilization connection log ui changed