/*------------------------ Software Release Note --------------------------- * This document is the Standard Format for Software Release Note. * * * --------------------------------------------------------------------------- * Date Version Description Author * =========================================================================== * 2005/08/16 1.0 Initial Version Angus Yang * 2005/09/15 1.1 Add [FW-VER] for F3 TP Angus Yang * *----------------------------------------------------------------------------*/ ******************************************************************************* *[PRODUCT NAME] : D-Link DGS-1216T * ******************************************************************************* _______________________________________________________________________________ RELEASE VERSION : v4.21.B03 RELEASE DATE : 2009/11/17 RELEASE BY : George Huang _______________________________________________________________________________ [CHECK-CODE] : 7F11 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : athena:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-21-B03 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.21.B03 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- N/A Bug Fixed: ------------- 1. Fix the bug that user can not finish 802.1x authentication through Network Policy and Access Services in the Windows Server 2008 operating system. Known issues: ------------- N/A Changed: ------------- N/A Known issues: ------------- N/A _______________________________________________________________________________ RELEASE VERSION : v4.21.B02 RELEASE DATE : 2009/09/24 RELEASE BY : George Huang _______________________________________________________________________________ [CHECK-CODE] : AC8D [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : athena:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-21-B02 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.21.B02 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- N/A Bug Fixed: ------------- 1. Fix the bug that user can not do Web access from LAN-side if the IP settins is configured as DHCP mode but the DHCP server does not configure the default Gateway IP. 2. Fixed the issue about Asymmetric VLAN setting. The symptom is that MAC Address Table can not be reset to default settings when Asymmetric VLAN is changed from Enabled/Disabled to Disabled. 3. Add a workaround to handle the URL-encoded distributed over multiple packets for current poor HTTPD mechanism. 4. Fix the bug that Dynamic Forwarding Table can not display the MAC address for control PC. 5. Fix the bug that RADIUS packet contains wrong attribute values. 6. Fix the bug that can not acquire IP from DIR-655 router when DIR-655 enables the DHCP Reservation function. 7. Fix the bug that switch does not close Web sessions properly when user uses netcat tool to do TCP connection. 8. Fix the IGMP Multicast Group Leave issue.The symptom is that other IGMP clients can not receive any multicast group packets from multicast router when router just leaves one of the multicast group. (IGMP Client uses three multicast group: 239.192.134.90, 239.192.4.90 and 239.192.0.90) 9. Fix the bug that user can not resotre config file in Linux through Firefox v3.0.3/v3.5.3 browser. 10. Add the human error prevention for mirror target port check on trunk ports. Known issues: ------------- N/A Changed: ------------- N/A Known issues: ------------- N/A _______________________________________________________________________________ RELEASE VERSION : v4.21.J03 RELEASE DATE : 2009/06/02 RELEASE BY : Will Lin _______________________________________________________________________________ [CHECK-CODE] : 3B0C [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : athena:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-21-J03 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.21.J03 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- N/A Bug Fixed: ------------- 1. Fix WEB UI about SNMP display. When we try to delete SNMP community (Trap Community name) via Smart Wizard, we find the Web UI display warning message then we find the Smart Wizard SNMP setting page display error after we push continue button. It's doesn't redirect correct page. 2. Fix bug about setting SNMP community via MIB browser. We find the Private MIB SNMP community name use "create and wait", the result display active directly. When we try to delete then create again, we find another community also be deleted. 3. Fix bug about handle some special char. Ex : ~!@#$%&+_=*^ 4. Fix SNMP Web UI display script error. Known issues: ------------- N/A Changed: ------------- N/A Known issues: ------------- N/A _______________________________________________________________________________ RELEASE VERSION : v4.21.J02 RELEASE DATE : 2009/05/20 RELEASE BY : Will Lin _______________________________________________________________________________ [CHECK-CODE] : D868 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : athena:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-21-J02 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.21.J02 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- N/A Bug Fixed: ------------- N/A Known issues: ------------- N/A Changed: ------------- 1. According to the customization requeset of SNMP community from D-Link, Japan customer, let SNMP community can be added/deleted dynamically, not fixed entry. Known issues: ------------- N/A _______________________________________________________________________________ RELEASE VERSION : v4.21.01 RELEASE DATE : 2008/12/02 RELEASE BY : Jane Yeh _______________________________________________________________________________ [CHECK-CODE] : A776 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : athena:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-21-01 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.21.01 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- N/A Bug Fixed: ------------- 1. Fixed the bug that PING/Web access is fail when deleting VLAN on Asymmetric VLAN mode. Known issues: ------------- N/A Changed: ------------- N/A Known issues: ------------- N/A _______________________________________________________________________________ RELEASE VERSION : v4.21.00 RELEASE DATE : 2008/12/02 RELEASE BY : Jane Yeh _______________________________________________________________________________ [CHECK-CODE] : 5786 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : athena:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-21-00 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.21.00 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- N/A Bug Fixed: ------------- - 802.1x 1. Enable 802.1x and set Re-auth period to 25; enable STP. The control port can not connect to to the device. 2. Cannot block the 1x port after authentication fail. 3. The control port is authrized, unplug the port the status will remain in "Authrized" even after the pass the reauthrize period. 4. Fixed the 802.1x bug that switch is not able to authenticate clients. There is problem with 802.1X authentication. Users are able to do 802.1X authentication through switch in the beginning. But some of these users can not do 802.1X authentication again after few days. - other 1. Fixed the issue that switch can not forward AppleTalk Broadcast packet (DA is 09-00-07-ff-ff-ff). Known issues: ------------- N/A Changed: ------------- N/A Known issues: ------------- N/A _______________________________________________________________________________ RELEASE VERSION : v4.20.T14 RELEASE DATE : 2008/11/13 RELEASE BY : Jane Yeh _______________________________________________________________________________ [CHECK-CODE] : 684E [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : athena:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-20-T14 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.20.T14 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- N/A Bug Fixed: ------------- 1. Client behind some switches can not acquire IP from DHCP server. 2. Wrong checking on trunk member while setting port STP mode on WEB UI. Known issues: ------------- N/A Changed: ------------- N/A Known issues: ------------- N/A _______________________________________________________________________________ RELEASE VERSION : v4.20.14 RELEASE DATE : 2008/08/14 RELEASE BY : Jane Yeh _______________________________________________________________________________ [CHECK-CODE] : 1D93 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : athena:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-20-14 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.20.14 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- N/A Bug Fixed: ------------- 1. Cannot accquire IP from router DIR-655 if DIR-655's IP is also 192.168.0.1. 2. Management vlan does not work if users apply management VLAN to vlan group which exceeds the 32th vlan group. Known issues: ------------- N/A Changed: ------------- N/A Known issues: ------------- N/A _______________________________________________________________________________ RELEASE VERSION : v4.20.13 RELEASE DATE : 2008/06/13 RELEASE BY : Jane Yeh _______________________________________________________________________________ [CHECK-CODE] : 0E99 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : athena:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-20-13 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.20.13 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- N/A Changed: ------------- 1. Due to the lack of FLASH material. So add the FLASH driver support. - INTEL: JS28F160C3TC/JS28F160C3BC (2MB) JS28F320C3TC/JS28F320C3BC (4MB) Known issues: ------------- N/A Changed: ------------- N/A Known issues: ------------- N/A _______________________________________________________________________________ RELEASE VERSION : v4.20.12 RELEASE DATE : 2008/06/12 RELEASE BY : Jane Yeh _______________________________________________________________________________ [CHECK-CODE] : 2E46 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : athena:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-20-12 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.20.12 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- N/A Bug Fixed: ------------- 1. Fix the bug that switch cannot get IP from DHCP server on these DIR655/DIR615 router. Changed: ------------- N/A Known issues: ------------- N/A _______________________________________________________________________________ RELEASE VERSION : v4.20.11 RELEASE DATE : 2008/02/27 RELEASE BY : Jane Yeh _______________________________________________________________________________ [CHECK-CODE] : A97B [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : cvsserver:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-20-11 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.20.11 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- N/A Bug Fixed: ------------- 1.Fixed GUI issue for QOS Queuing mechanism. QOS can't change Queuing mechanism from Strict Priority to WRR. Changed: ------------- 1.Change GUI cable diagnostics description: a. Cable Length : <50 50~80 80~100 >100 N/A b. Change from "The maximum cable length is limited to 100 meters" to "The maximum cable length is limited to 130 meters". Known issues: ------------- N/A _______________________________________________________________________________ RELEASE VERSION : v4.20.10 RELEASE DATE : 2008/02/26 RELEASE BY : Jane Yeh _______________________________________________________________________________ [CHECK-CODE] : 32CC [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : cvsserver:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-20-10 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.20.10 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- N/A Bug Fixed: ------------- 1.Fix Cable diagnostics bug: *Reduce this time in 5 second when doing cable diagnostics. *Classify impedance mismatch as good cable and display the distance in cable length column instead of cable fault distance column. *if no cable plugs in switch side or the cable length is under 2m, please display "No Cable" in test result. 2.Revise the wrong title issue in Examples for Asymmeric VLAN web page. Changed: ------------- N/A _______________________________________________________________________________ RELEASE VERSION : v4.20.09 RELEASE DATE : 2008/01/23 RELEASE BY : Jane Yeh _______________________________________________________________________________ [CHECK-CODE] : 3931 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : cvsserver:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-20-09 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.20.09 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- Bug Fixed: ------------- [DGS-1224T TSDBUG 68] IEEE802.1p QoS Function error We find the IEEE802.1p default Queuing mechanism show strict priority, but test result is WRR Mode, we find test strict priority result OK after apply Queuing mechanism again. Changed: ------------- Known issues: ------------- Note: ------------- For D-Link Phase II Enhancement Requirement. Not Bug: ------------- _______________________________________________________________________________ RELEASE VERSION : v4.20.08 RELEASE DATE : 2008/01/23 RELEASE BY : Jane Yeh _______________________________________________________________________________ [CHECK-CODE] : B854 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : cvsserver:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-20-08 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.20.08 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- Bug Fixed: ------------- [DGS-1224T TSDBUG 63] The IEEE802.1p default Queuing mechanism error The IEEE802.1p default Queuing mechanism should be strict priority, but we find the IEEE802.1p default Queuing mechanism is WRR mode. [DGS-1224T TSDBUG 64] The IEEE802.1p strict priority function error We find theIEEE802.1p strict priority function error, test result is WRR mode. [DGS-1224T TSDBUG 65] IEEE802.1p QoS Function error If we change QoS mode from 802.1p to DSCP then change form DSCP to 802.1p, we find 802.1p QoS mode doesn't work. Changed: ------------- 1. Remove Priority column from Port Setting page to meet D-Link's request. Known issues: ------------- Note: ------------- For D-Link Phase II Enhancement Requirement. Not Bug: ------------- _______________________________________________________________________________ RELEASE VERSION : v4.20.07 RELEASE DATE : 2008/01/21 RELEASE BY : Jane Yeh _______________________________________________________________________________ [CHECK-CODE] : A5B7 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : cvsserver:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-20-07 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.20.07 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- Bug Fixed: ------------- On HW:Rev.E1: 1. Port Link status is wrong when power saving is disable. 2. Cable diagnostics issue: Cable Length always show N/A. Changed: ------------- Known issues: ------------- Note: ------------- For D-Link Phase II Enhancement Requirement. Not Bug: ------------- _______________________________________________________________________________ RELEASE VERSION : v4.20.06 RELEASE DATE : 2008/01/15 RELEASE BY : Jane Yeh _______________________________________________________________________________ [CHECK-CODE] : 6241 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : cvsserver:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-20-06 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.20.06 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- Bug Fixed: ------------- 1.Opera 9.2 In Qos, our setting is DSCP-WRR, but the initial Qos page is 802.1p. 2."igsVlanRouterPortList" value is wrong. 3."igsVlanRouterPortListTable" , the 'walk' value only show "igsVlanRouterPortListVlanId" 4.When there are 256 VLAN groups, IGMP Snooping VLAN state cannot be disabled. 5.When Querier State enable, Leave Time is 0, DUT leave time can not follow "(Robustness Variable-1)* Last member Query Interval+ Max respond time + Leave time" value to leave multicast group.( test it with mgen) 6.When Querier State enable, Leave Time is 0, pc send join -> leave -> join by mgen, DUT no respond.(CPU LED no action) 7.Fix the bug that switch sometimes returns the down status when periodically getting PHY link status. *Add semaphore in hwdrv.c, add workarround in psscfg.c. 8.System crashed when SNMP packet size exceeded the local pkt buffer. Changed: ------------- Known issues: ------------- Note: ------------- For D-Link Phase II Enhancement Requirement. Not Bug: ------------- _______________________________________________________________________________ RELEASE VERSION : v4.20.05 RELEASE DATE : 2008/01/07 RELEASE BY : Jane Yeh _______________________________________________________________________________ [CHECK-CODE] : BFA2 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : cvsserver:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-20-05 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.20.05 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- Bug Fixed: ------------- 1. When we enable IGMP function (IGMP Query state enable) and we repeat to set VLAN2 IGMP State to disable and enable, we find the device CPU no respond. 2. When we enable IGMP function (IGMP Query state enable) and we set one of the VLAN1 member to static router port and repeat to set VLAN2 IGMP State to disable and enable then host transmit IGMP report and leave packets to VLAN2 of the device, we find the device CPU no respond and System LED cannot blink. 3. We enable IGMP function (IGMP Query state enable) and we disable VLAN2 IGMP state, we find VLAN1 IGMP cannot transmit general query. 4. When there are 256 VLAN groups, IGMP Snooping VLAN state cannot be disabled. Changed: ------------- Known issues: ------------- Note: ------------- For D-Link Phase II Enhancement Requirement. Not Bug: ------------- _______________________________________________________________________________ RELEASE VERSION : v4.20.04 RELEASE DATE : 2007/12/26 RELEASE BY : Jane Yeh _______________________________________________________________________________ [CHECK-CODE] : 7F8C [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : cvsserver:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-20-04 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.20.04 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- 1. Add SNMP control interface for the following functions - Qos (802.1p and DSCP) - Trusted Host - Broadcast Storm Control - Jumbo frame - Safeguard - Powersaving 2. Add IGMP Query state - IGMP Query state enable: 1.DUT will send general query. 2.When DUT receive leave packets, DUT will send spcial Query and leave time must cost "(Robustness Variable-1)* Last member Query Interval+ Max respond time + Leave time" value to leave multicast group. - IGMP Query state disable: 1.DUT won't send general query. 2.When DUT receive leave packets, DUT won't send spcial Query and leave time just cost "IGMP Leave time" value to leave multicast group. Changed: ------------- Known issues: ------------- Not Bug: ------------- _______________________________________________________________________________ RELEASE VERSION : v4.20.03 RELEASE DATE : 2007/12/21 RELEASE BY : Jane Yeh _______________________________________________________________________________ [CHECK-CODE] : ED83 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : cvsserver:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-20-03 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.20.03 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- Changed: ------------- 1. Support running on both HW:Rev.D1 and HW:Rev.E1. Known issues: ------------- Note: ------------- _______________________________________________________________________________ RELEASE VERSION : v4.20.02 RELEASE DATE : 2007/11/19 RELEASE BY : Jane Yeh _______________________________________________________________________________ [CHECK-CODE] : C280 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : cvsserver:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-20-02 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.20.02 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- 1. Add DSCP based QoS function. 2. Close Auto VoIP Function. 3. To make LLDP/LACP packets passthrough. Bug Fixed: ------------- [DGS-1224T TSDBUG #02] IGMP Snooping We find the IGMP client host timeout cannot receive Special Query to confirm leave or not from the Switch. [DGS-1224T TSDBUG #22] Trusted Host warning message misspelt word. Please change "can not" to "cannot". (D-LINK request before) [DGS-1224T TSDBUG #26] Dynamic Forwarding Table search function error: If we transmit 1000 different MAC address to port1 of DUT continued then search the port1 forwarding, we find the Web UI no respond after search over 500 Mac address. [DGS-1224T TSDBUG #29] Sratic Mac auto learning message misspelt word We recommend "excluding" change to "Excluding. [DGS-1224T TSDBUG #30] Trusted Host If we set trusted host to 192.168.1.1/24 then we use 192.168.0.2/24 transmit arp to DUT, we still find the DUT respond to 192.168.0.2. [DGS-1224T TSDBUG #31] Trunk Fail over issue If two devices uplink to each other via trunk port (17~24) then we reboot two device and unplug trunk port17~21, we find just can discover one device. If we plug all trunk ports then discover device again, we find two device all can be discovered via smartconsole utility then we unplug port17~21 test result still OK! [DGS-1224T TSDBUG #32] SNMP dot1Bridge MIB issue We find the standard dot1Bridge MIB just support port1~20. [DGS-1224T TSDBUG #35] IGMP Snooping If port1~8 is VLAN1 member and port9~16 is VLAN2 member, we can transmit report paockets to VLAN2 port member from VLAN1 member with tag VID2. Normal packets cannot forward even with tag VID2 from VLAN1 to VLAN2. [DGS-1224T TSDBUG #37] IGMP Snooping We find the IGMP Snooping Robustness Variable Function no work. [DGS-1224T TSDBUG #38] IGMP Snooping We find IGMP Snooping Query Interval function no work. [DGS-1224T TSDBUG #39] IGMP Snooping We find IGMP Snooping Max response Time function no work. [DGS-1224T TSDBUG #40] IGMP Snooping We find IGMP Snooping Last Member Query Interval function no work. Changed: ------------- Known issues: ------------- Note: ------------- For D-Link Phase II Enhancement Requirement. _______________________________________________________________________________ RELEASE VERSION : v4.20.01 RELEASE DATE : 2007/09/05 RELEASE BY : Jane Yeh _______________________________________________________________________________ [CHECK-CODE] : 9785 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : cvsserver:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-20-01 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.20.01 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- 1. Asymmetric VLAN. Bug Fixed: ------------- 1. [DGS-1224T TSDBUG #01] Smart Wizard (Password Settings) function error If we change Switch Password to "~!@#$%^&*()_+", we will find the new password cannot login to Switch Web UI and System Name will be change to "6%28%29_%2B". 2. [DGS-1224T TSDBUG #03] Port Settings (Port Status issue) We find the port status show error.(If Port1~20 unlink, the port status show 10M Half link. If Port1~20 link to 100M Full then unlink, the port Status show 100M Half link) 3. [DGS-1224T TSDBUG #04] Login timeout page doesn't show problem. If the Switch Web UI login timeout then we select "SmartWizard", we cannot find login timeout page then WEB UI show login page. 4. [DGS-1224T TSDBUG #05] SNMP Trap Setting GUI error We find SNMP Trag setting Page GUI error. 5. [DGS-1224T TSDBUG #06] SNMP Community Name setting issue If we set SNMP Community Name to special character (i.e: !!!!!!!!!!!!!!!!!!!!), we find the Switch no respond after apply setting. 6. [DGS-1224T TSDBUG #07] Cable Diagnostic Function detect error If we detect port1 then detect port23 or port24 via Cable Diagnostic Function, we find the device no respond. 7. [DGS-1224T TSDBUG #08] Cable Diagnostic Function detect error If we detect port9 (Control PC Uplink Port) via Cable Diagnostic Function, we find the Cable Diagnostic no detect result. 8. [TSDBUG #10] Dynamic Forwarding Table search function error If we search Port dynamic forwarding table, we fine the Web Control UI auto logout. 9. [DGS-1224T TSDBUG #11] Spanning Tree Port Status show error If we disable all ports of the Switch STP Port Control, we find port21~24 Port Status show disable. (Port1~20 show forward) 10. [DGS-1224T TSDBUG #12] 802.1Q Management VLAN Setting issue If we create port1~8 to VID 4094 VLAN (VLAN Name:AAAAAAAAAAAAAAAAAAAA) then our control PC uplink to port1 and change VID 4094 VLAN Name to ",,,,,,,,,,,,,,,,,,,,", sometimes we find the Switch no respond after apply setting and select Management VLAN Setting. 11. [DGS-1224T TSDBUG #14] IGMP Snooping with VLAN setting issue If we create port17~24 to VID4094 (Not Management VLAN) and send 500 multi-groups report to the Switch from port17 then we delete VID4094 VLAN before multi-Group host-timeout, we find the Switch no respond. 12. [DGS-1224T TSDBUG #15] Login timeout page show problem in the Smart Wizard Page. We find Login timeout page show problem in the Smart Wizard Page. (Size asymmetric) 13. [DGS-1224T TSDBUG #21] Trusted Host Setting issue We find the same Host IP cannot be duplicated, but if we set the same IP Mask (i.e. 192.168.0.2/24 and 192.168.0.3/24) can be duplicated. 14. [DGS-1224T TSDBUG #23] IEEE802.1Q VLAN Setting issue If we create 257 VLAN groups (Over max VLAN groups setting), the Web UI doesn't show any warning message then we create VID 257 VLAN again, we find the Switch no respond. 15. [DGS-1224T TSDBUG #24] IGMP Function (VLAN State) Setting GUI issue If we create 256 VLAN Groups and eable IGMP Function then move VLAN Settings of IGMP Snooping table scoll bar, we find the VLAN State GUI show error. 16. [DGS-1224T TSDBUG #25] Mirror setting issue (After login timeout) If we enable mirror function then set port1 to Traget port and port2~24 to source ports (sniffer mode Both) then we wait Web UI login timeout, we find the swtich no respond. 17. [DGS-1224T TSDBUG #27] Cable Diagnostic Function detect error If we enable STP function of DUT, we find the cable diagnostic funciton no work. 18. [DGS-1224T TSDBUG #34] Cable Diagnostic Function detect error If we detect the authorized port cable, we find the cable diagnostic detect result fail. 19. [DGS-1224T TSDBUG #36] IGMP Snooping Robustness Variable default range fail We check the IGMP Snooping Robustness Variable default range is 2~255 not 1~255 and default value is 2. 20. [DGS-1224T TSDBUG #41] Trusted Host IP Setting range issue We find the trust host IP address cannot set to 223.x.x.x/24. 21. [DGS-1224T TSDBUG #42] Trusted Host function issue If we set trusted host to 192.168.1.1/24 then our control client IP address is 192.168.0.33/24 and 192.168.1.33/24, we cannot control the Switch. 22. [DGS-1224T TSDBUG #43] Cable Diagnostic Function detect error If we uplink two device via fiber port 24 then we detect port24 cable digonstic, we find the fiber port24 cannot link and device no respond. 23. [DGS-1224T TSDBUG #44] Auto VoIP Function issue We find Auto VoIP MGCP default Port just only support 2427. RFC 3435 * by the Call Agents, to the default MGCP port for gateways, 2427. * by the Gateways, to the default MGCP port for Call Agents, 2727. 24. [DGS-1224T TSDBUG #49] Auto VoIP QoS Priority describe error We find the VoIP Packets is highest priority not high priority, please modify the Auto VoIP describe. 25. [DGS-1224T TSDBUG #50] STP Protocol timers setting doesn't follow IEEE802.1d standard We can set Bridge Max age to 6 and Bridge Hollo Time to 10 sec that doesn't follow IEEE8201.d Standard. 26. [DGS-1224T TSDBUG #54] Spelling error: Shoud be "configure", not cinfigure. 27. [DGS-1224T TSDBUG #55] Smart Wizard Page show Problem. IP Setting warning message show problem in the Smart Wizard Page. (Size asymmetric) 28. [DGS-1224T TSDBUG #56] Logout warning message issue If we set Web UI timeout and Group Interval setting value to over range then we apply IP Info setting not System info, we still find the web show warning message. Changed: ------------- Known issues: ------------- Note: ------------- For D-Link Phase II Enhancement Requirement. _______________________________________________________________________________ RELEASE VERSION : v4.20.00 RELEASE DATE : 2007/08/02 RELEASE BY : Jane Yeh _______________________________________________________________________________ [CHECK-CODE] : 622E [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : cvsserver:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-20-00 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.20.00 [PLM-NO] : [N/A] _____________________________________________________________________________ New Features ------------- 1. Management VLAN. 2. STP, Edge, Disable modes for per port settings in Spanning Tree function. 3. Trusted Host. 4. Auto VoIP. 5. Cable Diagnoistic. 6. Power Saving on New PHY:(88E1240). 7. F/W upgrade/configuration in SNMP browser. 8. Hyperlink of D-Link support in banner. 9. Smart Wizard for the initial settings. 10.Refine wording about pop-up message. 11.Don't show the model name before logining GUI. 12.Update Device Information page with scroll bar style. Bug Fixed: ------------- 1. Back config time out issue. 2. Remote access control through Web GUI, and the URL only shows IP address instead of file path. 3. Static MAC function:If MAC Address which user key in all are random code, system will crash. 4. It must shows correct CPU status when uses SNMP brower, corrects the index info 64. 5. Remove the PHY diag from initialization in hwdrv.c. 6. Some MAC address in forwarding table cannot be search. 7. Fix the issue of host timeout not synchronous in IGMP Snooping. Macro define issue for IGS_VIDX_HASH_NUMBER, IGS_MCAST_FWD_TABLE_SIZE IGS_VIDX_HASH_NUMBER 256 for 28/52/28P IGS_VIDX_HASH_NUMBER 512 for 16/24/48 Changed: ------------- 1. SDK version update from v1.4.1 to v1.6.8. Known issues: ------------- Note: ------------- For D-Link Phase II Enhancement Requirement. _______________________________________________________________________________ RELEASE VERSION : RELEASE DATE : 2007/03/28 RELEASE BY : Kelvin Su _______________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [CVS] : -Root : cvsserver:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REV1-1-8 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.10.04B _____________________________________________________________________________ New Features ------------- Bug Fixed: ------------- Changed: ------------- Note: The following including functions be turn off but have not be verify: SYS_ASYM_VLAN_FUNCTION, SYS_MGT_VLAN_FUNCTION, SYS_BWCTRL_FUNCTION, SYS_STCTRL_FUNCTION, SYS_SRC_IPMAC_FUNCTION, SYS_RESET_BTN_FUNCTION, SYS_SYSLOG_FUNCTION, SYS_SNTP_FUNCTION, SYS_ACL_FUNCTION, SYS_CLI_FUNCTION, SYS_SMARTWIZARD_FUNCTION. Known issues: ------------- _______________________________________________________________________________ RELEASE VERSION : V4.10.06 RELEASE DATE : 2007/11/27 RELEASE BY : Jane Yeh _______________________________________________________________________________ [CHECK-CODE] : 4298 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : cvsserver:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-10-06 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.10.06 _____________________________________________________________________________ New Features ------------- Bug Fixed: ------------- 1.Fix issues in IGMP Snooping. - Send General Query by Query interval. - When leave message recieve, follow standard rule to send specific query packets. - Fix IGMP function enable that cause DUT ping no response. - If users utilize IGMP Snooping with the topology like or similar to Figure 1, the network may cause ping no response when router timeout. ______________ ___________ ___________ ______________ | | | | | | | | | Media Center |------| DUT1 |------| DUT2 |------| IGMP Host | |_____________ | |___________| |___________| |_____________| Figure 1. 2.Improve the performance of DISCOVERY/SNMP Trap. - Use SNMP Trap Settings or Trap Settings for SmartConsole, will cause delay of PING response. Now check port trap event (every time 4 ports) every 3 seconds. 3.Fix Logic in issue. - When log in the device control interface in web browser , then reset device and refresh web browser. User won't need password to log in the web. 4.Fix the LED shut down bug. *Function HW_SetBcastCtrl_Rate in hwdrv.c, a variable is not initiated. Changed: ------------- Known issues: ------------- _______________________________________________________________________________ RELEASE VERSION : V4.10.05 RELEASE DATE : 2007/11/06 RELEASE BY : Jane Yeh _______________________________________________________________________________ [CHECK-CODE] : D7BD [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : cvsserver:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-10-05 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.10.05 _____________________________________________________________________________ New Features ------------- Bug Fixed: ------------- - Fix issues in IGMP Snooping. 1.Send General Query by Query interval. 2.When leave message recieve, follow standard rule to send specific query packets. 3.Fix IGMP function enable that cause DUT ping no response. Changed: ------------- Known issues: ------------- _______________________________________________________________________________ RELEASE VERSION : V4.10.04 RELEASE DATE : 2007/10/15 RELEASE BY : Jane Yeh _______________________________________________________________________________ [CHECK-CODE] : 5895 [CHECKSUM] : [N/A] [PART-NO] : [N/A] [CVS] : -Root : cvsserver:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-10-04 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.10.04 _____________________________________________________________________________ New Features ------------- Bug Fixed: ------------- Resolution over 1280*1024 on VLAN page. Changed: ------------- Known issues: ------------- _______________________________________________________________________________ RELEASE VERSION : RELEASE DATE : 2007/03/28 RELEASE BY : Kelvin Su _______________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [CVS] : -Root : cvsserver:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REV1-1-8 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.10.04B _____________________________________________________________________________ New Features ------------- Bug Fixed: ------------- Changed: ------------- Note: The following including functions be turn off but have not be verify: SYS_ASYM_VLAN_FUNCTION, SYS_MGT_VLAN_FUNCTION, SYS_BWCTRL_FUNCTION, SYS_STCTRL_FUNCTION, SYS_SRC_IPMAC_FUNCTION, SYS_RESET_BTN_FUNCTION, SYS_SYSLOG_FUNCTION, SYS_SNTP_FUNCTION, SYS_ACL_FUNCTION, SYS_CLI_FUNCTION, SYS_SMARTWIZARD_FUNCTION. Known issues: ------------- _______________________________________________________________________________ RELEASE VERSION : V4.10.03 RELEASE DATE : 2007/03/14 RELEASE BY : Kelvin Su _______________________________________________________________________________ [CHECK-CODE] : [CHECKSUM] : [N/A] [PART-NO] : [CVS] : -Root : cvsserver:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-10-03 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : v4.10.03 _____________________________________________________________________________ New Features ------------- Bug Fixed: ------------- 1. If we use some Mac address type (ie: 0015e97cac08) transmit to the device and we cannot find this Mac address via Web UI Dynamic forwarding table search page. Changed: ------------- Known issues: ------------- _______________________________________________________________________________ RELEASE VERSION : 4.10.02 RELEASE DATE : 2006/12/04 RELEASE BY : Kelvin Su _______________________________________________________________________________ [CHECK-CODE] : EEDF [CHECKSUM] : [N/A] [PART-NO] : 1251DS1216T600D, 1251DS1216T600E [CVS] : -Root : cvsserver:/WSS -Module : platform/dgs1216t -TAG : DGS1216T-REL4-10-02 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : [N/A] _____________________________________________________________________________ New Features ------------- Bug Fixed: ------------- 1. In Web UI 802.1x Setting, the iframe tag is in the wrong position. 2. In Web UI QoS Setting, the description tip cannot show correctly in Opera Browser (version 9.01). 3. Fix device crash issue(OS issue). 4. [TSDBUG #1] If we upgrade firmware fail and goto loader mode then we upgrade firmware again in loader mode, we can find the smartconsole utility cannot find the device and upgrade firmware fail. 5. [TSDBUG #4] In ¡§IGMP¡¨ testing, it¡¦s failed when the Ghost clients join to the Ghost server with IGMP packets, just only one Ghost client can be joined to the Ghost server. 6. [TSDBUG #5] DGS-1216T Rev.D1 and DGS-1216T Rev.C1 SNMP MIB File Module Name are the same. If we compiler the mib files, they cannot coexist. 7. [TSDBUG #6] If we uplink port1 of the device1 to smartbit and uplink port24 (Trunk port) to device2 (enable spanning function), then we search port1 of device1, we can search the device2 Mac address in port1 forwarding table. 8. [TSDBUG #8] OPERA Brower show error in the 802.1x function page. 9. [TSDBUG #9] The SNMP community string can't input "#" characters. The Web Smart Swith doesn't have this issue! 10. [Errata] Switch work abnormally with System LED stop blinking. 11. [DGS-1216T BUG #148] In "Port setting" testing, if we set fiber port as Force mode, it still can link with another fiber port which as Auto mode. (PS: if let port link-down then link-up, it will be ok.) 12. [DGS-1216T BUG #149] In "Port setting" testing, if we set fiber port from Force mode to Disable Mode, it still can link with another fiber port which as Force mode. 13. [DGS-1216T BUG #174] In "IGMP" testing, it has applicaiotn issue with Trunk that it can't change the Trunk Port of IGMP Join to other Trunk member after member port unlink. 14. [DGS-1216T BUG #195] In "IGMP" testing, if two Switchs use trunk port(untag port) uplink to send report packet from one switch to another, confirming two Switchs have joined then send Leave packet form joined client, we will see just only one switch can Leave, another switch cannot Leave unless waiting for Host timeout. 15. [DGS-1216T BUG #199] In "SmartConsole Utility Firmware upgrade" testing, it will pop up triple error message continuously when upgrade wrong firmware in load mode. 16. [DGS-1216T BUG #248] In ¡§IGMP¡¨ testing, it¡¦s failed when the Ghost clients join to the Ghost server with IGMP packets, just only one Ghost client can be joined to the Ghost server. 17. [DGS-1216T BUG #249] In ¡§IGMP¡¨ Testing, if the IGMP VLAN status function disable then enable, we can find the group interval cannot join to the IGMP Multi-Group. 18. [DGS-1216T BUG #250] In ¡§Trap Setting¡¨ Testing, if disables the Trap Setting; we can find the snmp trap setting will be diable too. 19.[DGS-1216T BUG #251] In the Web UI ¡§Safeguard Engine¡¨ test, We find the Safeguard Engine Function doesn¡¦t work in the Safeguard Engine Test after 20 minutes. 20.[DGS-1216T BUG #252] In the Web UI ¡§802.1x Function¡¨ test, We find the ¡§Authentivation Port¡¨ input range cannot set to ¡§65535¡¨. 21.[DGS-1216T BUG #253] In the Web UI ¡§802.1x Function¡¨ test, We find the ¡§ReAuthPeriod¡¨ input range cannot set to ¡§4297967295¡¨. 22.[DGS-1216T BUG #254] In the Web UI ¡§802.1x Function¡¨ test, If the ¡§Redius Server IP Address¡¨ input ¡§0.0.1.0¡¨, web UI doesn¡¦t show warning message. 23.[DGS-1216T BUG #255] In the Web UI ¡§IGMP Function¡¨ test, If disable safeguard function of the device and join 100 IGMP Multi-groups, we can find sometime the web UI of the device cannot respond when click the view IGMP Multicast group table. 24.[DGS-1216T BUG #256] In the Web UI ¡§Trunk¡¨ test, if we set port1~4 to the trunk1 member, we can remove the port1~4 form all VLANs of the device. 25.[DGS-1216T BUG #257] If we setting function (DHCP refresh) of the device finish then reboot the device, we can find the device factory reset to default setting or Mac address of the device change to other Mac address. 26.[DGS-1216T BUG #258] If we enable IGMP Function and send discovery packet form smartconsole, we can find the trunk group will loop. (PS:it will be find when trunk member are not continuous.) 27.[DGS-1216T BUG #259] If two devices uplink with tag port and enable spanning then create other VID VLANs, we cannot discovery all devices in other VLANs. 28.[DGS-1248T BUG #7] In the Web UI ¡§Spanning Tree¡¨ test, if we enable spanning tree and the Trunk member of the device fail over, we can find the device change Trunk member port cost 30 sec. 29.[DGS-1248T BUG #8] In the Web UI ¡§Spanning Tree¡¨ test, if we enable spanning tree, we can find the device have loop problem after the Trunk member of the device fail over. 30.[DGS-1248T BUG #30] In "Forwarding Table" testing, if port1 mirror function enable, we can find VID=0 Mac address in the port1 forwarding table. 31.[DGS-1248T BUG #32] In "NETWORKVIEW Search Device Test", if we search the device information with Networkview software, we cannot ping the device after 5 minute. 32.[DGS-1248T BUG #33] In the Static Mac Function Test, if we add the same static mac form dynamic forwarding table, we can find the web doesn¡¦t show warnning message. 33.[DGS-1248T BUG #37] If we brower Web smart2 web UI then brower Web Smart Web UI, we cannot find function tool bar. 34.[DGS-1248T BUG #50] In ¡§system setting" test, if we set IP Address 128.0.0.1 with web brower, we find cannot set this ip address to device. 35.[DGS-1248T BUG #51] If we cancel firmware upgrade when firmware upgrades to 80%, then we set Configuration twice, we can find the smartconsole utility show warnning message. 36.[DGS-1248T BUG #60] In the IGMP Funciton Test, if we enable IGMP functuion and send report packets to the another device with combo copper ports and we send multicast media packets then change combo copper port to fiber port, we can find the fiber port cannot forward media frames. 37.[DGS-1248T BUG #63] In theTrunk Function Test, If two devices uplink with trunk ports then transmit BPDU Packets, we can find the trunk group (13~16) loop. 38.[DGS-1248T BUG #68] In the 802.1x Function Test, If we enable 802.1x function and set port control status enable then we disable the 802.1x function with SNMP, we can find the 802.1x port control status stil enable. 39.[DGS-1248T BUG #69] In the 802.1x Function Test, If we unplug and plug the radius server port, we can find the client cannot authorize form the radius server. 40.[DGS-1248T BUG #71] In the Web Brower Test, we can the SNMP, QoS and Dynamic Forwarding Table function page UI display error with Opera Brower V8.53. (current solution: for Dynamic Forwarding Table, recommend user to set Opera Brower to always refresh.) 41.[DGS-1248T BUG #72] In the IGMP Function MOD Test, if we reboot the device, we can find the IGMP leave time setting doesn¡¦t work. 42.[DGS-1248T BUG #73] In the 802.1x web UI confirm "key" check function fail. Changed: ------------- 1. Firmware upgrade rule be changed to check board config header. 2. Changed MIB OID from 1(dgs-1216t) to 4(dgs-1216td1). Known issues: ------------- 1. [TSDBUG #10] In "Trunk" testing, it cannot detect Dynamic forwarding table of Trunk port. (i.e. if we use Smartbit to test, it cannot be detect. But it will show correctly when testing in normal network environment.) 2. [TSDBUG #11] In "Forwarding Table" testing, table size is 16k, it's different with 8k in data sheet. (Chip vender had provided the errata) 3. [TSDBUG #12] In "Trunk" (Enable Flow Control) testing, it will loss packets critically. Max loss rate: 39.7%. 4. [TSDBUG #13] In "Mirror" (Enable Flow Control) testing, it will loss packets critically when mirror both. Max loss rate: 41.6%. 5. [TSDBUG #14] There are packets loss problem in the Many to One Flow Control Test. Max loss rate: 50%, Packet size:Random or Short. 6. [TSDBUG #15] In "QoS" testing, sending packet rate is random in the same queue. 7. [TSDBUG #16] In "Braodcast storm" testing, the broadcast storm control rate is incorrect if sending packet size isn't 64bytes(i.e. short packet size). 8. [TSDBUG #2] In "Port setting" testing, if we set fiber port from Force mode to Disable Mode, it still can link with another fiber port which as Force mode. 9. [TSDBUG #17] In "Dynamic Forwarding Table Search" testing, some ports cannot show MAC Address which already learned. 10.[TSDBUG #18] In "Static MAC" testing, static MAC cannot be changed dynamically in the Trunk member ports. 11.[TSDBUG #19] In "Spanning" testing, spanning port state cannot show correctly at link/unlink. Situation 1: Spanning tree port state still show "Forward" after port unlink. Situation 2: Spanning tree port state still show "Disable" after port link up. But if let port link-down then link-up, it will be ok. (i.e. the hardware issue waiting for recognition, this version don't solve.) 12.[TSDBUG #20] In "Firmware and Config Backup" testing, we'll see Open file button. (i.e. it's a default download object in IE browser, we can not change it.) 13.[TSDBUG #21] In "Firmware and Config Backup" testing, Firmware and Config File cannot be saved if waiting time is too long (over 5-10 sec. approximately), when we want to save Config File Name and select the saved path. 14.[TSDBUG #3] In "IGMP" testing, if two Switchs use trunk port(untag port) uplink to send report packet from one switch to another, confirming two Switchs have joined then send Leave packet form joined client, we will see just only one switch can Leave, another switch cannot Leave unless waiting for Host timeout. 15.[TSDBUG #7] STP Protocol timers setting doesn't follow IEEE802.1d standard. Note: Item 1., ...8. are chip limitation, Item 9., ... 15. are software limitation that will not be fixed in near version. _______________________________________________________________________________ RELEASE VERSION : V4.00.12 RELEASE DATE : 2006/05/24 RELEASE BY : Kelvin Su _______________________________________________________________________________ [CHECK-CODE] : F892 [CHECKSUM] : [N/A] [PART-NO] : 1251DS1216T600C [CVS] : -Root : \\sdserver\SW-Project\cvsroot\Cvs\FW -Module : Websm_SW\Marvell_98DX163\D-Link\DGS1216T -TAG : rel-4-00-12 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : [N/A] _____________________________________________________________________________ New Features: ------------- 1.None Bug Fixed: ------------- 1.None Changed: ------------- 1.None Known issues: ------------- 1. [TSDBUG #174] In "Trunk" (Enable Flow Control) testing, it will loss packets critically. Max loss rate: 39.7%. 2. [TSDBUG #215] In "Mirror" (Enable Flow Control) testing, it will loss packets critically when mirror both. Max loss rate: 39.7%. 3. [TSDBUG #151] In "Port setting" testing, if we set fiber port as Force mode, it still can link with another fiber port which as Auto mode. (PS: if let port link-down then link-up, it will be ok.) 4. [TSDBUG #152] In "Port setting" testing, if we set fiber port from Force mode to Disable Mode, it still can link with another fiber port which as Force mode. 5. [TSDBUG #168] In "Forwarding Table" testing, table size is 16k, it's different with 8k in data sheet. (Chip vender had provided the errata) 6. [TSDBUG #150] In "Trunk" testing, it cannot detect Dynamic forwarding table of Trunk port. (i.e. if we use Smartbit to test, it cannot be detect. But it will show correctly when testing in normal network environment.) 7. [TSDBUG #238] In "Many to one" testing, it will has loss packets with the packet size: Random or Short. 8. [TSDBUG #98] In "Dynamic Forwarding Table Search" testing, some ports cannot show MAC Address which already learned. 9. [TSDBUG #106] In "Static MAC" testing, static MAC cannot be changed dynamically in the Trunk member ports. 10. [TSDBUG #179] In "Spanning" testing, spanning port state cannot show correctly at link/unlink. Situation 1: Spanning tree port state still show "Forward" after port unlink. Situation 2: Spanning tree port state still show "Disable" after port link up. But if let port link-down then link-up, it will be ok. (i.e. the hardware issue waiting for recognition, this version don't solve.) 11. [TSDBUG #202] In "SmartConsole Utility Firmware upgrade" testing, it will pop up triple error message continuously when upgrade wrong firmware in load mode. (i.e. image file has be released, so this version don't solve currently.) 12. [TSDBUG #177] In "IGMP" testing, it has applicaiotn issue with Trunk that it can't change the Trunk Port of IGMP Join to other Trunk member after member port unlink. 13. [TSDBUG #198] In "IGMP" testing, if two Switch use trunk port(untag port) uplink to send report packet from one switch to another, confirming two Switch has Joined then send Leave packet, we will see just only one switch can Leave, another switch cannot Leave unless waiting for Host timeout. 14. [TSDBUG #231] In "Firmware and Config Backup" testing, we'll see Open file button. (i.e. it's a default download object in IE browser, we can not change it.) 15. [TSDBUG #232] In "Firmware and Config Backup" testing, Firmware and Config File cannot be saved if waiting time is too long (over 5-10 sec. approximately), when we want to save Config File Name and select the saved path. 16. [TSDBUG #240] In "Braodcast storm" testing, the broadcast storm control rate is incorrect if sending packet size isn't 64bytes(i.e. short packet size). 17. [TSDBUG #239] In "QoS" testing, sending packet rate is random in the same queue. 18. [TSDBUG #252] In "IGMP" testing, it's sometimes failed when Ghost clients join to Ghost server with IGMP packets, only one Ghost client can be joined to Ghost server. But sometimes it's OK to join two clients to Ghost server. Note: Item #1, 2, ...7, #16, #17 are chip limitation, Item #8, 12, ...15, #18 are software limitation that will not be fixed in near version. _______________________________________________________________________________ RELEASE VERSION : V4.00.07 RELEASE DATE : 2006/03/21 RELEASE BY : Kelvin Su _______________________________________________________________________________ [CHECK-CODE] : E8A7 [CHECKSUM] : [N/A] [PART-NO] : 1251DS1216T600A [CVS] : -Root : \\sdserver\SW-Project\cvsroot\Cvs\FW -Module : Websm_SW\Marvell_98DX163\D-Link\DGS1216T -TAG : rel-4-00-07 [TMPL-VER] : [N/A] [ECN-NO] : [N/A] [TP-TIME] : [N/A] [FW-VER] : [N/A] _____________________________________________________________________________ New Features: ------------- 1.None Bug Fixed: ------------- 1.None Changed: ------------- 1.None Known issues: ------------- 1. In "IEEE802.1p QoS" (Enable Flow Control) testing, transmission rate is incorrect. 2. In "Trunk" (Enable Flow Control) testing, it will loss packets critically. Max loss rate: 39.7%. 3. In "Mirror" (Enable Flow Control) testing, it will loss packets critically when mirror both. Max loss rate: 39.7%. 4. In "Port setting" testing, if we set fiber port as Force mode, it still can link with another fiber port which as Auto mode. (PS: if let port link-down then link-up, it will be ok.) 5. In "Port setting" testing, if we set fiber port from Force mode to Disable Mode, it still can link with another fiber port which as Force mode. 6. In "Port Setting" testing, Switch cannot link after set Port speed from 10M Force Mode to 100M Force Mode. But if let port link-down then link-up, it will be ok. 7. In "Qos" testing, the transmission ratio is 1:2:3:4, not 1:2:4:8, when we send a tagged packet which priority as 1,0,4,6. 8. In "Forwarding Table" testing, table size is 16k, it's different with 8k in data sheet. 9. In "Dynamic Forwarding Table Search" testing, some ports cannot show MAC Address which already learned. 10. In "Static MAC" testing, static MAC cannot be changed dynamically in the Trunk member ports. 11. In "Static Mac" testing, if we deleted last Static Mac item, it will show error message. It cannot support to delete last Static Mac item. 12. In "Trunk" testing, it cannot detect Dynamic forwarding table of Trunk port. 13. In "Spanning" testing, spanning port state cannot show correctly at link/unlink. Situation 1: Spanning tree port state still show "Forward" after port unlink. Situation 2: Spanning tree port state still show "Disable" after port link up. But if let port link-down then link-up, it will be ok. (i.e. the hardware issue waiting for recognition, this version don't solve.) 14. In "IGMP" testing, it has applicaiotn issue with Trunk that it can't change the Trunk Port of IGMP Join to other Trunk member after member port unlink. 15. In "IGMP" testing, if two Switch use trunk port(untag port) uplink to send report packet from one switch to another, confirming two Switch has Joined then send Leave packet, we will see just only one switch can Leave, another switch cannot Leave unless waiting for Host timeout. 16. In "SmartConsole Utility Firmware upgrade" testing, it will pop up triple error message continuously when upgrade wrong firmware in load mode. 17. In "802.1x" testing, there is preventable mechanism in Trunk port. But the mechansim would fail in the condition that we set the 802.1x function first, then do the TRUNK function setting. 18. In "Firmware and Config Backup" testing, we'll see Open file button. (i.e. it's a default download object in IE browser, we can not change it.) 19. In "Firmware and Config Backup" testing, Firmware and Config File cannot be saved if waiting time is too long (over 5-10 sec. approximately), when we want to save Config File Name and select the saved path. 20. In "SNMP Static Mac" testing, if we want to add a Static Mac item, input "Create and go" in SNMP setting, it will change to "Active" directly, caused Mac Address as 00-00-00-00-00-00. 21. In "SNMP" testing, cannot set Fiber Port to be Force Mode. 22. In "SNMP" testing, cannot active Mirror function setting. _____________________________________[END]______________________________________