DGS-3224TGR Firmware Release Note Firmware: 3.01.027 Hardware: A1/A2 Date: Oct. 28, 2005 Problems Resolved: 1. STP configuration cant be enabled by web interface. 2. After using tftp upload configuration to 3Com tftp server, DGS-3324SR might have session lock problem from Telnet/CLI Enhancements: New PROM code (version 0.01.007) can support both new (Atmel/ AT49BV163A-70TI) and existing Flash Rom. ================================================================= Firmware: 3.01.019 Hardware: A1 Date: Dec. 31, 2004 Enhancements: 1. IGMP Snooping support fast leave 2. Single IP Management v1.0 3. Port Description 4. CPU Utilization Monitoring 5. "Show Config" command 6. Support 802.1X MAC-based Access Control 7. TACACS+ 8. SSL 9. ACL based on Port, 10. ACL based on TCP/UDP payload 11. ACL Destination to CPU packet has to be filtered. Problems Resolved: 1. DGS-3224TGR will not respond to a ping or SNMP after about 2 to 12 hours of polling. The unit however will keep switching but the web management and SNMP are no longer accessible. Note: ACL and SSH module has been upgraded. If there is related configuration in previous firmware, this part must be re-configured after upgrading to this version. ================================================================= DGS-3224TGR runtime code release history (updated: Apr.22, 2004) Firmware 2.03.009 Bug fixed. N/A New features: 1.Copper ports support 1000 full force mode 2.Support tagged ARP packet of 64 bytes. 3.Upgrade PROM (version 0.01.005) and runtime code to support new flash and previous flash. 4.release D-view module v2.00R18 to match it. Notes: If you use previous flash, you dont need to update it. DGS-3224TGR runtime code release history (updated: Dec.26, 2003) Firmware 2.03.005 Bug fixed. N/A New features: 1. 802.1w Rapid Reconfiguration of Spanning Tree. 2. Asymmetric VLAN 3. Traffic Segmentation 4. 802.3ad Link Aggregation (LACP) 5.TACACS 6. Cisco like port security Notes: The 2.03.005 is exactly the same as the previous 1.03.005 firmware, except the version number. The change is for the consistency with other D-Link's switches on firmware version naming. First Release Firmware 1.02.021 (Oct.8, 2003) New features: First release version. For the features, please refer to the datasheet.